Jump to content

mjtgolf1911

Member
  • Content Count

    17
  • Joined

  • Last visited

Everything posted by mjtgolf1911

  1. Guy I work with has it and loves it! Switched from Game Golf to it. Nothing but good things to say
  2. - Mike - Troy, Michigan - Currently use Game Golf Live and enjoy it. Tried utilizing Arccos device but didnt like carrying my phone in my pocket - I do not use a watch currently - Typically use the Game Golf GPS app and a range finder Thanks for the opportunity!
  3. Mike T - Michigan HDCP- 10 Driver- Taylormade R1 Rogue Black 70g S Swing Speend: 115 mph 275 carry Staffer: Phil Mickelson
  4. My first project repainting my SM6s this off season. They were already the black finish wedges, but I decided to change them up and go with a Master's Color scheme for this year. Here is to hoping it brings out the best of my short game this summer!
  5. Trying to do a clear paint fill on the weights for my Scotty. Did a color fill on the numbers and let dry for days, but when i try to fill with the Tamiya clear it causes the color paint in the numbers to bleed and run. What is causing this since the paint has dried for days and its another paint on top of it? Any suggestions?
  6. I will give the Tamiya white a shot this weekend to see how it matches up to the 16' M2. Finally started to work on the Scotty a little bit and decided to mess with my wedges as well. Going for a Master's them on my wedges, hopefully inspires a better short game! lol First time doing my own paint job and these were done without needle tip applicators. (Those should arrive today) Way to time consuming with a toothpick and acetone to clean the edges
  7. Does anyone have any extra authentic Scotty Cameron socket tools to remove the putter weights? The aftermarket ones that are the t-handles don't provide enough torque to break the factory seal. Let me know if anyone has one for sale. Thanks!
  8. Going to start working on my first Scotty re-paint this weekend! Got my Tamiya paints and all the supplies, just need to set the time aside to start the project. A side question though, does anyone know what white paint will match best to a Taylormade M2? buddy of mine need his touched up and wasnt sure if the Tamiya White Gloss would work. Anybody used that point or something different for an M2 touch up?
  9. Detroit Area Show is March 10th - 12th
  10. What flex do you have it in? I might be interested since you already have the R1 adaptor in it Sent from my SM-N910V using MyGolfSpy mobile app
  11. Haha if only it was consistent.....and controlled. Definitely going to look into a local fitting Sent from my SM-N910V using MyGolfSpy mobile app
  12. Sorry guys, should have been much more specific with the post. Currently i play the x-stiff that came with the R1, gotta double check exactly which shaft it is. I would prefer a high kick point since I already launch the ball high as it is. Was never fitted for my driver, just bought it knowing that the shaft had a high kickpoint and was x-stiff. Have swing speed over 105mph consistently and usually average 300 off the tee...control is typically the issue, so looking to change something up. Also, like to tinker with equipment so thought this might be a fun change up
  13. Hey Guys, Looking for some feedback/ideas for a relatively decent priced x-stiff shaft that I can swap in and out of my R1 driver. Looking at possibly bringing a shorter shaft into play for tighter courses and toying with the idea. Dont want to blow a bunch of money on an experiment, but thought it would be worth a shot. Thanks! Mike
  14. Where abouts in Italy? My grandfather is San Marinian Sent from my SM-N910V using MyGolfSpy mobile app
  15. What type of stripping process are you guys using for the paints? And what type of paint are you using to redo the logos and extras. Looking to get into customizing clubs more. The first time i did some irons I just used nail polish and some clear coat the wife had laying around lol
  16. Hey everyone! New member here from Troy, MI. A little north of Detroit for those not familiar with the area. I am an avid golfer who typically gets out to hit the ball atleast once a week during the summer months. Used to work as a golf club technician back in college for Dick's Sporting Goods. Love talking specs on clubs and discussing equipment in general. I am about a 10 handicap who plays Taylormade PSi irons and Vokey Sm6 wedges. R1 driver and R9 TP 3 wood. And cant forget good ol' Scotty for the flat stick. Look forward to getting involved on the form and talking golf with everyo
×
×
  • Create New...