Jump to content

McGolf

Member
  • Content Count

    344
  • Joined

  • Last visited

Everything posted by McGolf

  1. Would be a good resource because if it had that info it surely would have more other interesting factiods too. Keep in mind with todays drivers you may have to ask weather that includes the adjustable tip.
  2. You could meet the needs of most golfers with most makers, To me for top end is more about quality, The Bettinardi folks have established certain quality standards as allowable, Toulon does testing and gather acceptance from professionals as does Scotty.
  3. For top end type putters: to name a few Betts, Scotty Piretti Toulon when getting one just get a fitting to ensure it stays a friend once purchased.
  4. 1) You could have just extended the shafts 1" The KBS imo is a better shaft. 2) Remove the weights and reinstall them. It to ensure the epoxy gets into the space inside and out of the shaft and the hosel. Dirt is not you friend and there is plenty in there if you take it out. 3) Yes the swing weight will go up making the length longer. If you are putting on larger grips it will balance a good portion of the SW added from the length.
  5. How many balls did you guys really hit to make that scene?
  6. McGolf

    D v D 2

    That's What I said in my video in the review up to date. The D v D is an awesome marketing tool to bring notoriety to the brand. They made serious improvements to the series from the last one for sure. Im also in agreement about the LM numbers seeming a little dodgy. I'm hoping what we didn't see was the serious amount of real testing being done on the models say in comparison to other OEMs to make sure a dud isn't being brought to market. What I haven't heard is that is better than my gamer. Pros and Cons Pro: Wilson is getting new and modern designs. The real weakness fo
  7. I was thinking of the original statement of the using a weight to check Freq. If you used a singular weight it would be expected to go up as you check the flex. The head weight increases as you go down the set. The shaft compensates for that too.
  8. You don't want to make them longer that wouldn't help your game you don't want to make them heavier and rightfully so the much added weight may throw you off as well. Sounds like your stuck putting them together and giving them a go. If the lower end doesn't work then you are better for the experience.
  9. not being a smart a$$ - don't. if you don't have a puller you risk damaging the shaft as you already know, right tool for the right job. There are inexpensive pullers that are not the brightest shiniest tool out there but work. A small invest could save you big $$$$ in new replacements. screw type pullers. maybe even a used one in the Mitchell stable might do the trick. If not look up GW
  10. If you mic'd the shafts above the hosel ? ferrules and came up with 365 chances are the shafts you are looking for are .355 In either case you cold just ream the hosels to accept the 370 and then have a lot of options available to install if he intends on playing the clubs. If its for a memento then staying original is better. Lastly if you are going to replace them then pull the shaft and actually gauge the hosel to ensure you are getting the correct ones and saving a bit of time
  11. Had to go look up the driver. Just my opinion. The tungsten weight in the back is competing with the removable weight. The more weight added could pull back the CoG a bit to make the club feel more lofted and less active while allowing the club to hang a bit open at impact. Where the lighter weight pushed the CoG forward and having the opposite affect. Again I would be guessing the 7g weight is the one designed to be installed for most golfers and off the rack models. Where the other weights tweak for feel, slight directional control changed ETc.
  12. back to the original post. What is the problem? Did you buy the cobras with the lighter shafts and find out that 120s were better for you? Do you not like the 120s? Its late so I may be missing it. Thanks
  13. Just did a video reshafting some of the irons. They are impressive. For those of us that stand on the right side of the ball if they can't offer a wood in the category it wont matter how good it is (sad face). Lets hope they did good enough last year to add us.
  14. Don't get hung up on matching the SW. the 2 to 2.5" change makes it nearly impossible to match in conventional terms, tip weights, tape. You might need the tungsten powder down the shaft to get in the right range.
  15. chances are it has a pin you will have to take out and if you like the original look put back in. That hasn't been done well since the time of that iron. When I certified as a clubmaker, it was the first of only two times I needed to do that. Second - the tip section in the day was smaller than now. I cant tell you if that model was one but you are in the neighbor hood of needing a smaller taper tip shaft. Third - going from a 2I to a 7I in length will already mess with the SW not to mention the larger grip. meaning light!
  16. One of the first questions I ask in the fitting is - are you brand sensitive. meaning is there a brand you particularly want or do you care. If the golfer likes or certainly wants a brand we don't carry we get on the computer and go over specs of the club brand of choice. I have gone so far as to call another company we don't carry to order a set via the local rep so the player can get what they want. It is impractical to carry every brand particularly in my area (rural).
  17. Excellent!! glad to hear it s working, another reason for the lefts could have been the large offset the Eye2s have. The clubs are great no doubt it, sounds like you are a golfer that just needed less offset with the shafts.
  18. Going forward if you like the softer feel and want a longer wear time look into the CP2 line from golf pride. Not as soft as Winn BUT a good tacki feeling and the low taper rate is nice too
  19. Thanks, If you or anyone else on the forum wants to see something or has a question just let me know. Always looking for content to make videos.
  20. TO answer the question, yes there is a limited number of back and forth adjustments you can make. Just keep an eye on the hosel for deterioration
  21. if the club is pinned, there could be something hanging around that area
  22. Some fitting areas/ shop do putter fittings, you might try that to find all the specs.
×
×
  • Create New...