Jump to content
Testers Wanted: Star Grips! ×

Manimal26

 
  • Posts

    350
  • Joined

  • Last visited

Reputation Activity

  1. Like
    Manimal26 reacted to Micah T in The Maltby Challenge - unofficial review   
    2nd that!


    Sent from my iPhone using MyGolfSpy
  2. Like
    Manimal26 got a reaction from sirchunksalot in The Maltby Challenge - unofficial review   
    First thank you to @Popeye64 for hooking me up with a maltby 7i and a brand new wedge.
    please help me tag people who want to follow this that I am missing @Chip Strokes @dlow206 @Hotdocta @Popeye64
    This has been a long time coming, but because of covid it took a long time to get a few single modus 125 wedge shaft and a few single modus 120TX 7i shaft so the playing field is as even as possible. I will be using fully built clubs and not club connex to give everything the fairest chance.
    this will be broken down into 2 categories. Wedge and Iron. And of course this is subjective to me only, but if it performs I will give me honest opinion. Wedge will be first followed by irons incase we need to expand past the 7i for a better view
    for the wedge the Maltby (56*) will be going up against my gamer the Mizuno T20 the new TW MG2 and what some would consider the holy grail the Mirua tour wedge. All will be built with a modus 125 wedge shaft lie angle bent to 62* and loft at 56*. Length will be 35.5”. Grip will be the NDMC black on black and swing weight will be made to D5.
    wedge scoring
    1. Launch monitor performance including the wet wedge test. I will rent a trackman and hit enough balls to get a good data set. This is the most important factor for me since I play in Texas. (35%)
    2. Bunker performance. I will film shots and post a video. Volvik was kind enough to donate 3 boxes of the new S4 balls in multiple colors so we can track and see the results clearly. Workability proximity to the hole durability etc will be how this is scored. (25%)
    3. on course performance. I will head to a par 3 course that has a 105 yard hole. 3/4 56 with my gammer I can carry 115 with 13k in spin. Same deal as the bunker, but will also factor in s*** shipping ability. (25%)
    4. Ease of assembly. This is important because many people who purchase maltby build themselves. I have taken everything apart to the component level. When I bend them I want to see how long everything stays in place. I will take before and after measurements. I figure it will have about 500 balls on it so should be a good test. (10%)
    5. This will be the first scoring but the least weighted. It is shelf appeal. While this is not the purpose major OEM’s use this to get us to buy. Also wedges are speciality clubs IMO and I don’t care as much about the look of I did I would not have the T20 as my gammer since it’s ugly. (5%)
    Iron scoring
    This will be the same for the most part except the weighting will be a tad different. Specs will also be D3.5 playing at 37.25” lie angle of 61* loft will all be adjusted to 33* to standardize. Shaft will be the modus 120TX. Grip will be the either the Lamkin st-2 hybrid midsize or ts1 midsize since I will be out of the NDMC. Contestants will be the Maltby Ts1-forged vs my gamer the Mizuno mp20 MMC the honma tr20v srixon zx7 and maybe one more tbd. Stock carry at 34* loft is 186 yards. (My Mp20 mmc are -2 weak)
    1. Launch monitor. (25%) I don’t really care much about this with irons I just want to know carry & spin and shot grouping.
    2. bunker performance (anyone who knows my game knows I am a magnet for the fairway bunker). (Part of on course)
    3. On course performance. This will be the highest weighted category. The same par 3 course has a hole with a 190 yard pin in the middle which I would use a 7i they also have a hole with a 175 yard front pin which I would play a cut into also with a 7i. Will also hit a course and test approach shots and situations. (40%)
    4. Ease of assembly. (15%)
    5. Curb appeal. (20%) this is higher because of the overall cost of investment. It will also be the first category scored once I get all the heads in. This is also more important to me because the look has a lot to do with how you feel it might interact with the turf among other factors. 
     
    stay tuned first video comes this week!
  3. Like
    Manimal26 got a reaction from BH43 in The Maltby Challenge - unofficial review   
    First thank you to @Popeye64 for hooking me up with a maltby 7i and a brand new wedge.
    please help me tag people who want to follow this that I am missing @Chip Strokes @dlow206 @Hotdocta @Popeye64
    This has been a long time coming, but because of covid it took a long time to get a few single modus 125 wedge shaft and a few single modus 120TX 7i shaft so the playing field is as even as possible. I will be using fully built clubs and not club connex to give everything the fairest chance.
    this will be broken down into 2 categories. Wedge and Iron. And of course this is subjective to me only, but if it performs I will give me honest opinion. Wedge will be first followed by irons incase we need to expand past the 7i for a better view
    for the wedge the Maltby (56*) will be going up against my gamer the Mizuno T20 the new TW MG2 and what some would consider the holy grail the Mirua tour wedge. All will be built with a modus 125 wedge shaft lie angle bent to 62* and loft at 56*. Length will be 35.5”. Grip will be the NDMC black on black and swing weight will be made to D5.
    wedge scoring
    1. Launch monitor performance including the wet wedge test. I will rent a trackman and hit enough balls to get a good data set. This is the most important factor for me since I play in Texas. (35%)
    2. Bunker performance. I will film shots and post a video. Volvik was kind enough to donate 3 boxes of the new S4 balls in multiple colors so we can track and see the results clearly. Workability proximity to the hole durability etc will be how this is scored. (25%)
    3. on course performance. I will head to a par 3 course that has a 105 yard hole. 3/4 56 with my gammer I can carry 115 with 13k in spin. Same deal as the bunker, but will also factor in s*** shipping ability. (25%)
    4. Ease of assembly. This is important because many people who purchase maltby build themselves. I have taken everything apart to the component level. When I bend them I want to see how long everything stays in place. I will take before and after measurements. I figure it will have about 500 balls on it so should be a good test. (10%)
    5. This will be the first scoring but the least weighted. It is shelf appeal. While this is not the purpose major OEM’s use this to get us to buy. Also wedges are speciality clubs IMO and I don’t care as much about the look of I did I would not have the T20 as my gammer since it’s ugly. (5%)
    Iron scoring
    This will be the same for the most part except the weighting will be a tad different. Specs will also be D3.5 playing at 37.25” lie angle of 61* loft will all be adjusted to 33* to standardize. Shaft will be the modus 120TX. Grip will be the either the Lamkin st-2 hybrid midsize or ts1 midsize since I will be out of the NDMC. Contestants will be the Maltby Ts1-forged vs my gamer the Mizuno mp20 MMC the honma tr20v srixon zx7 and maybe one more tbd. Stock carry at 34* loft is 186 yards. (My Mp20 mmc are -2 weak)
    1. Launch monitor. (25%) I don’t really care much about this with irons I just want to know carry & spin and shot grouping.
    2. bunker performance (anyone who knows my game knows I am a magnet for the fairway bunker). (Part of on course)
    3. On course performance. This will be the highest weighted category. The same par 3 course has a hole with a 190 yard pin in the middle which I would use a 7i they also have a hole with a 175 yard front pin which I would play a cut into also with a 7i. Will also hit a course and test approach shots and situations. (40%)
    4. Ease of assembly. (15%)
    5. Curb appeal. (20%) this is higher because of the overall cost of investment. It will also be the first category scored once I get all the heads in. This is also more important to me because the look has a lot to do with how you feel it might interact with the turf among other factors. 
     
    stay tuned first video comes this week!
  4. Like
    Manimal26 got a reaction from HardcoreLooper in Maltby really upping their game...TS-1 Forged Hollow body Irons   
    Things are coming along will open a thread in the next few days
  5. Like
    Manimal26 got a reaction from fixyurdivot in The Maltby Challenge - unofficial review   
    First thank you to @Popeye64 for hooking me up with a maltby 7i and a brand new wedge.
    please help me tag people who want to follow this that I am missing @Chip Strokes @dlow206 @Hotdocta @Popeye64
    This has been a long time coming, but because of covid it took a long time to get a few single modus 125 wedge shaft and a few single modus 120TX 7i shaft so the playing field is as even as possible. I will be using fully built clubs and not club connex to give everything the fairest chance.
    this will be broken down into 2 categories. Wedge and Iron. And of course this is subjective to me only, but if it performs I will give me honest opinion. Wedge will be first followed by irons incase we need to expand past the 7i for a better view
    for the wedge the Maltby (56*) will be going up against my gamer the Mizuno T20 the new TW MG2 and what some would consider the holy grail the Mirua tour wedge. All will be built with a modus 125 wedge shaft lie angle bent to 62* and loft at 56*. Length will be 35.5”. Grip will be the NDMC black on black and swing weight will be made to D5.
    wedge scoring
    1. Launch monitor performance including the wet wedge test. I will rent a trackman and hit enough balls to get a good data set. This is the most important factor for me since I play in Texas. (35%)
    2. Bunker performance. I will film shots and post a video. Volvik was kind enough to donate 3 boxes of the new S4 balls in multiple colors so we can track and see the results clearly. Workability proximity to the hole durability etc will be how this is scored. (25%)
    3. on course performance. I will head to a par 3 course that has a 105 yard hole. 3/4 56 with my gammer I can carry 115 with 13k in spin. Same deal as the bunker, but will also factor in s*** shipping ability. (25%)
    4. Ease of assembly. This is important because many people who purchase maltby build themselves. I have taken everything apart to the component level. When I bend them I want to see how long everything stays in place. I will take before and after measurements. I figure it will have about 500 balls on it so should be a good test. (10%)
    5. This will be the first scoring but the least weighted. It is shelf appeal. While this is not the purpose major OEM’s use this to get us to buy. Also wedges are speciality clubs IMO and I don’t care as much about the look of I did I would not have the T20 as my gammer since it’s ugly. (5%)
    Iron scoring
    This will be the same for the most part except the weighting will be a tad different. Specs will also be D3.5 playing at 37.25” lie angle of 61* loft will all be adjusted to 33* to standardize. Shaft will be the modus 120TX. Grip will be the either the Lamkin st-2 hybrid midsize or ts1 midsize since I will be out of the NDMC. Contestants will be the Maltby Ts1-forged vs my gamer the Mizuno mp20 MMC the honma tr20v srixon zx7 and maybe one more tbd. Stock carry at 34* loft is 186 yards. (My Mp20 mmc are -2 weak)
    1. Launch monitor. (25%) I don’t really care much about this with irons I just want to know carry & spin and shot grouping.
    2. bunker performance (anyone who knows my game knows I am a magnet for the fairway bunker). (Part of on course)
    3. On course performance. This will be the highest weighted category. The same par 3 course has a hole with a 190 yard pin in the middle which I would use a 7i they also have a hole with a 175 yard front pin which I would play a cut into also with a 7i. Will also hit a course and test approach shots and situations. (40%)
    4. Ease of assembly. (15%)
    5. Curb appeal. (20%) this is higher because of the overall cost of investment. It will also be the first category scored once I get all the heads in. This is also more important to me because the look has a lot to do with how you feel it might interact with the turf among other factors. 
     
    stay tuned first video comes this week!
  6. Like
    Manimal26 got a reaction from MattF in The Maltby Challenge - unofficial review   
    First thank you to @Popeye64 for hooking me up with a maltby 7i and a brand new wedge.
    please help me tag people who want to follow this that I am missing @Chip Strokes @dlow206 @Hotdocta @Popeye64
    This has been a long time coming, but because of covid it took a long time to get a few single modus 125 wedge shaft and a few single modus 120TX 7i shaft so the playing field is as even as possible. I will be using fully built clubs and not club connex to give everything the fairest chance.
    this will be broken down into 2 categories. Wedge and Iron. And of course this is subjective to me only, but if it performs I will give me honest opinion. Wedge will be first followed by irons incase we need to expand past the 7i for a better view
    for the wedge the Maltby (56*) will be going up against my gamer the Mizuno T20 the new TW MG2 and what some would consider the holy grail the Mirua tour wedge. All will be built with a modus 125 wedge shaft lie angle bent to 62* and loft at 56*. Length will be 35.5”. Grip will be the NDMC black on black and swing weight will be made to D5.
    wedge scoring
    1. Launch monitor performance including the wet wedge test. I will rent a trackman and hit enough balls to get a good data set. This is the most important factor for me since I play in Texas. (35%)
    2. Bunker performance. I will film shots and post a video. Volvik was kind enough to donate 3 boxes of the new S4 balls in multiple colors so we can track and see the results clearly. Workability proximity to the hole durability etc will be how this is scored. (25%)
    3. on course performance. I will head to a par 3 course that has a 105 yard hole. 3/4 56 with my gammer I can carry 115 with 13k in spin. Same deal as the bunker, but will also factor in s*** shipping ability. (25%)
    4. Ease of assembly. This is important because many people who purchase maltby build themselves. I have taken everything apart to the component level. When I bend them I want to see how long everything stays in place. I will take before and after measurements. I figure it will have about 500 balls on it so should be a good test. (10%)
    5. This will be the first scoring but the least weighted. It is shelf appeal. While this is not the purpose major OEM’s use this to get us to buy. Also wedges are speciality clubs IMO and I don’t care as much about the look of I did I would not have the T20 as my gammer since it’s ugly. (5%)
    Iron scoring
    This will be the same for the most part except the weighting will be a tad different. Specs will also be D3.5 playing at 37.25” lie angle of 61* loft will all be adjusted to 33* to standardize. Shaft will be the modus 120TX. Grip will be the either the Lamkin st-2 hybrid midsize or ts1 midsize since I will be out of the NDMC. Contestants will be the Maltby Ts1-forged vs my gamer the Mizuno mp20 MMC the honma tr20v srixon zx7 and maybe one more tbd. Stock carry at 34* loft is 186 yards. (My Mp20 mmc are -2 weak)
    1. Launch monitor. (25%) I don’t really care much about this with irons I just want to know carry & spin and shot grouping.
    2. bunker performance (anyone who knows my game knows I am a magnet for the fairway bunker). (Part of on course)
    3. On course performance. This will be the highest weighted category. The same par 3 course has a hole with a 190 yard pin in the middle which I would use a 7i they also have a hole with a 175 yard front pin which I would play a cut into also with a 7i. Will also hit a course and test approach shots and situations. (40%)
    4. Ease of assembly. (15%)
    5. Curb appeal. (20%) this is higher because of the overall cost of investment. It will also be the first category scored once I get all the heads in. This is also more important to me because the look has a lot to do with how you feel it might interact with the turf among other factors. 
     
    stay tuned first video comes this week!
  7. Like
    Manimal26 got a reaction from tommc23 in The Maltby Challenge - unofficial review   
    First thank you to @Popeye64 for hooking me up with a maltby 7i and a brand new wedge.
    please help me tag people who want to follow this that I am missing @Chip Strokes @dlow206 @Hotdocta @Popeye64
    This has been a long time coming, but because of covid it took a long time to get a few single modus 125 wedge shaft and a few single modus 120TX 7i shaft so the playing field is as even as possible. I will be using fully built clubs and not club connex to give everything the fairest chance.
    this will be broken down into 2 categories. Wedge and Iron. And of course this is subjective to me only, but if it performs I will give me honest opinion. Wedge will be first followed by irons incase we need to expand past the 7i for a better view
    for the wedge the Maltby (56*) will be going up against my gamer the Mizuno T20 the new TW MG2 and what some would consider the holy grail the Mirua tour wedge. All will be built with a modus 125 wedge shaft lie angle bent to 62* and loft at 56*. Length will be 35.5”. Grip will be the NDMC black on black and swing weight will be made to D5.
    wedge scoring
    1. Launch monitor performance including the wet wedge test. I will rent a trackman and hit enough balls to get a good data set. This is the most important factor for me since I play in Texas. (35%)
    2. Bunker performance. I will film shots and post a video. Volvik was kind enough to donate 3 boxes of the new S4 balls in multiple colors so we can track and see the results clearly. Workability proximity to the hole durability etc will be how this is scored. (25%)
    3. on course performance. I will head to a par 3 course that has a 105 yard hole. 3/4 56 with my gammer I can carry 115 with 13k in spin. Same deal as the bunker, but will also factor in s*** shipping ability. (25%)
    4. Ease of assembly. This is important because many people who purchase maltby build themselves. I have taken everything apart to the component level. When I bend them I want to see how long everything stays in place. I will take before and after measurements. I figure it will have about 500 balls on it so should be a good test. (10%)
    5. This will be the first scoring but the least weighted. It is shelf appeal. While this is not the purpose major OEM’s use this to get us to buy. Also wedges are speciality clubs IMO and I don’t care as much about the look of I did I would not have the T20 as my gammer since it’s ugly. (5%)
    Iron scoring
    This will be the same for the most part except the weighting will be a tad different. Specs will also be D3.5 playing at 37.25” lie angle of 61* loft will all be adjusted to 33* to standardize. Shaft will be the modus 120TX. Grip will be the either the Lamkin st-2 hybrid midsize or ts1 midsize since I will be out of the NDMC. Contestants will be the Maltby Ts1-forged vs my gamer the Mizuno mp20 MMC the honma tr20v srixon zx7 and maybe one more tbd. Stock carry at 34* loft is 186 yards. (My Mp20 mmc are -2 weak)
    1. Launch monitor. (25%) I don’t really care much about this with irons I just want to know carry & spin and shot grouping.
    2. bunker performance (anyone who knows my game knows I am a magnet for the fairway bunker). (Part of on course)
    3. On course performance. This will be the highest weighted category. The same par 3 course has a hole with a 190 yard pin in the middle which I would use a 7i they also have a hole with a 175 yard front pin which I would play a cut into also with a 7i. Will also hit a course and test approach shots and situations. (40%)
    4. Ease of assembly. (15%)
    5. Curb appeal. (20%) this is higher because of the overall cost of investment. It will also be the first category scored once I get all the heads in. This is also more important to me because the look has a lot to do with how you feel it might interact with the turf among other factors. 
     
    stay tuned first video comes this week!
  8. Hmmm
    Manimal26 got a reaction from RRD in The Maltby Challenge - unofficial review   
    First thank you to @Popeye64 for hooking me up with a maltby 7i and a brand new wedge.
    please help me tag people who want to follow this that I am missing @Chip Strokes @dlow206 @Hotdocta @Popeye64
    This has been a long time coming, but because of covid it took a long time to get a few single modus 125 wedge shaft and a few single modus 120TX 7i shaft so the playing field is as even as possible. I will be using fully built clubs and not club connex to give everything the fairest chance.
    this will be broken down into 2 categories. Wedge and Iron. And of course this is subjective to me only, but if it performs I will give me honest opinion. Wedge will be first followed by irons incase we need to expand past the 7i for a better view
    for the wedge the Maltby (56*) will be going up against my gamer the Mizuno T20 the new TW MG2 and what some would consider the holy grail the Mirua tour wedge. All will be built with a modus 125 wedge shaft lie angle bent to 62* and loft at 56*. Length will be 35.5”. Grip will be the NDMC black on black and swing weight will be made to D5.
    wedge scoring
    1. Launch monitor performance including the wet wedge test. I will rent a trackman and hit enough balls to get a good data set. This is the most important factor for me since I play in Texas. (35%)
    2. Bunker performance. I will film shots and post a video. Volvik was kind enough to donate 3 boxes of the new S4 balls in multiple colors so we can track and see the results clearly. Workability proximity to the hole durability etc will be how this is scored. (25%)
    3. on course performance. I will head to a par 3 course that has a 105 yard hole. 3/4 56 with my gammer I can carry 115 with 13k in spin. Same deal as the bunker, but will also factor in s*** shipping ability. (25%)
    4. Ease of assembly. This is important because many people who purchase maltby build themselves. I have taken everything apart to the component level. When I bend them I want to see how long everything stays in place. I will take before and after measurements. I figure it will have about 500 balls on it so should be a good test. (10%)
    5. This will be the first scoring but the least weighted. It is shelf appeal. While this is not the purpose major OEM’s use this to get us to buy. Also wedges are speciality clubs IMO and I don’t care as much about the look of I did I would not have the T20 as my gammer since it’s ugly. (5%)
    Iron scoring
    This will be the same for the most part except the weighting will be a tad different. Specs will also be D3.5 playing at 37.25” lie angle of 61* loft will all be adjusted to 33* to standardize. Shaft will be the modus 120TX. Grip will be the either the Lamkin st-2 hybrid midsize or ts1 midsize since I will be out of the NDMC. Contestants will be the Maltby Ts1-forged vs my gamer the Mizuno mp20 MMC the honma tr20v srixon zx7 and maybe one more tbd. Stock carry at 34* loft is 186 yards. (My Mp20 mmc are -2 weak)
    1. Launch monitor. (25%) I don’t really care much about this with irons I just want to know carry & spin and shot grouping.
    2. bunker performance (anyone who knows my game knows I am a magnet for the fairway bunker). (Part of on course)
    3. On course performance. This will be the highest weighted category. The same par 3 course has a hole with a 190 yard pin in the middle which I would use a 7i they also have a hole with a 175 yard front pin which I would play a cut into also with a 7i. Will also hit a course and test approach shots and situations. (40%)
    4. Ease of assembly. (15%)
    5. Curb appeal. (20%) this is higher because of the overall cost of investment. It will also be the first category scored once I get all the heads in. This is also more important to me because the look has a lot to do with how you feel it might interact with the turf among other factors. 
     
    stay tuned first video comes this week!
  9. Like
    Manimal26 got a reaction from cksurfdude in The Maltby Challenge - unofficial review   
    First thank you to @Popeye64 for hooking me up with a maltby 7i and a brand new wedge.
    please help me tag people who want to follow this that I am missing @Chip Strokes @dlow206 @Hotdocta @Popeye64
    This has been a long time coming, but because of covid it took a long time to get a few single modus 125 wedge shaft and a few single modus 120TX 7i shaft so the playing field is as even as possible. I will be using fully built clubs and not club connex to give everything the fairest chance.
    this will be broken down into 2 categories. Wedge and Iron. And of course this is subjective to me only, but if it performs I will give me honest opinion. Wedge will be first followed by irons incase we need to expand past the 7i for a better view
    for the wedge the Maltby (56*) will be going up against my gamer the Mizuno T20 the new TW MG2 and what some would consider the holy grail the Mirua tour wedge. All will be built with a modus 125 wedge shaft lie angle bent to 62* and loft at 56*. Length will be 35.5”. Grip will be the NDMC black on black and swing weight will be made to D5.
    wedge scoring
    1. Launch monitor performance including the wet wedge test. I will rent a trackman and hit enough balls to get a good data set. This is the most important factor for me since I play in Texas. (35%)
    2. Bunker performance. I will film shots and post a video. Volvik was kind enough to donate 3 boxes of the new S4 balls in multiple colors so we can track and see the results clearly. Workability proximity to the hole durability etc will be how this is scored. (25%)
    3. on course performance. I will head to a par 3 course that has a 105 yard hole. 3/4 56 with my gammer I can carry 115 with 13k in spin. Same deal as the bunker, but will also factor in s*** shipping ability. (25%)
    4. Ease of assembly. This is important because many people who purchase maltby build themselves. I have taken everything apart to the component level. When I bend them I want to see how long everything stays in place. I will take before and after measurements. I figure it will have about 500 balls on it so should be a good test. (10%)
    5. This will be the first scoring but the least weighted. It is shelf appeal. While this is not the purpose major OEM’s use this to get us to buy. Also wedges are speciality clubs IMO and I don’t care as much about the look of I did I would not have the T20 as my gammer since it’s ugly. (5%)
    Iron scoring
    This will be the same for the most part except the weighting will be a tad different. Specs will also be D3.5 playing at 37.25” lie angle of 61* loft will all be adjusted to 33* to standardize. Shaft will be the modus 120TX. Grip will be the either the Lamkin st-2 hybrid midsize or ts1 midsize since I will be out of the NDMC. Contestants will be the Maltby Ts1-forged vs my gamer the Mizuno mp20 MMC the honma tr20v srixon zx7 and maybe one more tbd. Stock carry at 34* loft is 186 yards. (My Mp20 mmc are -2 weak)
    1. Launch monitor. (25%) I don’t really care much about this with irons I just want to know carry & spin and shot grouping.
    2. bunker performance (anyone who knows my game knows I am a magnet for the fairway bunker). (Part of on course)
    3. On course performance. This will be the highest weighted category. The same par 3 course has a hole with a 190 yard pin in the middle which I would use a 7i they also have a hole with a 175 yard front pin which I would play a cut into also with a 7i. Will also hit a course and test approach shots and situations. (40%)
    4. Ease of assembly. (15%)
    5. Curb appeal. (20%) this is higher because of the overall cost of investment. It will also be the first category scored once I get all the heads in. This is also more important to me because the look has a lot to do with how you feel it might interact with the turf among other factors. 
     
    stay tuned first video comes this week!
  10. Like
    Manimal26 got a reaction from Nolan220 in The Maltby Challenge - unofficial review   
    First thank you to @Popeye64 for hooking me up with a maltby 7i and a brand new wedge.
    please help me tag people who want to follow this that I am missing @Chip Strokes @dlow206 @Hotdocta @Popeye64
    This has been a long time coming, but because of covid it took a long time to get a few single modus 125 wedge shaft and a few single modus 120TX 7i shaft so the playing field is as even as possible. I will be using fully built clubs and not club connex to give everything the fairest chance.
    this will be broken down into 2 categories. Wedge and Iron. And of course this is subjective to me only, but if it performs I will give me honest opinion. Wedge will be first followed by irons incase we need to expand past the 7i for a better view
    for the wedge the Maltby (56*) will be going up against my gamer the Mizuno T20 the new TW MG2 and what some would consider the holy grail the Mirua tour wedge. All will be built with a modus 125 wedge shaft lie angle bent to 62* and loft at 56*. Length will be 35.5”. Grip will be the NDMC black on black and swing weight will be made to D5.
    wedge scoring
    1. Launch monitor performance including the wet wedge test. I will rent a trackman and hit enough balls to get a good data set. This is the most important factor for me since I play in Texas. (35%)
    2. Bunker performance. I will film shots and post a video. Volvik was kind enough to donate 3 boxes of the new S4 balls in multiple colors so we can track and see the results clearly. Workability proximity to the hole durability etc will be how this is scored. (25%)
    3. on course performance. I will head to a par 3 course that has a 105 yard hole. 3/4 56 with my gammer I can carry 115 with 13k in spin. Same deal as the bunker, but will also factor in s*** shipping ability. (25%)
    4. Ease of assembly. This is important because many people who purchase maltby build themselves. I have taken everything apart to the component level. When I bend them I want to see how long everything stays in place. I will take before and after measurements. I figure it will have about 500 balls on it so should be a good test. (10%)
    5. This will be the first scoring but the least weighted. It is shelf appeal. While this is not the purpose major OEM’s use this to get us to buy. Also wedges are speciality clubs IMO and I don’t care as much about the look of I did I would not have the T20 as my gammer since it’s ugly. (5%)
    Iron scoring
    This will be the same for the most part except the weighting will be a tad different. Specs will also be D3.5 playing at 37.25” lie angle of 61* loft will all be adjusted to 33* to standardize. Shaft will be the modus 120TX. Grip will be the either the Lamkin st-2 hybrid midsize or ts1 midsize since I will be out of the NDMC. Contestants will be the Maltby Ts1-forged vs my gamer the Mizuno mp20 MMC the honma tr20v srixon zx7 and maybe one more tbd. Stock carry at 34* loft is 186 yards. (My Mp20 mmc are -2 weak)
    1. Launch monitor. (25%) I don’t really care much about this with irons I just want to know carry & spin and shot grouping.
    2. bunker performance (anyone who knows my game knows I am a magnet for the fairway bunker). (Part of on course)
    3. On course performance. This will be the highest weighted category. The same par 3 course has a hole with a 190 yard pin in the middle which I would use a 7i they also have a hole with a 175 yard front pin which I would play a cut into also with a 7i. Will also hit a course and test approach shots and situations. (40%)
    4. Ease of assembly. (15%)
    5. Curb appeal. (20%) this is higher because of the overall cost of investment. It will also be the first category scored once I get all the heads in. This is also more important to me because the look has a lot to do with how you feel it might interact with the turf among other factors. 
     
    stay tuned first video comes this week!
  11. Like
    Manimal26 got a reaction from Kenny B in The Maltby Challenge - unofficial review   
    First thank you to @Popeye64 for hooking me up with a maltby 7i and a brand new wedge.
    please help me tag people who want to follow this that I am missing @Chip Strokes @dlow206 @Hotdocta @Popeye64
    This has been a long time coming, but because of covid it took a long time to get a few single modus 125 wedge shaft and a few single modus 120TX 7i shaft so the playing field is as even as possible. I will be using fully built clubs and not club connex to give everything the fairest chance.
    this will be broken down into 2 categories. Wedge and Iron. And of course this is subjective to me only, but if it performs I will give me honest opinion. Wedge will be first followed by irons incase we need to expand past the 7i for a better view
    for the wedge the Maltby (56*) will be going up against my gamer the Mizuno T20 the new TW MG2 and what some would consider the holy grail the Mirua tour wedge. All will be built with a modus 125 wedge shaft lie angle bent to 62* and loft at 56*. Length will be 35.5”. Grip will be the NDMC black on black and swing weight will be made to D5.
    wedge scoring
    1. Launch monitor performance including the wet wedge test. I will rent a trackman and hit enough balls to get a good data set. This is the most important factor for me since I play in Texas. (35%)
    2. Bunker performance. I will film shots and post a video. Volvik was kind enough to donate 3 boxes of the new S4 balls in multiple colors so we can track and see the results clearly. Workability proximity to the hole durability etc will be how this is scored. (25%)
    3. on course performance. I will head to a par 3 course that has a 105 yard hole. 3/4 56 with my gammer I can carry 115 with 13k in spin. Same deal as the bunker, but will also factor in s*** shipping ability. (25%)
    4. Ease of assembly. This is important because many people who purchase maltby build themselves. I have taken everything apart to the component level. When I bend them I want to see how long everything stays in place. I will take before and after measurements. I figure it will have about 500 balls on it so should be a good test. (10%)
    5. This will be the first scoring but the least weighted. It is shelf appeal. While this is not the purpose major OEM’s use this to get us to buy. Also wedges are speciality clubs IMO and I don’t care as much about the look of I did I would not have the T20 as my gammer since it’s ugly. (5%)
    Iron scoring
    This will be the same for the most part except the weighting will be a tad different. Specs will also be D3.5 playing at 37.25” lie angle of 61* loft will all be adjusted to 33* to standardize. Shaft will be the modus 120TX. Grip will be the either the Lamkin st-2 hybrid midsize or ts1 midsize since I will be out of the NDMC. Contestants will be the Maltby Ts1-forged vs my gamer the Mizuno mp20 MMC the honma tr20v srixon zx7 and maybe one more tbd. Stock carry at 34* loft is 186 yards. (My Mp20 mmc are -2 weak)
    1. Launch monitor. (25%) I don’t really care much about this with irons I just want to know carry & spin and shot grouping.
    2. bunker performance (anyone who knows my game knows I am a magnet for the fairway bunker). (Part of on course)
    3. On course performance. This will be the highest weighted category. The same par 3 course has a hole with a 190 yard pin in the middle which I would use a 7i they also have a hole with a 175 yard front pin which I would play a cut into also with a 7i. Will also hit a course and test approach shots and situations. (40%)
    4. Ease of assembly. (15%)
    5. Curb appeal. (20%) this is higher because of the overall cost of investment. It will also be the first category scored once I get all the heads in. This is also more important to me because the look has a lot to do with how you feel it might interact with the turf among other factors. 
     
    stay tuned first video comes this week!
  12. Like
    Manimal26 got a reaction from ncwoz in The Maltby Challenge - unofficial review   
    First thank you to @Popeye64 for hooking me up with a maltby 7i and a brand new wedge.
    please help me tag people who want to follow this that I am missing @Chip Strokes @dlow206 @Hotdocta @Popeye64
    This has been a long time coming, but because of covid it took a long time to get a few single modus 125 wedge shaft and a few single modus 120TX 7i shaft so the playing field is as even as possible. I will be using fully built clubs and not club connex to give everything the fairest chance.
    this will be broken down into 2 categories. Wedge and Iron. And of course this is subjective to me only, but if it performs I will give me honest opinion. Wedge will be first followed by irons incase we need to expand past the 7i for a better view
    for the wedge the Maltby (56*) will be going up against my gamer the Mizuno T20 the new TW MG2 and what some would consider the holy grail the Mirua tour wedge. All will be built with a modus 125 wedge shaft lie angle bent to 62* and loft at 56*. Length will be 35.5”. Grip will be the NDMC black on black and swing weight will be made to D5.
    wedge scoring
    1. Launch monitor performance including the wet wedge test. I will rent a trackman and hit enough balls to get a good data set. This is the most important factor for me since I play in Texas. (35%)
    2. Bunker performance. I will film shots and post a video. Volvik was kind enough to donate 3 boxes of the new S4 balls in multiple colors so we can track and see the results clearly. Workability proximity to the hole durability etc will be how this is scored. (25%)
    3. on course performance. I will head to a par 3 course that has a 105 yard hole. 3/4 56 with my gammer I can carry 115 with 13k in spin. Same deal as the bunker, but will also factor in s*** shipping ability. (25%)
    4. Ease of assembly. This is important because many people who purchase maltby build themselves. I have taken everything apart to the component level. When I bend them I want to see how long everything stays in place. I will take before and after measurements. I figure it will have about 500 balls on it so should be a good test. (10%)
    5. This will be the first scoring but the least weighted. It is shelf appeal. While this is not the purpose major OEM’s use this to get us to buy. Also wedges are speciality clubs IMO and I don’t care as much about the look of I did I would not have the T20 as my gammer since it’s ugly. (5%)
    Iron scoring
    This will be the same for the most part except the weighting will be a tad different. Specs will also be D3.5 playing at 37.25” lie angle of 61* loft will all be adjusted to 33* to standardize. Shaft will be the modus 120TX. Grip will be the either the Lamkin st-2 hybrid midsize or ts1 midsize since I will be out of the NDMC. Contestants will be the Maltby Ts1-forged vs my gamer the Mizuno mp20 MMC the honma tr20v srixon zx7 and maybe one more tbd. Stock carry at 34* loft is 186 yards. (My Mp20 mmc are -2 weak)
    1. Launch monitor. (25%) I don’t really care much about this with irons I just want to know carry & spin and shot grouping.
    2. bunker performance (anyone who knows my game knows I am a magnet for the fairway bunker). (Part of on course)
    3. On course performance. This will be the highest weighted category. The same par 3 course has a hole with a 190 yard pin in the middle which I would use a 7i they also have a hole with a 175 yard front pin which I would play a cut into also with a 7i. Will also hit a course and test approach shots and situations. (40%)
    4. Ease of assembly. (15%)
    5. Curb appeal. (20%) this is higher because of the overall cost of investment. It will also be the first category scored once I get all the heads in. This is also more important to me because the look has a lot to do with how you feel it might interact with the turf among other factors. 
     
    stay tuned first video comes this week!
  13. Like
    Manimal26 got a reaction from Sparky14 in The Maltby Challenge - unofficial review   
    First thank you to @Popeye64 for hooking me up with a maltby 7i and a brand new wedge.
    please help me tag people who want to follow this that I am missing @Chip Strokes @dlow206 @Hotdocta @Popeye64
    This has been a long time coming, but because of covid it took a long time to get a few single modus 125 wedge shaft and a few single modus 120TX 7i shaft so the playing field is as even as possible. I will be using fully built clubs and not club connex to give everything the fairest chance.
    this will be broken down into 2 categories. Wedge and Iron. And of course this is subjective to me only, but if it performs I will give me honest opinion. Wedge will be first followed by irons incase we need to expand past the 7i for a better view
    for the wedge the Maltby (56*) will be going up against my gamer the Mizuno T20 the new TW MG2 and what some would consider the holy grail the Mirua tour wedge. All will be built with a modus 125 wedge shaft lie angle bent to 62* and loft at 56*. Length will be 35.5”. Grip will be the NDMC black on black and swing weight will be made to D5.
    wedge scoring
    1. Launch monitor performance including the wet wedge test. I will rent a trackman and hit enough balls to get a good data set. This is the most important factor for me since I play in Texas. (35%)
    2. Bunker performance. I will film shots and post a video. Volvik was kind enough to donate 3 boxes of the new S4 balls in multiple colors so we can track and see the results clearly. Workability proximity to the hole durability etc will be how this is scored. (25%)
    3. on course performance. I will head to a par 3 course that has a 105 yard hole. 3/4 56 with my gammer I can carry 115 with 13k in spin. Same deal as the bunker, but will also factor in s*** shipping ability. (25%)
    4. Ease of assembly. This is important because many people who purchase maltby build themselves. I have taken everything apart to the component level. When I bend them I want to see how long everything stays in place. I will take before and after measurements. I figure it will have about 500 balls on it so should be a good test. (10%)
    5. This will be the first scoring but the least weighted. It is shelf appeal. While this is not the purpose major OEM’s use this to get us to buy. Also wedges are speciality clubs IMO and I don’t care as much about the look of I did I would not have the T20 as my gammer since it’s ugly. (5%)
    Iron scoring
    This will be the same for the most part except the weighting will be a tad different. Specs will also be D3.5 playing at 37.25” lie angle of 61* loft will all be adjusted to 33* to standardize. Shaft will be the modus 120TX. Grip will be the either the Lamkin st-2 hybrid midsize or ts1 midsize since I will be out of the NDMC. Contestants will be the Maltby Ts1-forged vs my gamer the Mizuno mp20 MMC the honma tr20v srixon zx7 and maybe one more tbd. Stock carry at 34* loft is 186 yards. (My Mp20 mmc are -2 weak)
    1. Launch monitor. (25%) I don’t really care much about this with irons I just want to know carry & spin and shot grouping.
    2. bunker performance (anyone who knows my game knows I am a magnet for the fairway bunker). (Part of on course)
    3. On course performance. This will be the highest weighted category. The same par 3 course has a hole with a 190 yard pin in the middle which I would use a 7i they also have a hole with a 175 yard front pin which I would play a cut into also with a 7i. Will also hit a course and test approach shots and situations. (40%)
    4. Ease of assembly. (15%)
    5. Curb appeal. (20%) this is higher because of the overall cost of investment. It will also be the first category scored once I get all the heads in. This is also more important to me because the look has a lot to do with how you feel it might interact with the turf among other factors. 
     
    stay tuned first video comes this week!
  14. Like
    Manimal26 got a reaction from Shapotomous in The Maltby Challenge - unofficial review   
    First thank you to @Popeye64 for hooking me up with a maltby 7i and a brand new wedge.
    please help me tag people who want to follow this that I am missing @Chip Strokes @dlow206 @Hotdocta @Popeye64
    This has been a long time coming, but because of covid it took a long time to get a few single modus 125 wedge shaft and a few single modus 120TX 7i shaft so the playing field is as even as possible. I will be using fully built clubs and not club connex to give everything the fairest chance.
    this will be broken down into 2 categories. Wedge and Iron. And of course this is subjective to me only, but if it performs I will give me honest opinion. Wedge will be first followed by irons incase we need to expand past the 7i for a better view
    for the wedge the Maltby (56*) will be going up against my gamer the Mizuno T20 the new TW MG2 and what some would consider the holy grail the Mirua tour wedge. All will be built with a modus 125 wedge shaft lie angle bent to 62* and loft at 56*. Length will be 35.5”. Grip will be the NDMC black on black and swing weight will be made to D5.
    wedge scoring
    1. Launch monitor performance including the wet wedge test. I will rent a trackman and hit enough balls to get a good data set. This is the most important factor for me since I play in Texas. (35%)
    2. Bunker performance. I will film shots and post a video. Volvik was kind enough to donate 3 boxes of the new S4 balls in multiple colors so we can track and see the results clearly. Workability proximity to the hole durability etc will be how this is scored. (25%)
    3. on course performance. I will head to a par 3 course that has a 105 yard hole. 3/4 56 with my gammer I can carry 115 with 13k in spin. Same deal as the bunker, but will also factor in s*** shipping ability. (25%)
    4. Ease of assembly. This is important because many people who purchase maltby build themselves. I have taken everything apart to the component level. When I bend them I want to see how long everything stays in place. I will take before and after measurements. I figure it will have about 500 balls on it so should be a good test. (10%)
    5. This will be the first scoring but the least weighted. It is shelf appeal. While this is not the purpose major OEM’s use this to get us to buy. Also wedges are speciality clubs IMO and I don’t care as much about the look of I did I would not have the T20 as my gammer since it’s ugly. (5%)
    Iron scoring
    This will be the same for the most part except the weighting will be a tad different. Specs will also be D3.5 playing at 37.25” lie angle of 61* loft will all be adjusted to 33* to standardize. Shaft will be the modus 120TX. Grip will be the either the Lamkin st-2 hybrid midsize or ts1 midsize since I will be out of the NDMC. Contestants will be the Maltby Ts1-forged vs my gamer the Mizuno mp20 MMC the honma tr20v srixon zx7 and maybe one more tbd. Stock carry at 34* loft is 186 yards. (My Mp20 mmc are -2 weak)
    1. Launch monitor. (25%) I don’t really care much about this with irons I just want to know carry & spin and shot grouping.
    2. bunker performance (anyone who knows my game knows I am a magnet for the fairway bunker). (Part of on course)
    3. On course performance. This will be the highest weighted category. The same par 3 course has a hole with a 190 yard pin in the middle which I would use a 7i they also have a hole with a 175 yard front pin which I would play a cut into also with a 7i. Will also hit a course and test approach shots and situations. (40%)
    4. Ease of assembly. (15%)
    5. Curb appeal. (20%) this is higher because of the overall cost of investment. It will also be the first category scored once I get all the heads in. This is also more important to me because the look has a lot to do with how you feel it might interact with the turf among other factors. 
     
    stay tuned first video comes this week!
  15. Like
    Manimal26 got a reaction from edingc in The Maltby Challenge - unofficial review   
    First thank you to @Popeye64 for hooking me up with a maltby 7i and a brand new wedge.
    please help me tag people who want to follow this that I am missing @Chip Strokes @dlow206 @Hotdocta @Popeye64
    This has been a long time coming, but because of covid it took a long time to get a few single modus 125 wedge shaft and a few single modus 120TX 7i shaft so the playing field is as even as possible. I will be using fully built clubs and not club connex to give everything the fairest chance.
    this will be broken down into 2 categories. Wedge and Iron. And of course this is subjective to me only, but if it performs I will give me honest opinion. Wedge will be first followed by irons incase we need to expand past the 7i for a better view
    for the wedge the Maltby (56*) will be going up against my gamer the Mizuno T20 the new TW MG2 and what some would consider the holy grail the Mirua tour wedge. All will be built with a modus 125 wedge shaft lie angle bent to 62* and loft at 56*. Length will be 35.5”. Grip will be the NDMC black on black and swing weight will be made to D5.
    wedge scoring
    1. Launch monitor performance including the wet wedge test. I will rent a trackman and hit enough balls to get a good data set. This is the most important factor for me since I play in Texas. (35%)
    2. Bunker performance. I will film shots and post a video. Volvik was kind enough to donate 3 boxes of the new S4 balls in multiple colors so we can track and see the results clearly. Workability proximity to the hole durability etc will be how this is scored. (25%)
    3. on course performance. I will head to a par 3 course that has a 105 yard hole. 3/4 56 with my gammer I can carry 115 with 13k in spin. Same deal as the bunker, but will also factor in s*** shipping ability. (25%)
    4. Ease of assembly. This is important because many people who purchase maltby build themselves. I have taken everything apart to the component level. When I bend them I want to see how long everything stays in place. I will take before and after measurements. I figure it will have about 500 balls on it so should be a good test. (10%)
    5. This will be the first scoring but the least weighted. It is shelf appeal. While this is not the purpose major OEM’s use this to get us to buy. Also wedges are speciality clubs IMO and I don’t care as much about the look of I did I would not have the T20 as my gammer since it’s ugly. (5%)
    Iron scoring
    This will be the same for the most part except the weighting will be a tad different. Specs will also be D3.5 playing at 37.25” lie angle of 61* loft will all be adjusted to 33* to standardize. Shaft will be the modus 120TX. Grip will be the either the Lamkin st-2 hybrid midsize or ts1 midsize since I will be out of the NDMC. Contestants will be the Maltby Ts1-forged vs my gamer the Mizuno mp20 MMC the honma tr20v srixon zx7 and maybe one more tbd. Stock carry at 34* loft is 186 yards. (My Mp20 mmc are -2 weak)
    1. Launch monitor. (25%) I don’t really care much about this with irons I just want to know carry & spin and shot grouping.
    2. bunker performance (anyone who knows my game knows I am a magnet for the fairway bunker). (Part of on course)
    3. On course performance. This will be the highest weighted category. The same par 3 course has a hole with a 190 yard pin in the middle which I would use a 7i they also have a hole with a 175 yard front pin which I would play a cut into also with a 7i. Will also hit a course and test approach shots and situations. (40%)
    4. Ease of assembly. (15%)
    5. Curb appeal. (20%) this is higher because of the overall cost of investment. It will also be the first category scored once I get all the heads in. This is also more important to me because the look has a lot to do with how you feel it might interact with the turf among other factors. 
     
    stay tuned first video comes this week!
  16. Like
    Manimal26 got a reaction from Kansas King in The Maltby Challenge - unofficial review   
    First thank you to @Popeye64 for hooking me up with a maltby 7i and a brand new wedge.
    please help me tag people who want to follow this that I am missing @Chip Strokes @dlow206 @Hotdocta @Popeye64
    This has been a long time coming, but because of covid it took a long time to get a few single modus 125 wedge shaft and a few single modus 120TX 7i shaft so the playing field is as even as possible. I will be using fully built clubs and not club connex to give everything the fairest chance.
    this will be broken down into 2 categories. Wedge and Iron. And of course this is subjective to me only, but if it performs I will give me honest opinion. Wedge will be first followed by irons incase we need to expand past the 7i for a better view
    for the wedge the Maltby (56*) will be going up against my gamer the Mizuno T20 the new TW MG2 and what some would consider the holy grail the Mirua tour wedge. All will be built with a modus 125 wedge shaft lie angle bent to 62* and loft at 56*. Length will be 35.5”. Grip will be the NDMC black on black and swing weight will be made to D5.
    wedge scoring
    1. Launch monitor performance including the wet wedge test. I will rent a trackman and hit enough balls to get a good data set. This is the most important factor for me since I play in Texas. (35%)
    2. Bunker performance. I will film shots and post a video. Volvik was kind enough to donate 3 boxes of the new S4 balls in multiple colors so we can track and see the results clearly. Workability proximity to the hole durability etc will be how this is scored. (25%)
    3. on course performance. I will head to a par 3 course that has a 105 yard hole. 3/4 56 with my gammer I can carry 115 with 13k in spin. Same deal as the bunker, but will also factor in s*** shipping ability. (25%)
    4. Ease of assembly. This is important because many people who purchase maltby build themselves. I have taken everything apart to the component level. When I bend them I want to see how long everything stays in place. I will take before and after measurements. I figure it will have about 500 balls on it so should be a good test. (10%)
    5. This will be the first scoring but the least weighted. It is shelf appeal. While this is not the purpose major OEM’s use this to get us to buy. Also wedges are speciality clubs IMO and I don’t care as much about the look of I did I would not have the T20 as my gammer since it’s ugly. (5%)
    Iron scoring
    This will be the same for the most part except the weighting will be a tad different. Specs will also be D3.5 playing at 37.25” lie angle of 61* loft will all be adjusted to 33* to standardize. Shaft will be the modus 120TX. Grip will be the either the Lamkin st-2 hybrid midsize or ts1 midsize since I will be out of the NDMC. Contestants will be the Maltby Ts1-forged vs my gamer the Mizuno mp20 MMC the honma tr20v srixon zx7 and maybe one more tbd. Stock carry at 34* loft is 186 yards. (My Mp20 mmc are -2 weak)
    1. Launch monitor. (25%) I don’t really care much about this with irons I just want to know carry & spin and shot grouping.
    2. bunker performance (anyone who knows my game knows I am a magnet for the fairway bunker). (Part of on course)
    3. On course performance. This will be the highest weighted category. The same par 3 course has a hole with a 190 yard pin in the middle which I would use a 7i they also have a hole with a 175 yard front pin which I would play a cut into also with a 7i. Will also hit a course and test approach shots and situations. (40%)
    4. Ease of assembly. (15%)
    5. Curb appeal. (20%) this is higher because of the overall cost of investment. It will also be the first category scored once I get all the heads in. This is also more important to me because the look has a lot to do with how you feel it might interact with the turf among other factors. 
     
    stay tuned first video comes this week!
  17. Like
    Manimal26 got a reaction from JohnSmalls in The Maltby Challenge - unofficial review   
    First thank you to @Popeye64 for hooking me up with a maltby 7i and a brand new wedge.
    please help me tag people who want to follow this that I am missing @Chip Strokes @dlow206 @Hotdocta @Popeye64
    This has been a long time coming, but because of covid it took a long time to get a few single modus 125 wedge shaft and a few single modus 120TX 7i shaft so the playing field is as even as possible. I will be using fully built clubs and not club connex to give everything the fairest chance.
    this will be broken down into 2 categories. Wedge and Iron. And of course this is subjective to me only, but if it performs I will give me honest opinion. Wedge will be first followed by irons incase we need to expand past the 7i for a better view
    for the wedge the Maltby (56*) will be going up against my gamer the Mizuno T20 the new TW MG2 and what some would consider the holy grail the Mirua tour wedge. All will be built with a modus 125 wedge shaft lie angle bent to 62* and loft at 56*. Length will be 35.5”. Grip will be the NDMC black on black and swing weight will be made to D5.
    wedge scoring
    1. Launch monitor performance including the wet wedge test. I will rent a trackman and hit enough balls to get a good data set. This is the most important factor for me since I play in Texas. (35%)
    2. Bunker performance. I will film shots and post a video. Volvik was kind enough to donate 3 boxes of the new S4 balls in multiple colors so we can track and see the results clearly. Workability proximity to the hole durability etc will be how this is scored. (25%)
    3. on course performance. I will head to a par 3 course that has a 105 yard hole. 3/4 56 with my gammer I can carry 115 with 13k in spin. Same deal as the bunker, but will also factor in s*** shipping ability. (25%)
    4. Ease of assembly. This is important because many people who purchase maltby build themselves. I have taken everything apart to the component level. When I bend them I want to see how long everything stays in place. I will take before and after measurements. I figure it will have about 500 balls on it so should be a good test. (10%)
    5. This will be the first scoring but the least weighted. It is shelf appeal. While this is not the purpose major OEM’s use this to get us to buy. Also wedges are speciality clubs IMO and I don’t care as much about the look of I did I would not have the T20 as my gammer since it’s ugly. (5%)
    Iron scoring
    This will be the same for the most part except the weighting will be a tad different. Specs will also be D3.5 playing at 37.25” lie angle of 61* loft will all be adjusted to 33* to standardize. Shaft will be the modus 120TX. Grip will be the either the Lamkin st-2 hybrid midsize or ts1 midsize since I will be out of the NDMC. Contestants will be the Maltby Ts1-forged vs my gamer the Mizuno mp20 MMC the honma tr20v srixon zx7 and maybe one more tbd. Stock carry at 34* loft is 186 yards. (My Mp20 mmc are -2 weak)
    1. Launch monitor. (25%) I don’t really care much about this with irons I just want to know carry & spin and shot grouping.
    2. bunker performance (anyone who knows my game knows I am a magnet for the fairway bunker). (Part of on course)
    3. On course performance. This will be the highest weighted category. The same par 3 course has a hole with a 190 yard pin in the middle which I would use a 7i they also have a hole with a 175 yard front pin which I would play a cut into also with a 7i. Will also hit a course and test approach shots and situations. (40%)
    4. Ease of assembly. (15%)
    5. Curb appeal. (20%) this is higher because of the overall cost of investment. It will also be the first category scored once I get all the heads in. This is also more important to me because the look has a lot to do with how you feel it might interact with the turf among other factors. 
     
    stay tuned first video comes this week!
  18. Like
    Manimal26 got a reaction from Rchang in Maltby really upping their game...TS-1 Forged Hollow body Irons   
    Things are coming along will open a thread in the next few days
  19. Like
    Manimal26 got a reaction from Kansas King in Maltby really upping their game...TS-1 Forged Hollow body Irons   
    Things are coming along will open a thread in the next few days
  20. Like
    Manimal26 got a reaction from ncwoz in Maltby really upping their game...TS-1 Forged Hollow body Irons   
    Things are coming along will open a thread in the next few days
  21. Like
    Manimal26 got a reaction from azstu324 in Maltby really upping their game...TS-1 Forged Hollow body Irons   
    Things are coming along will open a thread in the next few days
  22. Love
    Manimal26 got a reaction from Runrayrun in What is the WORST place to get a fitting? Fitting HORROR Stories?   
    If you did not know all fitters were not created equal, but at the same time don’t get my response of why I would wanted to talk with one on one you miss the point of fitting. The goal of getting a fitting is to improve your game and your game alone. At that point I was willing to share my knowledge and while I will never claim to be an expert I do have some key insights and true horror stories that some people may take offense too because it happened to them.
    At this point you would be better served going to bed earlier instead of typing messages in a forum at 1am my time. that way you could get up early and make an impact in your life and stop making excuses and throwing a pity party. The only reason you don’t have the things you want and you’re not where you want to be is because you’re not willing to make the sacrifice.
  23. Like
    Manimal26 got a reaction from GolfSpy_SHARK in Need new driver!!   
    Welcome! Some more details would be helpful. Such as shaft flex length budget etc. for example I have a tour issue epic flash head 9.0 deg hot melt 5g in the back of the head to help with launch going for around $400 I am asking $350 shipped to your door...
  24. Like
    Manimal26 got a reaction from Vegan_Golfer_PNW in 2021 Fantasy Golf   
    I have no clue on this but count me in! @STUDque maybe we can make a trade happen this time if you can do that!
  25. Like
    Manimal26 got a reaction from daviddvm in 2021 Fantasy Golf   
    I have no clue on this but count me in! @STUDque maybe we can make a trade happen this time if you can do that!
×
×
  • Create New...