What have you bought lately? (CHA - Club Ho's Anonymous)

[golfingbrock 576]

3 minutes ago, Golfspy_CG2 said:

JPX921 Hot Metal/Hot Metal Pro combo snd bag. 
 

 

[Golfspy_CG2 25,084]

4 minutes ago, Johnnyrogs said:

Got fit for a set of Mizuno JPX 921 Hot Metals 5-PW with the ESX F3. Moving out of a set of TM Rsi 1. Apparently Mizuno only has a 3-4 week wait time compared to months for some of the other OEMs, but I still hate waiting.

That's correct on the delivery time.  The rep was here yesterday and that's what he quoted, and my Hot Metals took one day shy of 3 weeks!  

[dlow206 5,063]

5 minutes ago, Golfspy_CG2 said:

JPX921 Hot Metal/Hot Metal Pro combo snd bag. 
 

 

I'm ready to buy the Mizunos once you move on to the next set 

[Golfspy_CG2 25,084]

25 minutes ago, dlow206 said:

I'm ready to buy the Mizunos once you move on to the next set 

Ok, I'll keep that in mind, but I plan on these and the Titleist both hanging around a while.   Go ahead people have your laugh

[Jmikecpa 12,464]

Scotty Vegas cover that was released today. Had the bag in my cart and couldn’t justify the money so settled on the head cover.


Sent from my iPhone using Tapatalk

[xOldBenKenobiX 3,575]

I just got the Tommy Armour 

Tommy Armour Impact Series No. 3 Alignment Putter - Stainless Steel Shaft

I realize I needed to get a newer putter, but did not want to spend a lot money on it, so I got this one for 40 bucks used, mainly due to the recommendations from MGS.

I am awaiting delivery.

[Rickp 20,425]

I'm ready to buy the Mizunos once you move on to the next set 

I’m thinking you may be waiting a little while. The Mizzies will play.


Sent from my iPhone using MyGolfSpy

[Jmikecpa 12,464]

Scotty Vegas cover that was released today. Had the bag in my cart and couldn’t justify the money so settled on the head cover.


Sent from my iPhone using Tapatalk

[cksurfdude 7,896]

On 10/6/2020 at 11:55 AM, Golfspy_CG2 said:

JPX921 Hot Metal/Hot Metal Pro combo snd bag. 

Do we have a drool or maybe better a jealous emoji to react with....

[Golfspy_CG2 25,084]

9 minutes ago, cksurfdude said:

Do we have a drool or maybe better a jealous emoji to react with....

  

[Chip Strokes 2,259]

delivery man was busy today...

vintage blades came in. i’m gonna try to get to the range later with them 

SC futura showed up, along with the SC pistolero plus grip i’ll be putting on it. 

[dlow206 5,063]

picked up another Stability shaft, this one to put in my DF 2.1. price was too good to pass up on the shaft.

[chisag 11,455]

... Not bought but received all new Lamkin ST+2 grips. I have been using Lamkin UTx grips for several years now. Playing without a glove I need max tackiness from my grips and UTx fits the bill if you wipe them before every or every other shot. I needed to reshaft my T100-S with Steelfiber 95 r-flex shafts and after having them in my P760's I needed to cut them down about 1/2" for each iron. The UTx were used for only 2 rounds and when I tried to remove them, they stuck to the grip tape and unfortuneatly had to be cut off. I have never had a problem removing UTx grips so losing 9 new grips was a huge bummer and I contacted Lamkin to find out if they were using a different compound or construction and let them know my dissatisfaction with my latest UTx purchase and IF they are different I was ready to try Golf Prides CP2 Pro grips, but would prefer to stay with Lamkin. 

... While Lamkin said grips are not meant to be removed, they admitted new grips sticking to the grip tape was unusual and requested pictures and asked several questions they wanted answers to and said for my trouble they would send me double my problem grips. I had been interested in the ST+2 Hybrid grip as it was described as tackier than the UTx. So I bought a ST+2 grip and installed it Sunday. Then removed it Monday and it came off easily and reinstalled securely like it was the first time it was installed. I really liked the ST+2 and found it quite different than "sticky" grips I have used in the past. It does not feel sticky or even very tacky but the grip was very secure and it never moved in my hands. I let Lamkin know I would like ST+2's as replacements for my UTx and the sent my not 9, but 18 ST+2 grips via 2 day Fed Ex which is the kind of Customer Service that makes me stay with them. I really think double my problem grips is way above and beyond but this is how you keep customers for life. 

... I played 18 yesterday with ST+2 grips on my irons and was thrilled with their performance. ST stands for "Smooth Tack" with excellent traction and does not move in my hands without feeling sticky which I think is the best of both worlds! I do not change style of grips often and played 3GEN for many years before moving to UTx when the 3GEN's were discontinued and I will post a mini review after playing these several more rounds. 

 

 

[Buffly 421]

I just pulled the trigger on a Set of Hogan Edge Forged Irons - used from quite a bit back in time. I can't wait to get them and try them out. They are the same lofts as my Ping G2 irons so we will see what happens.

[tehuti 501]

On 10/6/2020 at 9:28 AM, xOldBenKenobiX said:

I just got the Tommy Armour 

Tommy Armour Impact Series No. 3 Alignment Putter - Stainless Steel Shaft

I realize I needed to get a newer putter, but did not want to spend a lot money on it, so I got this one for 40 bucks used, mainly due to the recommendations from MGS.

I am awaiting delivery.

Nice putter. Let us know how you like it once you have had a chance to roll some putts with it.

[dlow206 5,063]

4 hours ago, chisag said:

... Not bought but received all new Lamkin ST+2 grips. I have been using Lamkin UTx grips for several years now. Playing without a glove I need max tackiness from my grips and UTx fits the bill if you wipe them before every or every other shot. I needed to reshaft my T100-S with Steelfiber 95 r-flex shafts and after having them in my P760's I needed to cut them down about 1/2" for each iron. The UTx were used for only 2 rounds and when I tried to remove them, they stuck to the grip tape and unfortuneatly had to be cut off. I have never had a problem removing UTx grips so losing 9 new grips was a huge bummer and I contacted Lamkin to find out if they were using a different compound or construction and let them know my dissatisfaction with my latest UTx purchase and IF they are different I was ready to try Golf Prides CP2 Pro grips, but would prefer to stay with Lamkin. 

... While Lamkin said grips are not meant to be removed, they admitted new grips sticking to the grip tape was unusual and requested pictures and asked several questions they wanted answers to and said for my trouble they would send me double my problem grips. I had been interested in the ST+2 Hybrid grip as it was described as tackier than the UTx. So I bought a ST+2 grip and installed it Sunday. Then removed it Monday and it came off easily and reinstalled securely like it was the first time it was installed. I really liked the ST+2 and found it quite different than "sticky" grips I have used in the past. It does not feel sticky or even very tacky but the grip was very secure and it never moved in my hands. I let Lamkin know I would like ST+2's as replacements for my UTx and the sent my not 9, but 18 ST+2 grips via 2 day Fed Ex which is the kind of Customer Service that makes me stay with them. I really think double my problem grips is way above and beyond but this is how you keep customers for life. 

... I played 18 yesterday with ST+2 grips on my irons and was thrilled with their performance. ST stands for "Smooth Tack" with excellent traction and does not move in my hands without feeling sticky but of course that is the best of both worlds! I do not change style of grips often and played 3GEN for many years before moving to UTx when the 3GEN's were discontinued and I will post a mini review after playing them several more rounds. 

 

 

What method do you use to remove grips?

[dlow206 5,063]

Here is my new LAB DF2.1. If anyone is curious how it compares in size to another mallet, see below. It is enormous.

[chisag 11,455]

24 minutes ago, dlow206 said:

What method do you use to remove grips?

 

I have a wire remover that is coated in grip solvent, worked between the grip and tape then keep adding solvent so the wire slides/works it's way down the grip until it reaches the end cap and the grip slider off. 

[Chip Strokes 2,259]

10 minutes ago, dlow206 said:

Here is my new LAB DF2.1. If anyone is curious how it compares in size to another mallet, see below. It is enormous.

holy sh*t that’s a big putter.  does it double as a sledge hammer?

[Josh Ross 586]

53 minutes ago, dlow206 said:

Here is my new LAB DF2.1. If anyone is curious how it compares in size to another mallet, see below. It is enormous.

I was already a decent putter but I'm deadly with that thing. Love my DF2.1 and can't imagine ever changing. Feels like cheating!