Search the Community
Showing results for tags 'shaft pulls'.
I've been trying to figure out a cheapish graphite shaft pulling setup for a while. I came across some videos on Youtube (here and here) by a guy who built one from a couple of vises. He's from the UK, so he says it cost less than &20. I picked up the vises for about $20 a pop at the hardware store. I cut out the aluminum cuff myself, but I'm going to get one from Golfworks here shortly, and had the torch and shaft vise collar already. It's a pretty simple design, and it works a charm, so I thought I'd share it in case anyone is interesting in making one themselves.
Selling a perfect set of 5-GW (7 total) Recoil F2 460 Series Iron Shafts .370 Parallel Tip professional pulled from a set of PXG 0311 irons. The F2 flex designation is Senior or "A" Flex. The grips are PXG branded Pure Pro grips and are almost brand new in condition. The 5 iron shaft measures 37.25" from grip cap to shaft tip. The Pure Grips have a grip cap that measures 1/4" so the graphite shaft will measure 37" without a grip. The 5 iron measured 38.25" when shafted. Each shaft decreases in length 1/2" (6 iron is 1/2" less than 5 iron shaft, etc). Specs