Search the Community
Showing results for tags 'rbz stage 2'.
Found 2 results
Here's what's in my bag: Driver: Rocketballz RBZ Stage 2 9.5 degree Fujikura Rocketfuel 60 gram Stiff shaft 3-Wood: Roketballz RBZ Sage 2 Tour TS 13 degree Fujikura Rocketfuel 70 gram Stiff shaft Hybrid 4: Rocketballz Stage 2 4 hybrid 21 degree Fujikura Rocketfuel 65 gram Stiff shaft Iron: 2-iron Titleist DTR (Distance Through Research) (still in the bag - from 1990!) Irons: 3-PW Titleist AP2 718 (recently upgraded from AP2 710s) AMT White S300 shafts Wedges: Cleveland 588 Tour Action RTG 52, 56 and 60 degree Putter: Odyssey 2-Ball Fang with Superstroke 3.0 Slim Grip Alternate Putter: The Wilson 8802 (again, still in the bag - from 1990) I shuffle the 3-wood, hybrid and 2-iron and drop the 60 degree wedge when I need to carry 2. Just upgraded the irons, looking to upgrade the driver and 3/hybrid. Then I need to look into the wedges, maybe go to 50, 54, and 58 to fit better with the lofts on the new irons? Thanks, Mick
After breaking the shaft on my Taylormade RBZ stage 2 three wood I decided to try and replace it myself. I wanted to replace with a like for like shaft, the rocketfuel by Matrix so I looked up the specs and found that it should have a .350" tip so bought a Matrix rocketfuel shaft with 350 tip from Ebay. I used the hot air gun method to remove the existing shaft from the hosel but it did not come out cleanly. I carefully drilled out the remainder of the shaft and the inside of the hosel looked clean. Now here is my problem, the new shaft does not fit into the hosel so were the online specs correct that the RBZ stage 2 fairway woods have a 350 tip shaft? I'm a bit reticent about drilling the hosel out further but if I have to what should the internal diameter of the hosel be?