TESTERS ANNOUNCED! - ACCRA Fx Series Driver Shafts

[GolfSpy Barbajo 8,997]

 

TESTERS WANTED!!  - APPLY NOW!!!

 

We're hitting the sweet spot of summer - are you hitting the ball as far as you'd like? Do you think a different shaft would make a difference?

 

Well, that's what we at MGS would like to know, and we'd like 9 MGS loyalists to help us find out. And specifically we'd like to know if a new ACCRA Fx Series shaft will give you a few extra yards while keeping the ball in the short grass.  The FX Series is new this year, and features 3 different types of shaft for 3 different types of player.

 

 

Here's the skinny, according to ACCRA: 

 

Fx 100: Promotes higher initial launch with controlled spin.  For those wanting to increase launch angle  with a super light-weight shaft. 

 

Fx 200: Promotes mid initial launch with controlled spin. For those need some tip stability, but with a kick.

 

Fx 300: Promotes lower initial launch with controlled spin. For those needing more tip stability, but also with a kick.

 

 

(We will NOT be testing the Fx 400 shaft at this time)

 

HOW TO ENTER: 

 

1. You MUST be an MGS Forum Member to apply. If you aren't, sign up HERE.

2. List your current driver shaft, flex and swing speed.

3. You MUST post a picture of your current driver shaft!

4. You MUST be able to install your own shaft, or have it done for you. No adapters are included. 

5. Open to avid golfers in the Continental US and Canada!

 

Based on your information, we'll work with ACCRA to get you into one of the three Fx Series shafts.

 

 

We'll announce the selected testers the week of July 20th.

 

For more information, check out the ACCRA website.

 

Good luck!!

[BGoergen 30]

Current shaft is a Fujikura Motore F3 80 gram, in X-stiff.  SS last measured averaged 117 mph with driver.  I can install my own shaft.  

 

[lmh3 73]

Current shafts rotate between Project X Handcrafted LZ 6.0, Oban Kiyoshi Tour Limited 60 S, and Aldila Rogue 110 MSI 60 S. I have been using the Project X a majority of the season. Clubhead speed is 103 and I do all of my own club work.

[BSB 0]

My current driver and three wood have the dymatch 2.0 in them. Love the feel. Would love to have my club fitter build me a club with one of these shafts!

[KCLeo12 1,764]

I would love to give that FX 300 a try.

 

Current rotation is Aldila Tour Green 65x Tipped 1", Aldila Phenom NL 70x tipped 1" and Tour Spec 70x tipped 1". My swing speed is 122mph

 

I can install my own shafts and have access to a Trackman.

 

[37's Fortune 0]

Veylix Alpina

Swing Speed 114

Able to install

[rreinke23 0]

Current driver shaft is a Graphite Design Tour AD DI - 7X tipped a quarter of an inch with a midsize new decade grip with 6 extra wraps under the right hand. Swing speed is 118 consistanly and can turn up to 125.  Can install own shaft and also have a trackman.

[Jagaboochie 0]

Current shaft that I am playing is a tour issue UST Mamiya Elements Earth8f4 (stiff flex) tipped to play like an X flex. My swing speed is between 100-110 on a regular basis. I am able to install myself and would love a shot at one of these shafts! Thanks for your time

[evershady 877]

I currently play a Grafalloy Bi-matrix 80 Gram X-flex in a Ping Anser 8.5

Swing speed of 125+

 

I tend to still hit my drives very high even when I set the driver to 8 which is where I normally have it, would like a lower ball flight. 

 

I did the install of this shaft from the stock one so I can handle doing that again.

[chasbal 2]

I installed the Pro Launch Blue 55s in my Bang driver head. My swing speed is between 95-100 and I average around 260-280 yards with my tee shots. I would like to try the ACCRA FX 200.

[Perry D 1]

ACCRA Fx series driver shaft tester application is as follows:

 

Current driver:  PING G30 9 degree

Current shaft flex:  stiff

Swing speed: 100-102 mph

 

Certainly could use a few extra yards; the Fx 200 or Fx 300 would be a most desired choice to test.  Thank you for the opportunity.

 

All the best,

Perry

 

Attached is the pic of my standard Tour 65 gram stiff shaft.

 

 

 

 

[abergervt 1]

I currently play a 915 D3 10.5 with a Tour-AD-DI 7x Shaft at 45inches installed. My swing speed is between 105-115 MPH.

[tider 19]

Tider992010

Current Driver:  Cleveland CG 265 Black with 39 Gram Miyazaki C Kua Shaft, Stiff Flex, 90 mph swing speed.  

[apex430 0]

Matrix Rul 70

R1 Driver

SS: 90mph

 

[Teaj 0]

If I get the chance to hit this shaft you can just ship it down the road to Brampton with my KBS C-Taper shaft order im putting in next week

 

Current Driver:  Big Birtha Alpha '14

Shaft Flex:  X-Stiff, Tipped 0.5" playing at 44.75"

Swing Speed: 112mph

 

I do all my own club work and can test on Foresight.  

 

Spin rates hover around the 2000rpm and launch 12-13 deg carry 285ish with lots of roll out.  

 

self educated in shaft performance and understand how weight/flex/length and torque play a roll.

 

Thanks again for the opportunity

 

Regards

 

Teaj

[kfilly20 121]

Current Driver : SLDR White 12*

 

Current Shaft : Fujikura Speeder 57 stiff 

 

Swing speed between : 100 -105

 

[Ike 11]

Current favorite driver shaft is Fujikura EXS 5.0 in R2 flex.  Clubmaker and tester with monitor.  Swing speed is 80.  US res.

 

[golf_goddo 1]

Current shaft: Aldila Rogue Silver 60 110 MSI stiff flex 105 swing speed
 

[MarkBuns 0]

I use a TaylorMade JetSpeed driver (stiff flex).  I would try test the new shaft to improve my driving game.  I don't have my golf club with me but found a picture. Thanks, MarkBuns

 

[Akornowski 0]

Current shaft I play is the Project X  LZ 6.0
 
Average clubhead speed hovers around 100mph

 

Can install the shaft on my own