Search the Community
Showing results for tags 'Chipping'.
Hi, my name is Rich. I'm the creator and founder of NEXShot Golf. I'm about to launch my first product, NEXShot Pro on Kickstarter and wanted to get some feedback about the product before the launch. It's a Game-Improvement Chipping Game that I've spent the last 2 years developing and tweaking to get just right. Unlike other golf games on the market, the NEXShot Pro will tell you how your ball will land instead of just where it lands. It's designed to reject bad shots, promote good shots, and help improve shot displacement, distance control, and trajectory. The objective of the game is to land your ball on the 2 types of turf, or in the cup. If you miss the board, you get a bogey. You can play flop shots, bump and runs, and even practice adding spin to your shots. We're partnered with Swing Coach Club to utilize their Sci-Core practice ball which is the heaviest practice ball on the market. You can also play outdoors with real balls as well. If you have any questions, please feel free to ask. I welcome any comments/criticisms/feedback.
It feels like forever since the sun was last shining here in northern England and I was able to get out and hit some golfballs in the garden... although it was actually only 8 days ago! We're forecast some nice dry weather this weekend so I hope to get out there once again and teach myself some basics to improve my short game. Last week I tried a cricket-style shot, as suggested by my brother, where I decrease loft by keeping my hands in front of the club head and pushing through, popping the ball up off the ground and landing with little back spin. It is a delicate little shot, which worked well at a very short range, but I found I was digging the club into the turf. Any tips to avoid doing this? I think this shot could be used within close proximity to the green where there is little room for error...? Secondly I tried a more conventional chip where my hands are directly above the club head, totally square at the point on impact. I kept a shallow angle of attack and follow through, reducing the thins I usually hit. This worked better for longer range shots and stopped the ball dead due to increased backspin. I think this will become my default shot as it feels great lifting the ball into the aid and dropping it down so nicely. I enjoyed the control of this shot and figured out the placing the ball further forward/back determined how high the ball goes. Result! These shots are a real eye opener for me as I have never practiced chipping/pitching and just "go for it" during a round. I hope that by the time we get back onto the course I'll be able to put these into practice and see my scores reduce significantly. Ps. I hope you are all keeping safe and well, maintaining safe distances and doing everything possible to stay healthy.
An Unofficial Review of Cleveland RTX-3 Wedges Hey guys and gals, I am new to the forums, but wanted to contribute something because I think this is a pretty neat community. I've replaced almost every club in my bag this season (and my bag, come to think of it), but the most notable improvement I've seen simply due to a club upgrade has come from my set of Cleveland RTX-3 Wedges. I purchased a 50Â°, 54Â°, and a 58Â°, all in the â€œTour Rawâ€ finish and the V-MG grind, on June 6th to replace my random assortment of wedges, the 50Â° from my iron set (Taylormade Burner â€˜09s), a 55Â° from a set of Taylormade RBZ irons, and a 60Â° Cleveland RTX 2.0 that I bought on a whim when Sports Authority was in its death rattle. I hit Cleveland RTX-3s, Vokeys, and Ping Glide wedges at the PGA Tour Superstore in Sandy, UT and just loved the look and feel of the Clevelands, so I pulled the trigger. I paid the standard retail price of $129.99 per club + tax. I was having trouble with consistency with my original setup, probably due to my swing, but also the feel of each of the three wedges was very different. The 5Â° gaps were wide as well. I decided to shrink the gaps by 1Â° and get rid of the 60Â°. It was simply too much loft for me, and I wasn't hitting it how I wanted to. The first time I hit the RTX 3.0 set was one evening at work when I was waiting for the last carts to come in (perks of working at the course!). It sounds a bit ridiculous, but I holed out my first shot from about 75 yards with the 54Â°. I was sold! I definitely didn't hole out my next 100 or so shots, but I noticed a marked improvement in my pitching game almost immediately. I used them to chip that evening as well, and I was happy with the performance, considering my chipping was poor at best with my old set. If I struck them well, I could get the ball to check quite a bit, even with range balls when before I don't think I ever got a ball to check noticeably at all. Since I purchased these wedges, I've shot the best 3 rounds of my short golf life (1 year), with an 86, 85, and 84. Also, my putting numbers have gone down, which I think has a lot to do with the fact that I'm able to miss greens, but put myself in a position to 1 putt. I've had more 1 putts in the past few weeks than I've ever had. It's important to keep in mind that I also have been playing A LOT (5-6 rounds per week), and am getting more comfortable on the course every day. I was a little nervous about hitting these clubs out of the sand, as I was a solid bunker player with my old, wide-soled 55Â° SW. The first go with the 54Â° in a bunker was a badly bladed shot that ended up on the other side of the greenâ€¦. in another bunker. The second bunker shot with the 54Â° was great, though, and I put it about 4 feet from the pin, which is pretty good for me! I've continued the bunker success since that first round and have had quite a few sand saves with these clubs. I believe I've had a sand save with each one at least once. Form factor is important to me, and I really like the look of these wedges. They look very nice behind the ball and the Tour Raw finish suits me. After playing a handful of rounds with these, the almost bronze finish is starting to wear off, exposing the raw metal beneath. Every round I love the look more. Rusty wedges seem to be a polarizing topic around these parts, and I fall on the side of loving the look of a well-used, trusty rusty. On the head plastic when I purchased these, it said â€œdesigned to rustâ€. The grooves have an appealing look to me as well, and the milling is interesting and seems to perform well. The stock grip is a comfortable Lamkin (not sure which model) and the stock shaft is a Dynamic Gold Wedge shaft. As a mid to high-handicapper, the specifics of the weighting and other improvements that Cleveland showcases are hard to feel for me. All I know is, whatever Cleveland did is working out for me! I believe that Cleveland offers full customization of these wedges from their website, all the way down to paintfills. This is my first product review probably ever, so if there is anything I can do to improve it, if I'm breaking any forum rules, or I'm missing something, please let me know, and if you have any questions about the wedges, I'll try my best to answer them! Thanks for reading!
It's no secret I'm a big fan of the DST Compressor, as I've made apparent here and here. Oh and there's the original forum thread/version of the blog review. Just wanted to point out that my DST success hasn't been restricted to the range. This season I've suffered from a terrible short game, something I've always taken great pride in and have been somewhat know for round these parts. Well last weekend I took out the DST to the chipping green and it's really helped me get my hands back into a forward position that I had migrated away from in the off-season, After 2 hours spent just hitting shots from different situations I'm now back to getting the right check on chips when and where I need it. My last few rounds I've really struggled with my irons and this short game has kept my scores at some really respectable numbers. Anyways just dropping a tip for you guys looking for a training tool to really ingrain your chipping strokes.