Jump to content


  • Posts

  • Joined

  • Last visited

Everything posted by CRW

  1. I think it’s mostly a fitting issue. Someone with a slower swing might opt for lower loft to get some easier distance back, or they might need higher loft to get enough spin to carry. I swing on the fast side (~100 mph with a 7i) with slightly too shallow of an attack angle and was fit into stronger lofted clubs to get my launch and spin manageable.
  2. You could also check out the Club Cameron covers available online. I have the same putter/cover you have and went with this one:
  3. Used, RH, New Level 902 Forged 4-PW, True Temper Dynamic Gold Tour Issue X100 shafts, stock length/loft/lie, Golf Pride standard MCC Plus4 blue grips. $500 shipped. SOLD
  4. I picked up a GoGoGo a month or so ago and it’s terrible. Mine does the same thing so I have to scan 5+ times every time to get a distance I think is accurate. It was $100 bucks, so I’ll use it for a year or so and replace it with a better unit. I would avoid PrecisionPro as well. The GoGoGo replaced my NX7 that lasted about 3 years before a solder point failed. They don’t service them and I couldn’t fix it based on how they are built. They offered a coupon code for a new one, but I don’t want to spend $200-300 for something that’s only going to last a few years. To put it in perspective, my 8 year old Bushnell V3 still works just fine. That’s a testament to the build quality over Precision Pro’s and other cheaper options. It’s in my sons bag currently. So my next is likely to be another Bushnell.
  5. All prices are OBO Used, RH, New Level 902 Forged 4-PW, True Temper Dynamic Gold 120 X100 shafts, stock length/loft/lie, Golf Pride midsize Tour Velvet grips. $350 shipped. SOLD New PXG labeled black Lamkin Z5 grips - 9 standard, 2 midsize - $100 shipped for all, but will break up. SOLD Used, RH, New Level NLU-01 18* Utility, factory length/loft/lie, Project X HZRDUS Smoke Black RDX 100 in 6.5/X-flex, with Golf Pride standard size blue MCC Plus4 grip. $125 shipped. SOLD Used, RH, Vokey SM8 Wedge Set - 50.08F, 54.10S, 58.10S - stock length/loft/lie, stock True Temper wedge flex shafts, Golf Pride standard sized blue MCC Plus4 grips. $325 shipped or $115 each. SOLD Used Rose and Fire Head covers in black ballistic nylon. Driver, 3 wood, Alignment stick. $50 for entire set or $20 each shipped. SOLD Used MCA Diamana S+ Limited 60 X shaft with PXG adapter and Golf Pride Standard sized blue MCC Plus4 grip. 44.25”. $50 shipped. SOLD Used MCA Tensei AV Raw White 70 X shaft with PXG adapter, 42.5”, Golf Pride standard sized blue MCC Plus4 grip. $75 shipped. SOLD
  6. For sale, all used: TSi2 15* 3W, plays slightly shorter than stock at approximately 42.5” and has a +4 gm weight installed to get it to around D2/3 swing weight. The shaft is a MCA Tensei AV Raw White 75 Stiff with a Golf Pride Tour Velvet Midsize grip installed logo down in the A1 position of the adapter. The stock weight and head cover are included. There is a thin line of paint chipped along the crown where it meets the face. $150 shipped. SOLD Wilson Staff Model Wedges, 50/08, 54/11, and 58/10 TG. All stock length/loft/lie, with stock TT Dynamic Gold 120 S300 shafts, and Golf Pride Tour Velvet midsize grips installed logo down. $150 shipped. SOLD MCA Tensei AV Raw White 90HY stiff shaft, approximately 39.25” and was the stock shaft in a TSi3 3 hybrid purchased off the rack at stock length (40” playing length). Includes factory installed Titleist adapter and Golf Pride Tour Velvet midsize grip installed logo down in the A1 position of the adapter. $75 shipped. SOLD
  7. I thought the Smoke Black in a similar weight/flex was softer than the original Black. I liked the original and didn’t care for the smoke. I played the RDX in TX in several weights/clubs and found them to be more like the 6.5 flex in the original Black. But like everything else, you need to hit them to know if it will work for you.
  8. I have a TSi2 15* head I’d trade. Mine has some use though. I’ll message you some pictures later this evening.
  9. Take it to the fitter and have them look at it? If that's not an option I'd be pulling the grip to examine what's going on.
  10. I am more accurate with the driving iron on average but that is because I have a tendency to hook hybrids. I think I've had a terrible mis-hit 1 time this year with my driving iron. Last year and early this year I had a ton of terrible mis-hits with my hybrid. It might be the specific hybrid I had, but I've had bad experiences in the past so I tend to avoid them most of the time.
  11. I think given your skill (based on your listed index) it is going to be head category (lower spinning options) and loft. I just went through a fitting Saturday on GCQuad. I'm a little slower at the moment (around 117 mph) but with a very aggressive transition, and ended up in TSi4 8* head turned down to 7.25*. That got me averaging under 2500 rpms with the TP5x golf ball. The SIM line wasn't low spin enough. The next closest out of what I had time to try were the Epic MAX LS and Cobra Radspeed.
  12. I’m using the New Level utility and have been happy with it. I had the P790 UDI last year and they perform similarly for me. The New Level has a slightly wider sole, but they narrow the head as it approaches the top line so it doesn’t look wide at address. https://www.newlevelgolf.com/online-store/NLU-01-Utility-Irons-p227515327
  13. Odyssey Stroke Lab Seven putter, 34”, used - $175 shipped Titleist TSi4 9* driver with RDX Black 70 TX shaft and Lamkin UTX standard grip, shaft tipped 1” and playing at 45”, used. Head has a mark on the clear coat in the high toe area. - $OLD Arccos Sensors. 13 standard and 1 putter. Used. Will require a new subscription. $OLD to @RDel90 Trade interests - New/like new Vokey wedges, low spinning urethane balls, midsize golf pride grips, cabretta gloves.
  14. I use a Mitchell Signature and haven’t seen this issue. Though I don’t build for others so I don’t have a massive volume of work under my belt. If the scoring lines in the club are level you can use them as a reference to insure the club is mounted into the machine properly. I guess the top clamp could allow for some margin for error in the loft (not lie), but I haven’t seen that either. Though, I’m not afraid of marring my clubs and clamp down tight every time. I’ve even gone so far as to bend clubs numerous times going back and forth from the shop to the range at my club testing different lofts/lies for me across different clubs/offset and different shafts. When I put the club back in the machine I always got the same numbers I had when I bent it. I don’t trust the OEM’s to get specs right, as I’ve never had a set arrive that was 100% to spec. But I don’t blame the equipment, I blame the staff. Either they are rushed to get equipment out or they are lazy. The tolerances provided by some OEM’s are for C.Y.A purposes.
  15. If the loft/lie machine is properly secured and installed on a level surface there should be no "tolerance". An angle is an angle. If a loft/lie machine is off it's user error. Either from being installed incorrectly or not securing the club in the machine correctly.
  16. I tried it and didn't find it to be bad performing shaft, but I like stiff/heavy/low torque shafts. However, I did return it because of the epoxy issues that happened with both shafts I received from them. The second I just returned for a refund, which they said would be no problem. Then I never got a refund. I eventually had to file a claim on my credit card to get my money back. I would say stay as far away from this company as possible.
  17. One who is looking for the coverage. I think @Berg Rymancovered the why better than I could have. Like I said, I'm not opposed to him playing, but I think someone(s) are losing out because of it. Maybe the coverage this brings to the school and their program will pay dividends for others in the long run, but to act like that's not what is going on is disingenuous at best.
  18. No, I don’t think the coach would have put a better player in that spot. The guy shot an 83 his first round out. There have to be literally thousands of potential college athletes without a spot that could out perform him. He’s there because of who he is.
  19. This thread and all the media coverage is the limelight. It wouldn’t have mattered what school he played at, being a former NBA player will keep him in coverage for the foreseeable future. Probably right up until he’s done playing.
  20. I'm not opposed to him playing, but I feel like there is some young potential player that is losing out so this guy can stay in the limelight.
  21. TSi4 9* w/RDX Black 70TX - $549.00 TSi3 15* w/RDX Black 80TX - $299.00 TSi3 19* w/RDX Black 90 6.5 - $279.00 T100s (2021) 4-PW w/TI X100 - $1477.00 Vokey SM8 Wedges (50/54/58) w/TI S400 - $554.97 Scotty Newport 2 - $399.99 $3,558.96 for 14 clubs with upgraded shafts in the irons/wedges. The TX in the 70/80 are no upcharge options.
  22. It's a stupid rule - a solution in search of a problem. I'm not sure what else to say about it.
  • Create New...