superduper Posted April 10, 2015 Share Posted April 10, 2015 I'm looking for a JDM driving iron which made of titanium. Does this thing exist? curious.... Link to comment Share on other sites More sharing options...
superduper Posted April 11, 2015 Author Share Posted April 11, 2015 Titanium long irons? Link to comment Share on other sites More sharing options...
BIG STU Posted April 12, 2015 Share Posted April 12, 2015 I don't know if they exist in the retail world but there are enough talented machinists in the golf world that could probably make you one Driver ---- Callaway Big Bertha Alpha Speeder 565 R flex- 5W TM V-Steel Fubuki 60r--- 7W TM V-Steel UST Pro Force Gold 65R----- 9 W TM V Steel TM MAS stiff---- Irons 2015 TM TP CB Steel Fiber 95 R--- GW Callaway Mack Daddy 2 52* shaft unknown junk pile refugee. SW Callaway PM Grind 56* Modified sole grind--- KBS Tour Wedge-- LW Vokey 58* SM5 L grind--- Putter Ping B90I Broom Stick G Link to comment Share on other sites More sharing options...
jaskanski Posted April 12, 2015 Share Posted April 12, 2015 Titanium alone would make for a rather weak driving iron. It needs a bit more mass (or volume) to make use of any of it's inertia. With this in mind, some irons exist with titanium either the main head material or a supplementary weight to redistribute the mass around the head to create a kind of perimeter weighting for more forgiveness. If you specifically have JDM on your radar, then PRGR make the "Egg" which is a strange looking beast which works quite well: http://www.tourspecgolf.com/prgr-2013-egg-i-ut-utility-club Alternatively if you fancy yourself as a bit of a player, then Yonex make a titanium core blade which looks like sex on a stick: http://www.tourspecgolf.com/yonex-2014-titanium-hybrid-mb-forged-iron-5-pw-6pc-set ..but the lowest loft version is a 21 degree 3-iron. Of course the older Mizuno MP-59 does this sort of trick too. Like I said titanium doesn't really lend itself that well to iron/hybrid or even some fairway wood designs simply because of the weight - or lack of it. Titanium really only works with oversized (think maximum legal limit of 460cc) in driver head designs where weight is needed to be distributed over a much larger area (but still supplemented by tungsten weights often). If I were looking for a driving iron from a JDM stable, then I'd probably opt for the A-Grind: http://www.tourspecgolf.com/blog/a-grind-golf-japan/ Link to comment Share on other sites More sharing options...
superduper Posted May 4, 2015 Author Share Posted May 4, 2015 Titanium alone would make for a rather weak driving iron. It needs a bit more mass (or volume) to make use of any of it's inertia. With this in mind, some irons exist with titanium either the main head material or a supplementary weight to redistribute the mass around the head to create a kind of perimeter weighting for more forgiveness. If you specifically have JDM on your radar, then PRGR make the "Egg" which is a strange looking beast which works quite well: http://www.tourspecgolf.com/prgr-2013-egg-i-ut-utility-club Alternatively if you fancy yourself as a bit of a player, then Yonex make a titanium core blade which looks like sex on a stick: http://www.tourspecgolf.com/yonex-2014-titanium-hybrid-mb-forged-iron-5-pw-6pc-set ..but the lowest loft version is a 21 degree 3-iron. Of course the older Mizuno MP-59 does this sort of trick too. Like I said titanium doesn't really lend itself that well to iron/hybrid or even some fairway wood designs simply because of the weight - or lack of it. Titanium really only works with oversized (think maximum legal limit of 460cc) in driver head designs where weight is needed to be distributed over a much larger area (but still supplemented by tungsten weights often). If I were looking for a driving iron from a JDM stable, then I'd probably opt for the A-Grind: http://www.tourspecgolf.com/blog/a-grind-golf-japan/ The titanium in a driving iron that I'm looking for is in the face material. Not just the inserts like in MP-59 or the tungsten weighting. I'm looking for extra distance for my driving iron since I don't game a 3 wood. Can you suggest anything that can improve my distance in my driving iron? Link to comment Share on other sites More sharing options...
jaskanski Posted May 4, 2015 Share Posted May 4, 2015 Other than less loft, longer shafts and swinging it faster? Not really. Titanium in itself (as explained) isn't the solution to your perceived problem - even with face inserts. Titanium is primarily used to get weight away from the face (which would otherwise be steel) so the perimeter weighting can be increased to provide greater MOI. The face can be thin enough to "flex" on impact to give a CoR effect, but the results on distance are pretty negligible. Most if not all previous designs of driving irons with any inherent titanium use have largely been dropped in favour of much more efficient and reliable hybrid and fairway wood designs these days - hence you will struggle to find something to fit your criteria. Link to comment Share on other sites More sharing options...
superduper Posted May 10, 2015 Author Share Posted May 10, 2015 Other than less loft, longer shafts and swinging it faster? Not really. Titanium in itself (as explained) isn't the solution to your perceived problem - even with face inserts. Titanium is primarily used to get weight away from the face (which would otherwise be steel) so the perimeter weighting can be increased to provide greater MOI. The face can be thin enough to "flex" on impact to give a CoR effect, but the results on distance are pretty negligible. Most if not all previous designs of driving irons with any inherent titanium use have largely been dropped in favour of much more efficient and reliable hybrid and fairway wood designs these days - hence you will struggle to find something to fit your criteria. I have thought about that... since the iron face is thick... the trampolin effect on the ball is minimal.... so according to you, using titanium on irons is useless? Link to comment Share on other sites More sharing options...
jaskanski Posted May 10, 2015 Share Posted May 10, 2015 I have thought about that... since the iron face is thick... the trampolin effect on the ball is minimal.... so according to you, using titanium on irons is useless? Judging by the pile of driving irons in the bargain basement bin or trying to be sold on shopping channel tv - pretty much. If you want to have a yardstick of what works and what doesn't in terms of tech or performance, then a glance into the bags of those who play for a living is usually a guide to what is relevant. If titanium in irons really had any credibility, then that's where you would find it. Link to comment Share on other sites More sharing options...
superduper Posted May 13, 2015 Author Share Posted May 13, 2015 Judging by the pile of driving irons in the bargain basement bin or trying to be sold on shopping channel tv - pretty much. If you want to have a yardstick of what works and what doesn't in terms of tech or performance, then a glance into the bags of those who play for a living is usually a guide to what is relevant. If titanium in irons really had any credibility, then that's where you would find it. people who play golf for a living are very good golfers. and I'm not... you hand them the "Acer XK driver" and they will hit it 300 yards..... Link to comment Share on other sites More sharing options...
jaskanski Posted May 15, 2015 Share Posted May 15, 2015 Another way of looking at it is that the rest of the golfing world is wrong and driving irons are a lot easier to hit for anybody (including pros) than hybrids and they should all be made from titanium. Or alternatively, you may have to commission someone to build your coveted titanium driving iron to prove a point. Either way, I think you may be wasting your valuable time. Good luck in your search. Link to comment Share on other sites More sharing options...
Jmikecpa Posted May 20, 2015 Share Posted May 20, 2015 Tommy Armour made Ti irons like 20 years ago and they were large, took shovel to a whole new level. Not sure if there was any benefit to these but as said above you need a lot more mass to gain a benefit. WITB 2024 Driver: Qi10 LS 9* HZRDUS RDX Smoke Blue 60 6.5 Fairway: M5 15* Evenflow Black 75g 6.5 Fairway: Sim 19* HZRDUS Red 75g 6.5 Hybrid: 0317x 22* KBS Proto 95x Irons: X Forged CB 5 - PW MMT 105 TX Wedges: Jaws Raw 50*, 54* & 58* TTDG "OG" Spinner Putter: Toulon Madison BGT Fire 34.75" Ball: Z Star Diamond Link to comment Share on other sites More sharing options...
superduper Posted May 22, 2015 Author Share Posted May 22, 2015 Another way of looking at it is that the rest of the golfing world is wrong and driving irons are a lot easier to hit for anybody (including pros) than hybrids and they should all be made from titanium. Or alternatively, you may have to commission someone to build your coveted titanium driving iron to prove a point. Either way, I think you may be wasting your valuable time. Good luck in your search. Well driving irons are "easier" to hit than a traditional 2 iron (I have a Snake eyes 2 iron). I don't know what you call the MP-H4. Is it a driving iron? Is it a hybrid? But I can hit it as straight as a 7 iron. And I don't play golf as often as the people who make a living playing golf. I call myself lucky if I can play once a week. Don't have the time and resource to play that often. I slice with my driver. But my driving iron is as straight as an indian arrow. When my swing is off, I pick up my driving iron and hit it as far as my 5 wood (200 yards). Sometimes I want something that is a bit longer maybe about 15 yards longer. Link to comment Share on other sites More sharing options...
johnmeeker689 Posted October 9, 2016 Share Posted October 9, 2016 I totally love this version, but my current putter also make me satisfy and it seems very luxurious for me to pay . Golf Club for Beginner Here Link to comment Share on other sites More sharing options...
AH1980MN Posted October 11, 2016 Share Posted October 11, 2016 Adams made a very iron-like hybrid using titanium a few years back... WITB: Adams 9064LS 9.5* (until I cracked the face) Adams Super LS 17* Adams XTD Ti 23* Wilson Staff Ci7 4-PW Adams wedges: 52/7 56/13 60/7 Wilson Staff Infinite Southside putter/Odyssey DualForce 660 putter Link to comment Share on other sites More sharing options...
fozcycle Posted October 11, 2016 Share Posted October 11, 2016 How about these? They aren't titanium but they look pretty solid. https://www.bombtechgolf.com/grenade-driving-iron-package-pre-order/ Driver: 0311 XF 10.5* w/Project X Cypher 40 gram Senior shaft or 0811 XF 12* w/Evenflo Riptide CB Senior shaft Fairways: 0211 5W & 7W w/ Evenflo Riptide CB regular shaft and Tour Edge E521 9W w/Fubuki HD50 regular shaft Hybrid: None in bag at the moment Irons: Titleist T300 5-PW w/Fubuki MV Senior graphite shafts w/Golf Pride Tour Wedges: Edison forged 49*, 53* and 57* wedges with KB PGI Senior shafts(80 grm). Putter: 33” Evnroll ER6R or ER2 or Bellum Winmore Model 707, or Nike Method Core Drone w/Evnroll Gravity Grip Bag: Vice cart bag(Black/Lime). Ball: Snell MTB Prime X, Maxfli Tour/S/X CG, Titleist Pro V1x or Titleist TruFeel Using Shot Scope X5 and Pinned Rangefinder Link to comment Share on other sites More sharing options...
Gogolf Posted January 9, 2017 Share Posted January 9, 2017 There are some awesome driving irons on the market right now and z u45 irons are going for a good price. You can get the same distance out of the current irons of the market by changing the lofts/shafts to correct the yardage gap you're looking to fill. Link to comment Share on other sites More sharing options...
Rekklss Posted January 11, 2018 Share Posted January 11, 2018 Try this 2 iron. Miura ICL-601. My current gamer. Also the Titleist U series play easy too. Sent from my XT1650 using Tapatalk Link to comment Share on other sites More sharing options...
Gg Owen Posted January 29, 2018 Share Posted January 29, 2018 By far the best I owned - tried is the bomb tech.The launch and huge sweet spot are a win win for me.Very good addition to my bag Link to comment Share on other sites More sharing options...
AWLBMW Posted January 29, 2018 Share Posted January 29, 2018 It's a bit dated, and not JDM or Ti, but I use a callaway x utility proto 18* for tighter desert local courses. Very tough metal and straight off the tee. Sent from my iPhone using MyGolfSpy WITB 2021 Driver: Cleveland Launcher HB Turbo 9* w/ C.Kua Stiff FW: Cleveland Launcher HB Turbo 15* w/ C.Kua Stiff HY: Cleveland Launcher Halo 19* w/ C.Kua Stiff Irons: Titleist 716 AP1 4-PW w/ KBS 90 Stiff Wedges: Vokey SM8 50*, 54*, & 60^ Putter: Scotty Cameron Studio Laguna 2 OR OG Futura Ball: ProV1/V1x OR Chrome Soft TT Bag: Sun Mountain 2019 4.5 14way carry Clothes: Nike OR Under Armour Link to comment Share on other sites More sharing options...
SportsPenguin Posted August 11, 2018 Share Posted August 11, 2018 Anybody know if it's worth it to go with the srixon z u65 over the u45? I'm looking to add the 20* to my bag. Link to comment Share on other sites More sharing options...
Shankster Posted August 11, 2018 Share Posted August 11, 2018 Anybody know if it's worth it to go with the srixon z u65 over the u45? I'm looking to add the 20* to my bag. Haven't hit either. But I'd imagine you couldn't go wrong with either one. Link to comment Share on other sites More sharing options...
GB13 Posted August 11, 2018 Share Posted August 11, 2018 Anybody know if it's worth it to go with the srixon z u65 over the u45? I'm looking to add the 20* to my bag.Both are good. The only real difference is the feel. The U65 has a little more consistent feel across the face. The U45 is just a little harsher when you mis hit it. Wilson Staff C300 9.0* Fujikura Pro 58 stiff Callaway Rogue 3W Mitsubishi Diamana D+ LTD 80 stiff Mizuno MP-18 MMC FLI-HI 2 iron UST Mamiya Recoil 95 stiff Ping I200's 4-W Aerotech Steelfiber I110 CW stiff Ping Glide 52* and 58* stiff Bettinardi Studio Stock #38 Armlock Link to comment Share on other sites More sharing options...
SportsPenguin Posted August 11, 2018 Share Posted August 11, 2018 Both are good. The only real difference is the feel. The U65 has a little more consistent feel across the face. The U45 is just a little harsher when you mis hit it. Thanks for that info. That really makes the decision a bit easier! Link to comment Share on other sites More sharing options...
NiftyNiblick Posted August 11, 2018 Share Posted August 11, 2018 I've got a Mizuno Fli-Hi, circa 2005, and a ludicrously overpriced Epon. They're both good. An old PRGR 200i is also good. Dunlop once made a more reasonably priced version of it but i can't remember the name.. The old Ping Eye 2 1-iron was also good off the tee if the stock shaft wasn't too "tip-stiff" for you to elevate the ball. . The similar Wilson 1200GE 1-iron was another good club off the tee. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.