Jump to content
Testers Wanted: RUNNER Golf and Byrdie Golf Design ×

raw finish for driver crown


Recommended Posts

Hey guys,

 

My wife has been playing the Adams Super S driver for a while and she has collected her good share of skymarks with it.

 

I don't have the skills nor the tools to repaint the crown, so I was thinking... if I remove the paint completely (using sandpaper for example) and leave the "raw" finish, will it affect the club's properties (aerodynamics, weight, feel, etc.)?

 

I did the same procedure on a black TM putter and the raw feel looks much better than the black paint.

 

Appreciate any input from the experts.

Thanks!

:cobra-small: SpeedZone 9* w/ Aldila Rogue Silver 60 S
:callaway-small: X2 Hot 3 Deep 14.5* w/ Aldila Tour Green 75 S
:taylormade-small: JetSpeed 5W 19* w/ Matrix Velox T 69 S OR :adams-small: Super LS 3H 19* w/ Kuro Kage Black 80 S
:mizuno-small: JPX919 Forged 4-PW w/ Modus3 105 S
:titelist-small: Vokey SM7 50/08F, 54/14F & 58/08M w/ Modus3 115 Wedge
:EVNROLL: ER1 34" w/ SuperStroke Fatso 2.0
MfleKCg.jpg Pro / 9dZCgaF.jpgH2NO Lite Cart Bag / :Clicgear: 3.0 / :918457628_PrecisionPro: NX7 Pro LRF

My reviews: MLA Putter // Titleist SM7 // PING i500 // PuttOUT

Link to comment
Share on other sites

There should be no issues.  I played an F11 raw for a little while before repainting it and I actually really liked the look. 

 

Rather than dealing with sanding though if you use a product like Tal-Strip you can just spray the head and wipe it off with a paper towel and the paint will come with it.  Then you can go back over any spots that remain with another spray and use q-tips and toothpicks for any nooks and cranny's you have left.

Driver: :taylormade-small: SLDR w/ Fujikura Ventus Black

3w: :taylormade-small:'16 M2 hl w/ Diamana D+ 82

5w: :cleveland-small: Launcher HB w/ HZRDUS Yellow

Hybrid: :cleveland-small: 22 deg. Launcher HB w/ HZRDUS Black

Irons: :cleveland-small: 5i - gap Launcher CBX w/ Nippon Modus 3 125

Wedges: :cleveland-small: 54 CBX & 58 Zipcore w/ Nippon Modus 3 125

Putter: :odyssey-small: Red 7s

Link to comment
Share on other sites

Buy spray on Tal Strip II. Spray it on, wait 5-10 minutes and spray it off with a water hose. Paint=gone. No issues playing it raw as it's titanium and won't rust, only patina.

In The Bag
Driver: TaylorMade M2 (2017) w/ Project X T1100 HZRDUS Handcrafted 65x 
Strong 3 wood: Taylormade M1 15* w/ ProjectX T1100 HZRDUS handcrafted 75x
3 Hybrid: Adams PRO 18* w/ KBS Tour Hybrid S flex tipped 1/2"
4 Hybrid: Adams PRO 20* (bent to 21*) w/ KBS Tour Hybrid S flex tipped 1/2"
4-AW: TaylorMade P770 w/ Dynamic Gold Tour Issue Black Onyx S400

SW: 56* Scratch Tour Dept(CC grooves) w/ Dynamic Gold Spinner
LW: 60* Scratch Tour Department (CC grooves) w/ Dynamic Gold Spinner
XW: 64* Cally XForged Vintage w/ DG X100 8 iron tiger stepped
Putter: Nike Method Prototype 006 at 34"

Have a ton of back-ups in all categories, but there are always 14 clubs in the bag that differ depending on the course and set-up. Bomb and gouge. Yes, I'm a club gigolo.

Link to comment
Share on other sites

I'm tempted to do this to my driver. Just because I'd like the look of it being raw. 

 Driver:   :callaway-small:  Epic Flash 12 Degree

Wood: :callaway-small:  GBB 3 Wood
Hybrid: :callaway-small: Razr 4 hybriid stiff stock shaft.
Irons: :callaway-small: X2 Hot 4 iron (pro version) 5 iron - Gap Wedge (non pro version).  KBS 120g Shaft stiff cut 1/2  inch bent 1°upright
Wedges: :vokey-small: 52° 56° and 60°.
All grips are Golf pride grips midsized
Putter (lefty):  Odyssey Metal-X #8 34", stock shaft bent 2° Superstroke grip
Golf Balls:   :titelist-small: 2018-9 Pro-V1x and Prov1s
Shoes:  :footjoy-small:  Dryjoy tours

Link to comment
Share on other sites

Ditto! I'd like to buy a couple of cheap Rocketballz Stage 2's and strip off that Art Deco crap and see what they look like. Couldn't hurt.

bag - SunMountain Synch with Ogio Synergy X4 cart
driver - :callaway-small: Optiforce 440, Paderson Kevlar Green stiff 46.5"
fwoods - :taylormade-small: Jetspeed, 3HL regular
irons - :taylormade-small:  Speedblades 3-8, 85g stiff steel, 2 up
wedges - :edilon-small: Scor 40, 45, 50, 54, 58
putter - :ping-small: Ketsch 35" slight arc, SuperStroke 2.0 mid-slim
ball - :titelist-small: ProV1x

Link to comment
Share on other sites

Thanks for the feedback, guys.

I thought about sanding the finish to give it the brushed matte look.

Can't seem to find Tal Strip here in Germany, so I'll try this:

 

http://www.carson-modelsport.com/en/products/accessories/accessoriesgeneral/produktdetails.htm?sArtNr=908113

:cobra-small: SpeedZone 9* w/ Aldila Rogue Silver 60 S
:callaway-small: X2 Hot 3 Deep 14.5* w/ Aldila Tour Green 75 S
:taylormade-small: JetSpeed 5W 19* w/ Matrix Velox T 69 S OR :adams-small: Super LS 3H 19* w/ Kuro Kage Black 80 S
:mizuno-small: JPX919 Forged 4-PW w/ Modus3 105 S
:titelist-small: Vokey SM7 50/08F, 54/14F & 58/08M w/ Modus3 115 Wedge
:EVNROLL: ER1 34" w/ SuperStroke Fatso 2.0
MfleKCg.jpg Pro / 9dZCgaF.jpgH2NO Lite Cart Bag / :Clicgear: 3.0 / :918457628_PrecisionPro: NX7 Pro LRF

My reviews: MLA Putter // Titleist SM7 // PING i500 // PuttOUT

Link to comment
Share on other sites

That looks like it should work. 

 

Over here Tal-Strip is available at most autoparts stores.  That might be another place for you to check, but not sure what's available for stores over there.

Driver: :taylormade-small: SLDR w/ Fujikura Ventus Black

3w: :taylormade-small:'16 M2 hl w/ Diamana D+ 82

5w: :cleveland-small: Launcher HB w/ HZRDUS Yellow

Hybrid: :cleveland-small: 22 deg. Launcher HB w/ HZRDUS Black

Irons: :cleveland-small: 5i - gap Launcher CBX w/ Nippon Modus 3 125

Wedges: :cleveland-small: 54 CBX & 58 Zipcore w/ Nippon Modus 3 125

Putter: :odyssey-small: Red 7s

Link to comment
Share on other sites

anybody got a picture of a driver in it's raw finish?

Driver: image.png.6ba1c8a254ad57aa05e527b74c2e04ba.png0311 XF 10.5* w/Project X Cypher 40 gram Senior shaft or 0811 XF 12* w/Evenflo Riptide CB Senior shaft

Fairways:  image.png.80321f01fc46450b6f428c7daf7b3471.png0211 5W & 7W w/ Evenflo Riptide CB  regular shaft and Tour Edge E521 9W w/Fubuki HD50 regular shaft

Hybrid: None in bag at the moment

IronsTitleist T300 5-PW w/Fubuki MV Senior graphite shafts w/Golf Pride Tour

Wedges: Edison forged 49*, 53* and 57* wedges with KB PGI Senior shafts(80 grm).

Putter: 33” Evnroll ER6R or  ER2 or Bellum Winmore Model 707,   or Nike Method Core Drone  w/Evnroll Gravity Grip

Bag: Vice cart bag(Black/Lime). 

Ball: Snell MTB Prime X, Maxfli Tour/S/X CG, Titleist Pro V1x or Titleist TruFeel

Using Shot Scope X5 and Pinned Rangefinder

 

Link to comment
Share on other sites

In The Bag
Driver: TaylorMade M2 (2017) w/ Project X T1100 HZRDUS Handcrafted 65x 
Strong 3 wood: Taylormade M1 15* w/ ProjectX T1100 HZRDUS handcrafted 75x
3 Hybrid: Adams PRO 18* w/ KBS Tour Hybrid S flex tipped 1/2"
4 Hybrid: Adams PRO 20* (bent to 21*) w/ KBS Tour Hybrid S flex tipped 1/2"
4-AW: TaylorMade P770 w/ Dynamic Gold Tour Issue Black Onyx S400

SW: 56* Scratch Tour Dept(CC grooves) w/ Dynamic Gold Spinner
LW: 60* Scratch Tour Department (CC grooves) w/ Dynamic Gold Spinner
XW: 64* Cally XForged Vintage w/ DG X100 8 iron tiger stepped
Putter: Nike Method Prototype 006 at 34"

Have a ton of back-ups in all categories, but there are always 14 clubs in the bag that differ depending on the course and set-up. Bomb and gouge. Yes, I'm a club gigolo.

Link to comment
Share on other sites

This brings up a great question that I have always wondered about but kept forgetting to ask.

 

If you want to paint your clubs, whether it's just the numbers on your irons or even a whole wood, what is the best kind of paint to use?

 

I would love to be able to touch up some of my clubs when the paint starts to get beat up, but I want it to look good too.

"I'd play a ladies set of clubs if it allowed me to break par."

PING G410 LST Fujikura Pro 2.0 Tour Spec 6

Titleist 17, 19, and 21 degree 818 H2 Hybrids

Ping G700 5 - GW

Titleist Vokey SM7 54 Wedge

Titleist Vokey SM7 58 Wedge

Evenroll ER3

Snell MTB-X

Link to comment
Share on other sites

Touch ups are a little hard to do.  I've never been able to make it look exactly the same as the rest of the club unless you remove everything and start over.  Rookie will most likely have the best suggestions, but I've used automotive spray cans on a whole head redo and it worked out pretty well.  The key to any paint job though is prep work.  Make sure the prep is perfect and then multiple thin coats.

 

For paint filling numbers on irons (or putters, or any lettering) the Tamiya model paints work great and they have a ton of colors.  Testors also works pretty good and in a pinch you can always use nail polish as well.

Driver: :taylormade-small: SLDR w/ Fujikura Ventus Black

3w: :taylormade-small:'16 M2 hl w/ Diamana D+ 82

5w: :cleveland-small: Launcher HB w/ HZRDUS Yellow

Hybrid: :cleveland-small: 22 deg. Launcher HB w/ HZRDUS Black

Irons: :cleveland-small: 5i - gap Launcher CBX w/ Nippon Modus 3 125

Wedges: :cleveland-small: 54 CBX & 58 Zipcore w/ Nippon Modus 3 125

Putter: :odyssey-small: Red 7s

Link to comment
Share on other sites

We just had a hobby store open up in town. They are listed as a Tamiya dealer. I see purple and white in my future!

"I'd play a ladies set of clubs if it allowed me to break par."

PING G410 LST Fujikura Pro 2.0 Tour Spec 6

Titleist 17, 19, and 21 degree 818 H2 Hybrids

Ping G700 5 - GW

Titleist Vokey SM7 54 Wedge

Titleist Vokey SM7 58 Wedge

Evenroll ER3

Snell MTB-X

Link to comment
Share on other sites

Archived

This topic is now archived and is closed to further replies.

  • Recently Browsing

    • No registered users viewing this page.
×
×
  • Create New...