Jump to content
Testers Wanted! Toura Golf Irons Build Test! ×

First True Fitting Review


DanUsh

Recommended Posts

I had my first true fitting.  This may be different then what others have gone through for a fitting but I enjoyed my experience.  I live in South Jersey and there are not too many club fitters around here.  When deciding to get fit for new irons i wanted to make sure the fitter used Trackman so I looked around.  There was one fitter 5 minutes from my house who is a Golf Digest Top 100 fitter.  I have been in his shop a few times for different things and just knew our personalities didn't sync up to do a club fitting. I found another fitter about 80 miles away with a trackman and called the shop.  After talking with the fitter on the phone I knew this is where i wanted to go.

 

 

I showed up for the fitting the first weekend in March and it was actually a beautiful day after the terrible winter we are still going through.  I go into the shop and he has a great back room set up for fittings.  The room was a golf man cave we all dream of or the place where we could all see ourselves hanging out on a rainy or cold day to get our golf fix in.  It had a leather couch for anyone who would come with you or even yourself to relax and recoup on, a bar on one wall no drinks though, and practice green area for putter fittings, two bays with the trackman set up on one and tool chests with his other fitting tools around the hitting bays.  

 

The first thing he does is have me warm up while he sets up the Trackman.  He allowed me to use the B330 S I am testing so I could get numbers for the review.  While I was warming up we talked about my game and created a very relaxed atmosphere with no pressure.  

 

I went for a iron fitting, a driver fitting to fine tune my driver and 3 wood, as well as gapping for my bag and wedge selection.  The only new clubs I was going to walk out with were new irons and new wedges.  I also knew i would most likely be reshafting my driver.  

 

While I was warming up he went through my bag and check the spec on the clubs I would be testing with that day.  After watching me warmup he was able to narrow me down to 4 shafts off the bat.  KBS C-taper S, KBS Tour S, TT S300, and Project X 6.0.  The project X was the last one and he did that just to see but knew that it wasn't the fit for me.  After hitting the two shafts it came down to the C-Taper and the KBS Tour.  Both felt very smooth to me but the KBS Tour felt the best to me it just felt right.

 

Now to deciding which head was the one for me.  I hit the AP2, Apex Pro, and MP-54.  All three heads felt great.  I could have walked out with any of the three and been happy.  So for me it became nitpicking.  The AP2s were taken out of the equation because of the price of the upcharge for the KBS tour shafts.  It then came down to the MP-54 and the Apex Pro.  Both felt great, smooth, crisp, and performed great.  It seemed like I couldn't miss a shot with them. He also let me take them both outside to the range to hit them on the range with some real balls so i could see the flight outside.   Long story short on the Iron choosing it came down to look and sound and price since performance was nearly the same and the winner is the Apex Pro.  No upcharge and great feel.  

 

Next we went to the driver fitting where used my Ping G25 head and the fitting shafts he had.  Once again he speced everything right in front of me and told explained what he was doing answer all my questions.  Working within my budget he found a 3 wood and driver combo for me of the Diamana Ahina 70 g driver shaft and 80g 3 wood.  The heavier shaft was just great.  

 

I can't say enough good things about my experience.  While i was hitting the irons i mentioned how i wanted to try the Pure DTX grip so he had his other employee go and put one on one of the fitting shafts I would be using to try.  I though i would get to feel it but not swing with it.

 

He also helped gapped out my 4 iron, hybrid, and 3 wood.  I cannot say enough good things about my experience.  I got exactly what i was hoping out of it.  I was not looking for other clubs i knew what i was looking at and he helped set me up in the best combo.  

Bag: :ping-small:  Hoofer Vantage

Driver: :ping-small:  G25 10.5 Aldila NV 65 S

3 Wood:   :cobra-small:  Fly Z+ 3 Wood 13.5*

Rescue: :adams-small:  XTD ti 18* set to 17* or  :adams-small: Pro 23* 

Irons: :callaway-small:  Apex Pro 4-PW, KBS Tour S, Standard Length and Loft, 2* flat, 

Wedges: :callaway-small: Mack Daddy 2 50* bent to 51*, KBS Tour S

:vokey-small: Spin Milled 56* bent to 55*

:callaway-small: Mack Daddy 2 60* U grind KBS Tour S

Putter: :cameron-small: Futura X5 MOTO

Grips: PURE DTX Green

 

Link to comment
Share on other sites

Awesome to hear about your experience. I think hearing more stories like this would relieve a lot of people's apprehension about getting and paying for a fitting.

Driver:   :callaway-small: Epic 10.5 set to 9.5 w/ Tour AD-DI 44.5

FW:   :cobra-small: F6 baffler set at 16º

Hybrid:  NONE
Irons:   :taylormade-small:  3i 2014 TP CB  4-PW 2011 TP MC w/ TT S400

Wedges:   :nike-small: 52º :nike-small: 56º  :edel-golf-1: 60 º w/ KBS C-Taper XS Soft-stepped

Putter:   :ping-small: Sigma G Tyne 34 inches Gold dot

 

 

Link to comment
Share on other sites

Nice write up thanks. All of you guys who've endured this winter deserve this type of experience! Best luck with the new sticks.

Taylor Made Stealth 2 10.5 Diamana S plus 60  Aldila  R flex   - 42.25 inches 

SMT 4 wood bassara R flex, four wood head, 3 wood shaft

Ping G410 7, 9 wood  Alta 65 R flex

Srixon ZX5 MK II  5-GW - UST recoil Dart 65 R flex

India 52,56 (60 pending)  UST recoil 75's R flex  

Evon roll ER 5 32 inches

It's our offseason so auditioning candidates - looking for that right mix of low spin long, more spin around the greens - TBD   

 

Link to comment
Share on other sites

Thats guys I really appreciate it.  I am still waiting on the clubs to come in.  The suspense is worse than Christmas.  

 

The fitter was Mike Hovance at Perfect Swing in Lakewood, NJ.

Bag: :ping-small:  Hoofer Vantage

Driver: :ping-small:  G25 10.5 Aldila NV 65 S

3 Wood:   :cobra-small:  Fly Z+ 3 Wood 13.5*

Rescue: :adams-small:  XTD ti 18* set to 17* or  :adams-small: Pro 23* 

Irons: :callaway-small:  Apex Pro 4-PW, KBS Tour S, Standard Length and Loft, 2* flat, 

Wedges: :callaway-small: Mack Daddy 2 50* bent to 51*, KBS Tour S

:vokey-small: Spin Milled 56* bent to 55*

:callaway-small: Mack Daddy 2 60* U grind KBS Tour S

Putter: :cameron-small: Futura X5 MOTO

Grips: PURE DTX Green

 

Link to comment
Share on other sites

  • 7 years later...
On 3/15/2014 at 3:49 PM, DanUsh said:

Thats guys I really appreciate it.  I am still waiting on the clubs to come in.  The suspense is worse than Christmas.  

 

The fitter was Mike Hovance at Perfect Swing in Lakewood, NJ.

Thanks for this post I know it is old, but I would have never found Perfect Swing if it wasn’t for seeing this post.  Going to try and book a fitting there next few weeks.  Not sure if they moved, but it seems like it’s Toms River not Lakewood, but same area.

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Recently Browsing

    • No registered users viewing this page.
×
×
  • Create New...