Jump to content
TESTERS WANTED! ×

How To Refurb A Scotty Cameron Studio Design 1


Recommended Posts

Hello People of MGS!


 


I just bought a Scotty Cameron Studio Design 1 this afternoon for the greatest price of the century (which I will not share as I was sworn to secrecy by my friend who works at the golf shop).  The reason why I received such a great deal on this putter was because it is a little beat up. The previous owner seems to have hit the ball off of the toe quite a lot, and it  did not come with a head cover so it is a bit rusted.  I will try and post pictures once my phone is working, but till then my description will have to do.  The black finish on sole is wearing away, and little speckles of rust are replacing it.  The back of the putter is fine, and the spin-milling on the face is still good but as I stated previously, the finish on the toe has faded away because the previous owner seems to have hit it off that side quite a bit.  I looked up how much it would cost to refurbish and authenticate the putter throughscottycameron.com, but it came out to about $408.00 (S+H included) and I don't have that kind of money.  So here are my questions: is there any way to get rid of the black finish and rust without destroying the spin milling on the face?  I also wanted to customize the paint a little on the back, face, and sole so I figured paint stripper and a cue-tip was the best way to get rid of the stock paint, but what should I use to repaint?  Thank you so much for reading, and any help is much appreciated.


 


Cheers,


Ryan


What's in my red Sun Mountain Swift X stand bag...

 

Driver-

:taylormade-small: .R1 TP white (set to 8.0*) with Aldila RIP Phenom Stiff Flex shaft

 

FWY Wood-

:taylormade-small:  R9 15* 3 wood

 

Hybrid-

:taylormade-small:  Rescue11 4 hybrid 21*ish (lowered to play closer to a 3/4 hybrid).

 

Irons-

:taylormade-small:  2014 Tour Preferred CB 5-PW

 

Wedges-

:taylormade-small:   Tour Preferred 51*

:vokey-small:  SM4 54*

:vokey-small:  SM4 58*

 

Putter(s)-

:cameron-small:  Studio Design 1 (I need a new Pistolero grip) -this is the club that I am currently gaming-

    :callaway-small:  Odyssey White Ice #7 with pink accents/orange Super Stroke 3.0

        

Ball-

:taylormade-small:  Tour Preferred x

:titelist-small:           Pro V1x

 

Shoes-

:footjoy-small:  Sport Spike less [black],

:footjoy-small:  Sport [white w/ black saddle]

 

Follow me on twitter at @Rien_Maolalaidh and instagram at @rien_o.maolalaidh

 

Cheers!

 

Link to comment
Share on other sites

Send it to The Putter Lounge.

How much would that cost though?  I'm a bit short on cash as I'm trying to start playing lacrosse again, and that takes up quite a bit of money. 

What's in my red Sun Mountain Swift X stand bag...

 

Driver-

:taylormade-small: .R1 TP white (set to 8.0*) with Aldila RIP Phenom Stiff Flex shaft

 

FWY Wood-

:taylormade-small:  R9 15* 3 wood

 

Hybrid-

:taylormade-small:  Rescue11 4 hybrid 21*ish (lowered to play closer to a 3/4 hybrid).

 

Irons-

:taylormade-small:  2014 Tour Preferred CB 5-PW

 

Wedges-

:taylormade-small:   Tour Preferred 51*

:vokey-small:  SM4 54*

:vokey-small:  SM4 58*

 

Putter(s)-

:cameron-small:  Studio Design 1 (I need a new Pistolero grip) -this is the club that I am currently gaming-

    :callaway-small:  Odyssey White Ice #7 with pink accents/orange Super Stroke 3.0

        

Ball-

:taylormade-small:  Tour Preferred x

:titelist-small:           Pro V1x

 

Shoes-

:footjoy-small:  Sport Spike less [black],

:footjoy-small:  Sport [white w/ black saddle]

 

Follow me on twitter at @Rien_Maolalaidh and instagram at @rien_o.maolalaidh

 

Cheers!

 

Link to comment
Share on other sites

I just wanted to give an update on my progress with my putter.  I was originally trying to remove the rust  by using the old coke and tin foil trick, but I realized that the tin foil was grinding down the spin milling on the scotty, and the coca cola wasn't removing the rust as I had hoped.  But then, just as I began to think all was lost, my dad came to the rescue with a magical car care spray called "A Must For Rust".  I sprayed it on the back of the putter and to my amazement not only did the rust dissapear, but so did the oxidized gun metal black finish (which is what i was hoping for).  So I continued to to spray it on, and found that using a little bit of tin foil to scrub off the sole, back, and sides helped a whole lot.  I was able to get rid of all of the noticeable rust spots on the club, as well as all of the black finish on the club, and I cleaned up all the paint and smoothe out the back.  I definately will be posting pictures as soon as my phone is charged, and I thank everyone who read and offered advice,  cheers

What's in my red Sun Mountain Swift X stand bag...

 

Driver-

:taylormade-small: .R1 TP white (set to 8.0*) with Aldila RIP Phenom Stiff Flex shaft

 

FWY Wood-

:taylormade-small:  R9 15* 3 wood

 

Hybrid-

:taylormade-small:  Rescue11 4 hybrid 21*ish (lowered to play closer to a 3/4 hybrid).

 

Irons-

:taylormade-small:  2014 Tour Preferred CB 5-PW

 

Wedges-

:taylormade-small:   Tour Preferred 51*

:vokey-small:  SM4 54*

:vokey-small:  SM4 58*

 

Putter(s)-

:cameron-small:  Studio Design 1 (I need a new Pistolero grip) -this is the club that I am currently gaming-

    :callaway-small:  Odyssey White Ice #7 with pink accents/orange Super Stroke 3.0

        

Ball-

:taylormade-small:  Tour Preferred x

:titelist-small:           Pro V1x

 

Shoes-

:footjoy-small:  Sport Spike less [black],

:footjoy-small:  Sport [white w/ black saddle]

 

Follow me on twitter at @Rien_Maolalaidh and instagram at @rien_o.maolalaidh

 

Cheers!

 

Link to comment
Share on other sites

It'd be cheaper to send it to BOS, and they were Scotty's original shop that did his finishes as well as milled a lot of the earlier putters of his.  It was only after the falling out as a result of the owner's son doing some shady stuff that they quit sending them a lot of the stuff that was sent in to the Custom Shop.  But they still do the refinishes.  And they're the best in the business to restore older Scotties to original status.  As they milled a lot of the heads and finished them originally.  Just saying.

In The Bag
Driver: TaylorMade M2 (2017) w/ Project X T1100 HZRDUS Handcrafted 65x 
Strong 3 wood: Taylormade M1 15* w/ ProjectX T1100 HZRDUS handcrafted 75x
3 Hybrid: Adams PRO 18* w/ KBS Tour Hybrid S flex tipped 1/2"
4 Hybrid: Adams PRO 20* (bent to 21*) w/ KBS Tour Hybrid S flex tipped 1/2"
4-AW: TaylorMade P770 w/ Dynamic Gold Tour Issue Black Onyx S400

SW: 56* Scratch Tour Dept(CC grooves) w/ Dynamic Gold Spinner
LW: 60* Scratch Tour Department (CC grooves) w/ Dynamic Gold Spinner
XW: 64* Cally XForged Vintage w/ DG X100 8 iron tiger stepped
Putter: Nike Method Prototype 006 at 34"

Have a ton of back-ups in all categories, but there are always 14 clubs in the bag that differ depending on the course and set-up. Bomb and gouge. Yes, I'm a club gigolo.

Link to comment
Share on other sites

It'd be cheaper to send it to BOS, and they were Scotty's original shop that did his finishes as well as milled a lot of the earlier putters of his.  It was only after the falling out as a result of the owner's son doing some shady stuff that they quit sending them a lot of the stuff that was sent in to the Custom Shop.  But they still do the refinishes.  And they're the best in the business to restore older Scotties to original status.  As they milled a lot of the heads and finished them originally.  Just saying.

Do they have a website, or how would I get in touch with them?  How much would it cost to get the blue oxide finish and the milling redone as well.  I was only trying to remove the finish because someone had totally worn away the finish on the toe, and let it rust everywhere else so when I sprayed it down, it removed everyting.  Is there any way to shine/polish it up, because at the moment it just looks like a crude steel finish.

What's in my red Sun Mountain Swift X stand bag...

 

Driver-

:taylormade-small: .R1 TP white (set to 8.0*) with Aldila RIP Phenom Stiff Flex shaft

 

FWY Wood-

:taylormade-small:  R9 15* 3 wood

 

Hybrid-

:taylormade-small:  Rescue11 4 hybrid 21*ish (lowered to play closer to a 3/4 hybrid).

 

Irons-

:taylormade-small:  2014 Tour Preferred CB 5-PW

 

Wedges-

:taylormade-small:   Tour Preferred 51*

:vokey-small:  SM4 54*

:vokey-small:  SM4 58*

 

Putter(s)-

:cameron-small:  Studio Design 1 (I need a new Pistolero grip) -this is the club that I am currently gaming-

    :callaway-small:  Odyssey White Ice #7 with pink accents/orange Super Stroke 3.0

        

Ball-

:taylormade-small:  Tour Preferred x

:titelist-small:           Pro V1x

 

Shoes-

:footjoy-small:  Sport Spike less [black],

:footjoy-small:  Sport [white w/ black saddle]

 

Follow me on twitter at @Rien_Maolalaidh and instagram at @rien_o.maolalaidh

 

Cheers!

 

Link to comment
Share on other sites

Do they have a website, or how would I get in touch with them?  How much would it cost to get the blue oxide finish and the milling redone as well.  I was only trying to remove the finish because someone had totally worn away the finish on the toe, and let it rust everywhere else so when I sprayed it down, it removed everyting.  Is there any way to shine/polish it up, because at the moment it just looks like a crude steel finish.

 

It'd be cheaper to send it to BOS, and they were Scotty's original shop that did his finishes as well as milled a lot of the earlier putters of his.  It was only after the falling out as a result of the owner's son doing some shady stuff that they quit sending them a lot of the stuff that was sent in to the Custom Shop.  But they still do the refinishes.  And they're the best in the business to restore older Scotties to original status.  As they milled a lot of the heads and finished them originally.  Just saying.

And thanks so much for the advice.  Cheers.

What's in my red Sun Mountain Swift X stand bag...

 

Driver-

:taylormade-small: .R1 TP white (set to 8.0*) with Aldila RIP Phenom Stiff Flex shaft

 

FWY Wood-

:taylormade-small:  R9 15* 3 wood

 

Hybrid-

:taylormade-small:  Rescue11 4 hybrid 21*ish (lowered to play closer to a 3/4 hybrid).

 

Irons-

:taylormade-small:  2014 Tour Preferred CB 5-PW

 

Wedges-

:taylormade-small:   Tour Preferred 51*

:vokey-small:  SM4 54*

:vokey-small:  SM4 58*

 

Putter(s)-

:cameron-small:  Studio Design 1 (I need a new Pistolero grip) -this is the club that I am currently gaming-

    :callaway-small:  Odyssey White Ice #7 with pink accents/orange Super Stroke 3.0

        

Ball-

:taylormade-small:  Tour Preferred x

:titelist-small:           Pro V1x

 

Shoes-

:footjoy-small:  Sport Spike less [black],

:footjoy-small:  Sport [white w/ black saddle]

 

Follow me on twitter at @Rien_Maolalaidh and instagram at @rien_o.maolalaidh

 

Cheers!

 

Link to comment
Share on other sites

  • 1 month later...

You've done the difficult part...now polish it up with 0000 steel wool, degrease with an acetone rub, dry thoroughly with a microfiber cloth, then google how to do a torch/flame finish.  You'll have a great putter with a unique finish and you did it yourself.

Driver:  TM 2009 Burner, 10.5*, stock stiff

Fairway:  Adams XTD Ti 15*, Aldila Voodoo stiff

Hybrid:   Adams XTD Ti 19*, Ozik Matrix Red Tie stiff

Hybrid:  Adams XTD Ti 23*, Ozik Matrix Red Tie regular

Irons:  Cobra S3, 5-PW, Nippon NS Pro 1030H regular

Wedges:  MacGregor VIP V-foil, 48*-4*, 52*-6*, 56*-10*, 60*-2*

Putter:  TearDrop TD 42, 35", Tiffany blue leather stitch-back grip

Ball:  TM, Srixon

Bag:  Titleist stand bag, black with Campbell of Argyle headcovers

Shoes:  adidas Pure Motion and lucky purple socks

 

 

Link to comment
Share on other sites

Sorry, missed this. Their site is www.bosgolf.com

 

They used to be who Scotty sent the restores too. They had a falling out due to August's son doing some shady things and stealing a tour stamp or two. Here's the story: http://legacy.utsandiego.com/news/northcounty/20031016-1514-putters.html

 

They used to own some of the patents and did a lot of his mill work. That ceased and Scotty quit sending them refinishes. But they still do refinishes and do a phenomenal job.

 

As far as finishes, you're going to have rust issues unless you really take a lot of time and effort to keep it clean and rust free. If you don't mind the maintenance, I'd go for it. But if you want lower maintenance, there are other finish options to explore.

In The Bag
Driver: TaylorMade M2 (2017) w/ Project X T1100 HZRDUS Handcrafted 65x 
Strong 3 wood: Taylormade M1 15* w/ ProjectX T1100 HZRDUS handcrafted 75x
3 Hybrid: Adams PRO 18* w/ KBS Tour Hybrid S flex tipped 1/2"
4 Hybrid: Adams PRO 20* (bent to 21*) w/ KBS Tour Hybrid S flex tipped 1/2"
4-AW: TaylorMade P770 w/ Dynamic Gold Tour Issue Black Onyx S400

SW: 56* Scratch Tour Dept(CC grooves) w/ Dynamic Gold Spinner
LW: 60* Scratch Tour Department (CC grooves) w/ Dynamic Gold Spinner
XW: 64* Cally XForged Vintage w/ DG X100 8 iron tiger stepped
Putter: Nike Method Prototype 006 at 34"

Have a ton of back-ups in all categories, but there are always 14 clubs in the bag that differ depending on the course and set-up. Bomb and gouge. Yes, I'm a club gigolo.

Link to comment
Share on other sites

Archived

This topic is now archived and is closed to further replies.

  • Recently Browsing

    • No registered users viewing this page.
×
×
  • Create New...