Member DIY Club Restores/Refurbs/Refinishes

[Xstiffshafts 276]

Your polymer is too thick and you're spraying it on too thick is why it's wrinkling. It needs to be thinned down, atomized more and sprayed from a further distance. And you'll want a bake on product

Thx RB7, your knowledge is always appreciated.

You see the same problem here just to a lesser extent? I've been experimenting with different techniques.

 

 

 

Sent from my iPhone using Tapatalk Pro

[mjtgolf1911 11]

Trying to do a clear paint fill on the weights for my Scotty.  Did a color fill on the numbers and let dry for days, but when i try to fill with the Tamiya clear it causes the color paint in the numbers to bleed and run.

What is causing this since the paint has dried for days and its another paint on top of it?

Any suggestions?

 

 

[RookieBlue7 1,692]

Thx RB7, your knowledge is always appreciated.

You see the same problem here just to a lesser extent? I've been experimenting with different techniques.

 

 

 

Sent from my iPhone using Tapatalk Pro

Yep, same thing. Adjust your air up to about 35 psi and barely open the supply from the cup. I adjust the needle valve half a round open. I also thin it waaaaaay down with the product I use. Like almost translucent. My product goes on 1-3 mils thick, which is thinner than a household trash bag. And then I bake it in the oven I built.

[RookieBlue7 1,692]

I'd also recommend preheating the metal so it'll flow better once it's on there and the solvents flash off a little quicker and it becomes more uniform

[Xstiffshafts 276]

I'd also recommend preheating the metal so it'll flow better once it's on there and the solvents flash off a little quicker and it becomes more uniform

Yeah I have been preheating at the temp I cure at, which is about 315°-320°. I usually preheat for approximately 7-8 mins to get the solvents to evaporate when they hit the metal and leave the pigment behind. I haven't been thinning the product I use (which cures at ~315° for about an hour) and is tougher than nails once it cures. It's a firearms coating that I've seen others use successfully... I'll PM you the name and see what you'd suggest on thinning.

 

 

Sent from my iPhone using Tapatalk Pro

[Ballenbrandon 12]

So I finally finished my first putter refurb. Definitely a learning experience that taught me a ton. Now I know better for my next putter. Before and after pics.

 

 

Sent from my iPhone using MyGolfSpy

[Liberty Ball Markers 1,250]

It looks great! There is no stopping now - you're hooked!

 

 

Sent from my iPhone using MyGolfSpy

[Xstiffshafts 276]

Very nicely done dude

 

 

Sent from my iPhone using Tapatalk Pro

[Ballenbrandon 12]

I just need to learn to get the coloring a little more even. A couple places that don't look even bit still a fun first go.

 

 

Sent from my iPhone using MyGolfSpy

[Shankster 26,552]

Just saw this thread... [emoji102] wow. Pretty awesome stuff on here. Keep up the good work Gents. Already makes me want to get my new putter blacked out and I don't even have it yet.

 

 

Sent from my iPhone using MyGolfSpy

[Liberty Ball Markers 1,250]

Just saw this thread... [emoji102] wow. Pretty awesome stuff on here. Keep up the good work Gents. Already makes me want to get my new putter blacked out and I don't even have it yet.

 

 

Sent from my iPhone using MyGolfSpy

Oh yeah - murdered out putters make the world go 'round!

 

 

http://www.instagram.com/libertyballmarkers

 

http://www.ebay.com/usr/libertyballmarkers

[Shankster 26,552]

Can it be done to the Odyssey Works #1 Versa?

 

 

Sent from my iPhone using MyGolfSpy

[Shankster 26,552]

I am going to attempt a stamping on my new wedges. Trying on the old ones first. I'll be sure to put up an embarrassing end result photo.

 

 

Sent from my iPhone using MyGolfSpy

[Xstiffshafts 276]

Can it be done to the Odyssey Works #1 Versa?

 

 

Sent from my iPhone using MyGolfSpy

Yeah in some form or fashion. Either strip the pvd/plating and black oxide or blast followed by black polymer.

 

Here's my gamer that I just finished in black oxide.

 

 

 

Sent from my iPhone using Tapatalk Pro

[mjtgolf1911 11]

My first project repainting my SM6s this off season.  They were already the black finish wedges, but I decided to change them up and go with a Master's Color scheme for this year.  Here is to hoping it brings out the best of my short game this summer!

 

[Xstiffshafts 276]

Nice job

 

 

Sent from my iPhone using Tapatalk Pro

[RookieBlue7 1,692]

EvnRoll ER6

 

 

 

[Xstiffshafts 276]

That's fantastic rb7

 

 

Sent from my iPhone using Tapatalk Pro

[MDGolfHacker 7,022]

That's awesome!!

 

MDGolfHacker

[McaseyM 1,711]

RB7, that thing looks awesome!

 

 

Sent from my iPhone using MyGolfSpy