benihana
-
Posts
20 -
Joined
-
Last visited
Content Type
Profiles
Forums
Articles
FAQ
Tests
Classifieds
Store
Group Buys
Posts posted by benihana
-
-
Please close
-
-
Prices include shipping to CONUS and PP G&S. Willing to ship outside CONUS but terms need to be discussed prior to sale. Everything is extremely clean, but please see pics for condition. PM for bundled offers, as shipping cost and convenience are both valuable to me.
1)
Mavrik SubZero 3-Wood with Rogue 80X shaft. Stock Callaway specs, CPO purchase from Callaway Pre-Owned. Hoped shaft would suit me, and it took about 10 balls to know that wasn't the case. Asking $SOLD incudes Callaway Mavrik headcover (never used)2)
Cleveland TFI 6.5 Mid-Mallet Putter. Face-balanced, stock specs except grip was recently replaced. Grip shows a bit of wear at top and bottom but I use a carry bag and it took almost no time to rub a bit despite being practically new. Including Kiawah headcover shown along with Cleveland putter cover (never used) at asking price. $SOLD3) Vega Raw Wedge Heads. 50* and 58*. I picked these up here and had them built up and I just didn't like them in the real world as much as in theory. They're pretty cool and very unique. Asking $80 for the set, prefer not to split, and these are tough to comp out on pricing so I'm open. I also have some wedge shafts around that could be worked into a deal. KBS 610 120g in LW length and C-Taper Lite X in GW length. PM if interested.
4)
Handcrafted Evenflow Blue 100g 6.5X Hybrid Shaft with MCC +4 Standard Size and Titleist Hybrid Tip. Hair over 40" tip of adapter to grip butt. Asking $SOLD5)
Taylormade Spider Tour Black 35" Face-Balanced model with OEM headcover included. Very lightly used. This was my second favorite, so I got it and played a couple rounds and then my #1 choice came around. Please see pics. I placed a little bit of lead in the rear portion to sit flush with the body. I was going for that slightly farther back weight feel. I can leave it or remove it upon buyer request. Asking $SOLD6)
Tour Edge Exotics CBX119 16.5* Fairway Wood Head OnlyVery clean used condition. Most noticeable spot is a splash mark on the face that is nowhere near the top line but I'm pointing it out anyway. Asking $SOLD head only, and I do have the original Evenflow Blue 6.5X 75g shaft without grip. PM if interested. It was tipped about an inch after being pulled so it would play shorter and stiff than normal but it's available to somebody who is into that sort of thing.
Edited just now by bnperrone
-
is that the face-balanced model?
-
4 hours ago, wonko said:
hi there
just wondering if the Mizuno MP-H5 1 iron is still available and if so are you in USA ? as im in australia and no chance im paying nearly $500 for a single club but thought id find out ...if its AUD $ + includes postage then im in otherwise good luck with that
Sorry, thought I'd marked everything sold and locked this thread. That club is in a new home, but I can tell you that as cool as the "hitogami" is, there are better current options (at least I've found that to be the case). After I sold this my brother sent me a P790 UDI and I get more distance out of it and have greater flexibility to hit bullets or hit softer compared to the H5. I know he likes the PXG 0311 driving irons better than the UDI he sent me.
Best of luck finding an H5, but if I were you I'd look at the U500/510, Srixon UX, Callaway UT, TM line, and all the others that have come out more recently than the H5.
-
sent pm. I have one I could have pulled
-
On 2/11/2021 at 9:58 PM, twyatt700 said:
Haha, I thought it looked familiar!
Sent from my iPhone using MyGolfSpyFYI a 21* 818h2 just went up for sale over on WRX. Head only.
-
-
9 hours ago, twyatt700 said:
If this was a higher loft I’d be all over it!
Sent from my iPhone using MyGolfSpyCan still do shaft-only on the hybrid. And really, if you meant the 3W I would be willing to have that pulled for a shaft-only buyer. I'm just not doing it pre-emptively.
-
Two items for sale:
First, I am selling a very clean and only lightly used Titleist 818h2 19* with Project X Evenflow Blue 85g 6.0S shaft. The shaft itself measures 40" from adapter tip to grip butt. I never played this shaft but research suggests it is a straight-in stock factory build. I don't have a 60* angle measure but that should make it 40.5" stock playing length. Original headcover not included but will be fully protected in shipping.Can include 14g neutral, 14g fade/draw, and 16g fade/draw weights.Small paint chip on crown (not at topline) and small paint chip on shaft as shown in close-up pics.EDIT: Message for shaft only or head only.Asking$SOLD complete club Paypal G&S including CONUS shipping. If outside of CONUS just let me know and I'll be happy to send it if buyer covers excess shipping expenses.Second, I have an X2 Hot Pro 3-Wood that I had reshafted with an Evenflow Black Handcrafted 75g shaft. It is a 6.0 flex but the builder did extra tipping to get it closer to X. For flex reference, it flexes at 277 cpm on the shop scale, and at the time of the build, a GBB Epic with Whiteboard X at the same playing length and total weight flexed at 278cpm. Playing length is 42.25" and swingweight with lead tape as shown is currently D3. These clubs are known to be very hot, have great feel, and flat lie angles. I'm moving to a heavier shaft class and it just doesn't make economical sense to take it apart and try to sell as components. Will be shipped with Callaway generic headcover.
EDIT: I'm willing to have the shaft professionally pulled. Bear in mind that 42.25" playing length in a bonded head is likely to be 42.75" or a little more when an adapter is used. Message if interested.
Tough item to price as I cannot find one for sale in as good condition with this quality shaft and build.
Asking $120complete club same PP and CONUS shipping notes as above item.
-
26 minutes ago, twyatt700 said:
I'm interesting in the Evenflow White. What deal would you give if I went with both the blue and the white? Also would this work with a 818 model hybrid?
Just sent you a reply via private message. Thanks!
-
Welp, did it again experimenting with figuring out a specific hybrid setup, and it didn't make sense to start tweaking lengths and whatnot with an obvious bad fit. At least I'm keeping the head I bought. All prices are OBO PayPal G&S and shipped to CONUS. I use USPS but I am happy to ship with another provider if buyer pays any excess shipping cost. Given absurdity of shipping, I'd really like to bundle some or all of these and I'd be very flexible on an offer for the entire lot. Only possible trade I can think of is a standard (A) head weight MP20 PW head, a Wilson Staff Model 50* gap wedge head, or an 0311X 1-iron head, and I'd only be interested in very good condition or better.
All have Titleist Hybrid Adapter Installed
1: KBS Tour Prototype Graphite Hybrid Shaft 105X. Measures 40 1/8" from tip of adapter to butt of grip. Black and White MCC Standard grip. This is stout. If you aren't solidly in X territory I'd say save yourself the headache and skip it. $SOLDItem 2 back available
2: Project X Evenflow Blue 85g 6.0. Measures 40" from tip of adapter to butt of grip. Black and White MCC Standard grip. Minor chip and scratch shown in pics. Zero affect on playability. $50
3:
Project X Evenflow White 90g 6.0. Measures 39 3/8" from tip of adapter to butt of grip. Grey MCC +4 Standard Size grip.$SOLD4:
Tensei White 100X (not pro model, not TX). Measures 38 3/16" from tip of adapter to end of the ungripped shaft. $SOLD5:
913 hd 18* head available to add to either shaft for $30. Hard to price this but it's in much better condition than most this age, and IMO this line is superior to everything that came after it until the 818 series. Red weight installed but we packed some lead tape into the cavity and the head weighs 230gWould love to move both shafts and the head in one transaction.
-
Sold
in Archived BST
Two sets went up on WRX very recently for far more than this. One was also opened. I don't have a dog in the fight here and I don't care about limited availability high-end stuff, but he's clearly in line with the market on asking price. Regarding history on the site, it really doesn't matter in this case. If you're talking about hand-built stuff or tour-issue items where you'd really want to have some documented record, sure. This is sealed in plastic from the manufacturer. Any transaction will include multiple layers of buyer protection. There's really nothing that a 10,000 post count would change about the item or the market rate for it. Not to mention there's dozens of posts every week where headcovers and putter covers and ball markers go for (what I think is) stupid money and I don't see the people here trolling after them. Sounds like some folks are jealous their number didn't get called and others are mad that they can't stroke that check. I can't either, so it's a good thing I don't care.
-
Price includes Paypal payment and shipping to CONUS. Please message regarding shipping elsewhere. Happy to provide additional pics and info as needed. PP address is [email protected]
1.
Ping G410 LST Fairway Wood with Evenflow Black 85g 6.5X at stock 43" playing length with clean MCC+4 grip in gray standard size. This has very few swings on it and is in excellent condition. I tried to recreate the feel of my driver but it isn't for me. Given shipping rates these days and Ping's backorder status I'm asking $SOLD0 complete or $SOLD head only and $SOLD shaft only. Headcover will be included for whoever takes the clubhead.2.
SCOR wedges, 47*, 51*, 55* with C-Taper Stiff shafts. No shaft labels. Would prefer to sell as a set for shipping, and $SOLD is as low as I can go before I just keep them around for wearing out on the range. See pics for wear and note the rock chip on the 55* that unfortunately came on the third swing ever from a practice bunker.3. SCOR wedges 42*, 46*, nearly new with Project X LZ 6.0 shafts and MCC+4 grips, gray standard size. These were purchased as new old stock fitting heads, hence the discoloration around the top of the hosel. SCOR used a brass fitting attachment, so besides the discoloration there is no difference in weighting or construction compared to any other SCOR retail wedge. I built these to try and blend with a set of Mizuno MMCs but I moved on from those and got into C-Taper Lite X shafts in my current irons. $100 for the set.
-
As much as I'd like to keep all my clubs, it's time to move on. Some are simply replaced, some are experiments that didn't work out, and some aren't better than what they were meant to replace. I'm open to reasonable offers discounts for multiple items, and everything is priced shipped to lower 48 and PP. I'm willing to ship anywhere, but costs outside lower 48 need to be determined and added.
I'm open to trade for a Ping G410 5W, 3W, or 3W LST with Evenflow Black 85g 6.5X, ideally with stock build specs. Possibly G410 19* hybrid with same EFB 6.5X shaft.
1-3)
SM7 Jet Black Wedge Set. 50.12F, 54.10S, 58.098M. Matching serial number set, confirmed by Titleist to be factory Project X LZ 6.0 120g shaft install at 1/4" under playing length. These come without grips and currently have butt extensions to bring them back up a bit beyond standard length and I can pull them or leave them. Lofts set at 50, 55, 60 and flat lie angles. Bent to your specs upon request. $190 for the set, $140 for two, or $75 each.4)
Epic (NOT flash) Subzero 15" FW with Diamana D+ Whiteboard 70x. Purchased from Callaway CPO, very little use or wear. 42.245" playing length, GP grip, little lead on the toe that can stay or go. I could potentially add an OG flower band whiteboard 73X that would play more like 42.50". $115 as-is, PM regarding shaft combo.5)
Titleist 818h2 23* w/Evenflow White 90g 6.0 shaft ~1/2" below standard playing length. Again, very little wear at all. I thought I wanted to replace the 4-iron slot and it doesn't suit me. Shaft was OEM titleist from TS3. I also have a KBS steel hybrid shaft and adapter available. $125 with Evenflow, PM for head or shaft only offers.6)
Mizuno combo iron set, MP60 4-7, MP32 8-PW. I am the original owner, and these were ordered 1/2" over length (b heads) with Royal Precision Rifle Flighted 6.0 shafts. My spec is standard loft and about 1* flat, recently checked and adjusted. The 8, 9, and PW faces are shown in close-ups and have the most wear. 4-iron shown has the least. I take very good care of my equipment and over the last couple years I used a different PW. Serviceable grips. I find it very difficult to capture condition in pictures, so I'm happy to send more upon request. $180 mainly because they're much cleaner than what I find out there.7-9)
SCOR Wedge Set. 47, 51, 55. These were reshafted after a fitting and I was in a phase where I didn't like labels. They're C-tapers, most likely 120S or 125S+. They slot in with the 6.0 Rifles of the MP set. They match the 1/2" over specs of the MP set for length, and they have the same decent grips as above. Ideal setup for somebody looking to play their wedges like irons with a lower ball flight and moderate spin. The 55* unfortunately caught a pebble in a bunker on the third swing I made with it ever. See pic, hasn't impacted playability but it is a shame to look at. $100 for the set, would prefer to sell as a set.10) Last but not least, the Mizuno MP-H5 "Hitogami" 1-iron. I was fitted for this and didn't want shaft labels, so I'm unsure which C-Taper is in it. What I can tell you is that it is 40" length, D1 as assembled with extra wraps under an MCC +4 grip, and frequencies at 294 with a total weight of 398g. I play everything in the S+ to X range and this slots right in there. I like this club, but it's hard to find a spot in my bag for it. My price on this is high but it's considerably less than the only one I found on Ebay. It's what it'll take for me to get rid of it. $300.
-
I have a set of SM7 Jet Black Vokeys that are easily bent to those lofts and would be high bounce like you want. Actually, the 54 is already bent to 55 and the 58 is bent to 60. As ordered, they are 50.12F, 54.10S, 58.8M all with project X LZ 6.0 shafts at 1/4" short of standard. If you don't have access to a reliable shop for bending I could have it done.
-
I've got an 818h2 with a 90-gram evenflow white 6.0 shaft in excellent condition. Shaft was originally ordered for a TS hybrid and I purchased it from Will Peoples golf. I thought I wanted to replace my 4-iron but in real life it isn't working that way. Feel free to PM me about it if he's interested.
-
Paypal fees and CONUS shipping included. I'm willing to ship anywhere but I'd need to quantify the cost to ship outside of CONUS. Please inquire about discounts for multiple items, particularly for shipping shafts. I'm also happy to provide additional pics or measurements as requested. I am new to this forum and don't sell online often, but my Ebay ID is benphsc if you want to check feedback. Open to offers but not trades unless somebody has some nearly new JPX919 Tours or Mp's with C-Taper Lite X or Project X LZ 6.0 shafts.
-
TaylorMade M5 9.0* Driver w/ Black Hzrdus 75 6.0 at 45" playing length (44" adapter tip to grip butt). MCC +4 Std Grip. Head ordered new from TM, swapped in shaft from my brother's new M5 order from TM, played a couple rounds and a couple range sessions. $275 -
Black Evenflow Handcrafted 75g 6.0 Driver shaft with Z cord grip with TM tip, plays at 45.5" in M5 (44.5" tip to grip). Ordered new from True Temper. $150 -
MRC Diamana D+ 62 x5ct Stiff Driver Shaft with MCC +4 Align midsize grip. Has TM adapter installed, plays at 45.5" in M5 (44.5" tip to grip), acquired on trade. $50 Inquire about pricing for various heads and shafts. Original headcover will go to whoever buys the head. $425 to bundle head and all 3 TM shafts. -
Ping G LS Tec 9.0 Driver. Bought used from local top-100 clubfitter shop. Comes with Ping Tour 65 X shaft at stock 45.25" playing length (44.25" tip to grip). MCC Align Std grip. Light scratch from alignment stick shown in last pic of head taken by window. Far less noticeable in person but I did my best to show it at its worst. $SOLD -
Evenflow White 65g 6.0 Driver Shaft, 45.5" playing length in G head (44.5" tip to grip), z-cord midsize grip. Bought new from Titleist factory order with Titleist tip and I had the Ping tip installed. Scrape on back side of shaft by ferrule as shown in picture. No touch-up attempted to make it blend in. $SOLD G head and both shafts for $SOLD, headcover included for whoever purchases head -
Aldila Tour Green ATX Fairway Wood Shaft, 75g 3.7 Stiff. Pulled from Callaway X2 Hot Pro 15*, only hit a couple times before pulling. Played stock 43" length. No adapter as it was pulled from a fixed head. 42" raw tip to grip. MCC Align Mid grip. $45
-
MRC Diamana D+ 102 Hybrid Stiff. Pulled from Titleist 913H2 18* hybrid. No adapter. 38.5" raw tip to butt. Tour Wrap mid grip. $40
-
Titleist 4UP Sta-Dry Stand Bag, Ocean Course at Kiawah embroidery on ball pocket. Embroidery is backed with waterproofing on the interior. New in plastic and box, 2016 model, ordered new from Titleist (I am a Kiawah employee). Comes with double strap and single strap as well as waterproof top cover. These are very light and balance well but I just don't need a backup bag and it's been in the box in a closet long enough. $175
-
-
I have 2 pairs of nearly new Ecco Cage 2 Pro shoes and 1 pair of hybrids. All size 43. See pictures for condition. The cage pro 2s would pass for brand new. All of them bite my heel so I'm giving up. Pricing includes shipping to CONUS and Paypal. If you're outside of CONUS just let me know so we can work out a fair shipping price.
1.White and red hybrids (original generation of hybrid). Worn a few times and forgotten about in a closet. $50
2. White Leather Cage Pro 2 Lace-ups. Worn once. $1103. Gray Leather Cage Pro 2 Boa with GoreTex. Worn Twice. $130
Mizuno, Callaway, SCOR, GOSTs, Srixon, etc.
in Archived BST
Posted
Prices include PP G&S and shipping within lower 48. I'll ship anywhere but need to quantify expenses outside of CONUS. Reasonable offers considered, especially for bundling items. Condition shown in pictures, please message with any questions. Dark spots on iron faces from camera shadow. Everything is used but very good condition or better, soft forged clubs have expected bag chatter and some evidence of loft and lie tweaking from machine. Great clubs for a serious golfer, but not wall art.
Trades include Theragun Mini, Ventus Velocore Blue 8X or 9X hybrid shafts depending on length/tipping, and that's about it. Would consider trading the MP20 MMC / SCOR iron set for something comparable in the players/player's cavity category with Modus 105X shafts, but I would rather have money than a backup set.
GOST shafts were previously listed as complete clubs, so now pulled with adapters removed I believe I am permitted to re-list them since they are entirely different now.
1. GOST X Flex .370 with red/black MCC grip. This measures 38.5" from tip to grip butt and was previously installed in a ZX 3 utility. For reference it played about 39.25" in that head without tip weights $150
2. GOST Tour S Flex .370 no adapter or grip. Measures 39.5" tip to tip and for reference it was about 41" playing length with a PXG adapter and hybrid head. $150
3. Srixon ZX Utility 3-iron w/ Modus 105X and gray MCC+4 grip. 39" playing length. Shaft was purchased new and professionally installed, but it just didn't work out like I'd hoped. Keeping my ZX 2 utility instead. $180
4. Callaway X2 Hot Pro 4-wood 17* with Evenflow Black 85g 6.5X and gray MCC+4 grip. Playing length 42.5". Hard to find a cleaner one than this. I just can't figure out the fairway wood setup for me and I'm onto a low lofted hybrid. $150
5. SCOR 42* with Project X LZ and TV grip at standard 9-iron playing length. Ideal as a practice club or to blend a set. $50 would strongly prefer to bundle this with something else due to shipping costs.
6. MP20 MMC / SCOR iron set 4-PW plus Gap Wedge head and shaft options. 4-9 are MP20 MMC, PW is 46* SCOR wedge, and all are shafted with C-Taper Lite X shafts purchased new and professionally installed. MCC grips, 4-iron has MCC+4. Built to standard length and lie, with 4* loft gaps from 22* 4-iron down to 46* PW. GW head is 49* SCOR bent to 50* and I can include another C-Taper Lite X shaft and/or KBS 610 120g shaft, either of which would sync up for set progression. I got bored and played around with lead tape to get swingweights absolutely consistent. I can remove tape or ship as-is and let buyer decide **Condition note on all SCOR heads - These were purchased as new old stock from a fitting set. The discoloration around the hosel is due to the fitting connector SCOR used. The heads are otherwise identical production units, so only cosmetic difference.** $700 for entire set with both gap wedge shaft options listed. PM if you want it but don't have access to a shop to have gap wedge built back up.
7. PXG RH hybrid adapter, OEM. $20