Jump to content

Got Problems?


ole gray

Recommended Posts

OUCH!

I could say "I feel your pain!"  But I hope I never have to.  I recommend alcohol.

 

 

whoa....any time I think I have it bad I'm going to bookmark this and re-read it.  

 

hope things become bearable for you soon.... you have my sympathies.

 

 

Thanks boys! I think a few apple pie shines may be consumed tonight.

  • Like 3

In the bag:
Driver: :titelist-small: TSi2 Project X HZRDUS Smoke Black RDX 6.0
Hybrid: :Sub70: 939X 3 Hybrid Project X Even Flow Riptide 6.0

Hybrid: Maltby KE4 HDI 4 and 5 UST Recoil 660 F4
Irons: Maltby DBM Forged UST Recoil 660 F4
Wedge: :cleveland-small: Smartsole S

Wedge: SCOR4161 46° and 50° 
Putter :Sub70: Sycamore 005 Wide Blade
Bag: 
:Ogio: Alpha Convoy 514
Balls::Snell: MTB-X or Black

Cart: :CaddyTek: CaddyLite ONE Ver. 8


God Bless America🇺🇸, God save the Queen🇬🇧, God defend New Zealand🇳🇿 and thank Christ for Australia🇦🇺!

Link to comment
Share on other sites

Thanks boys! I think a few apple pie shines may be consumed tonight.

Now ya cooking with Crisco [emoji378]

 

 

Sent from my iPhone using MyGolfSpy

  • Like 1

Cleveland Launcher XL 10.5 Driver
Cleveland Launcher xl halo hy-wood 18 Degree
Cleveland Launcher XL Halo 7- wood
Cleveland Launcher XL Irons 5 - PW 
Cleveland CBX 2 50 & 54 Degree Wedge
Cleveland CBX Full-Face Wedge 58 degree
Cleveland Huntington Beach SOFT Premier 11




 

 

 



 

 

 

Link to comment
Share on other sites

Thanks boys! I think a few apple pie shines may be consumed tonight.

maybe Swiss Kriss would help too.

We don’t stop playing the game because we get old; we get old because we stop playing the game.”

Link to comment
Share on other sites

Last rant from me.

 

We had liftoff last night and the pain was the single worst experience I've had which includes the other injuries I've mentioned plus having half the top joint of a finger taken off by a table saw.

 

It was horrific. I hope that's the last of that because I never want to experience anything like that again.

 

Me and my arse are out.

Table saw injuries are not fun/funny. I cut my left thumb down to the tendon in 1983.... it still bothers me. I cut 1/2" off of my left ring finger in 1991 on an overhead router. Worst pain I have ever experienced. I miss that half inch of finger to this day. 

  • Like 3
Link to comment
Share on other sites

Can you take it to somewhere that will put it on a scanner and give you the codes? That would help immensely.

Good thought! It's still at the dealer this week; they gave her a loaner while they're test driving it for a few days. Their latest guess .. oops, I mean "evaluation"? The non-OEM (Sylvania Silver Star) brake light bulbs I put in after the originals burnt out...... No kidding.

WITB of an "aspiring"  😉 play-ah ...
..Callaway Big Bertha B21 driver (Recoil ES 450/F3)
..Callaway Bertha Mini 1.5 (UST ProForce V2-HL 5/F3)
..Callaway Epic Max 5W (PX Cypher 50/5.0)
..Callaway Big Bertha 4H and 5H (both Recoil ZT9/F3)
..PXG 0211 6i-GW (Mitsubishi MMT 60/A) 
..Cleveland CBX2 54 and CBX 60 (Rotex graphite)
..EvnRoll ER5 or MLA XDream (Edel EAS 4.0 on the bench)
..all in a Datrek bag on an MGI Zip Navigator electric cart.

Forum Member tester for the ExPutt Putting Simulator (2020)

Link to comment
Share on other sites

Good thought! It's still at the dealer this week; they gave her a loaner while they're test driving it for a few days. Their latest guess .. oops, I mean "evaluation"? The non-OEM (Sylvania Silver Star) brake light bulbs I put in after the originals burnt out...... No kidding.

 

They're full of chit. It could be a simple ground issue, but unless they give you the codes, you'll never find out. If they don't give them to you, go to an auto parts store and have them scan it for you and give you any fault codes. I can do it myself because I have an OBD II reader than uses blue tooth and a couple of apps on my phone that'll pretty much read everything.

  • Like 2

In the bag:
Driver: :titelist-small: TSi2 Project X HZRDUS Smoke Black RDX 6.0
Hybrid: :Sub70: 939X 3 Hybrid Project X Even Flow Riptide 6.0

Hybrid: Maltby KE4 HDI 4 and 5 UST Recoil 660 F4
Irons: Maltby DBM Forged UST Recoil 660 F4
Wedge: :cleveland-small: Smartsole S

Wedge: SCOR4161 46° and 50° 
Putter :Sub70: Sycamore 005 Wide Blade
Bag: 
:Ogio: Alpha Convoy 514
Balls::Snell: MTB-X or Black

Cart: :CaddyTek: CaddyLite ONE Ver. 8


God Bless America🇺🇸, God save the Queen🇬🇧, God defend New Zealand🇳🇿 and thank Christ for Australia🇦🇺!

Link to comment
Share on other sites

They're full of chit. It could be a simple ground issue, but unless they give you the codes, you'll never find out. If they don't give them to you, go to an auto parts store and have them scan it for you and give you any fault codes. I can do it myself because I have an OBD II reader than uses blue tooth and a couple of apps on my phone that'll pretty much read everything.

My father-in-law bought a scanner from Harbor Freight for $15.  We take the codes off the scanner and plug them into Google.  

 

Never had an issue doing this and I feel certain it has saved us in countless wasted dollars and time.

  • Like 2
Link to comment
Share on other sites

They're full of chit. It could be a simple ground issue, but unless they give you the codes, you'll never find out. If they don't give them to you, go to an auto parts store and have them scan it for you and give you any fault codes. I can do it myself because I have an OBD II reader than uses blue tooth and a couple of apps on my phone that'll pretty much read everything.

My father-in-law bought a scanner from Harbor Freight for $15. We take the codes off the scanner and plug them into Google.

 

Never had an issue doing this and I feel certain it has saved us in countless wasted dollars and time.

Great tips! Thanks gents!
  • Like 3

WITB of an "aspiring"  😉 play-ah ...
..Callaway Big Bertha B21 driver (Recoil ES 450/F3)
..Callaway Bertha Mini 1.5 (UST ProForce V2-HL 5/F3)
..Callaway Epic Max 5W (PX Cypher 50/5.0)
..Callaway Big Bertha 4H and 5H (both Recoil ZT9/F3)
..PXG 0211 6i-GW (Mitsubishi MMT 60/A) 
..Cleveland CBX2 54 and CBX 60 (Rotex graphite)
..EvnRoll ER5 or MLA XDream (Edel EAS 4.0 on the bench)
..all in a Datrek bag on an MGI Zip Navigator electric cart.

Forum Member tester for the ExPutt Putting Simulator (2020)

Link to comment
Share on other sites

My wife has a 2002 Mercedes E320 wagon that has gremlins in it.  When she makes a right hand turn into a driveway, the doors unlock.  When it gets cold (starting about now because we have a freeze warning tonight), the windows don't always go up.  The LCDs on the dash have missing segments.  She loves the car, but has been scoping out SUVs.  Very few of them have the luggage space of the E320 wagon until you look at the largest models; then they are too big.

Have you checked out the Mercedes GLC 300?  It really feels a lot like driving the E350, just a bit higher off the ground with a lot more room in the back.  Just picked one up before Labor Day for a long trip out East. (Still keeping the E350, though) ;)

  • Like 2

What's In The Bag

Driver :titelist-small:

Titleist 913 D2 10.5* (set to 9.75* / Neutral) 46" Paderson KINETIXX Kevlar Green - R

Fairway Wood

Tom Wishon 949 MC 16.5* Fujikura Speeder 569-A

Hybrid  :cleveland-small: Hibore 22* Aldila VS Proto Blue

Irons  :ping-small: G series 5-P

Wedges :ping-small:Glide 54* SS / 60* TS - SCOR 53*

Putter     :nike-small: Nike Method 001 / P2 Reflex grip 35"

Ball

Master Grip Tour C4

Bag

Datrek DG Lite  

Link to comment
Share on other sites

Freckin Yankees.. nuff said

Go Indians!!  Major League!!!

We don’t stop playing the game because we get old; we get old because we stop playing the game.”

Link to comment
Share on other sites

Have you checked out the Mercedes GLC 300?  It really feels a lot like driving the E350, just a bit higher off the ground with a lot more room in the back.  Just picked one up before Labor Day for a long trip out East. (Still keeping the E350, though) ;)

Not as much room in the back as the wagon.  She's still looking though; might be awhile unless one of the gremlins gets really nasty.

  • Like 1

We don’t stop playing the game because we get old; we get old because we stop playing the game.”

Link to comment
Share on other sites

Go Indians!! Major League!!!

[emoji106][emoji106][emoji106] Indians! Browns on the other hand............

 

 

Sent from my iPad using MyGolfSpy

  • Like 1

Left Hand orientation

:taylormade-small:SIM 2 D Max with Fujikura Air Speeder Shaft 

Cobra King F-9  5 wood
:ping-small:  410  Hybrids 22*, 26*

Cobra Speed Zone 6-GP/Recoil ESX 460 F3 Shafts 

:titelist-small: SM7 54* Wedge

:ping-small: Glide 3.0  60* Wedge

:odyssey-small: O Works putter
:918457628_PrecisionPro:NX9-HD

:CaddyTek: - 4 Wheel 
:footjoy-small: - too many shoes to list and so many to buy

:1590477705_SunMountain: And  BAG Boy

Golf Balls: Snell MTB-X  And Vice Pro Plus 

2020 Official Tester :SuperSpeed: Beginning Driver Speed  - 78

2019 Official Tester :ping-small:  410 Driver

2018 Official Tester :wilson-small: C300

Link to comment
Share on other sites

Freckin Yankees.. nuff said

Sorry .. I'm from NY :-)

WITB of an "aspiring"  😉 play-ah ...
..Callaway Big Bertha B21 driver (Recoil ES 450/F3)
..Callaway Bertha Mini 1.5 (UST ProForce V2-HL 5/F3)
..Callaway Epic Max 5W (PX Cypher 50/5.0)
..Callaway Big Bertha 4H and 5H (both Recoil ZT9/F3)
..PXG 0211 6i-GW (Mitsubishi MMT 60/A) 
..Cleveland CBX2 54 and CBX 60 (Rotex graphite)
..EvnRoll ER5 or MLA XDream (Edel EAS 4.0 on the bench)
..all in a Datrek bag on an MGI Zip Navigator electric cart.

Forum Member tester for the ExPutt Putting Simulator (2020)

Link to comment
Share on other sites

Sorry .. I'm from NY :-)

Ok, Mets or Yankees fan. Ive been a fan forever, matter of fact, growing up I caught so Yogi was my idol

Oh also to add: parents almost named me Ryne, after Ryne Duren "the blind flame thrower

Link to comment
Share on other sites

My bum...that is all.

  • Like 1

In the bag:
Driver: :titelist-small: TSi2 Project X HZRDUS Smoke Black RDX 6.0
Hybrid: :Sub70: 939X 3 Hybrid Project X Even Flow Riptide 6.0

Hybrid: Maltby KE4 HDI 4 and 5 UST Recoil 660 F4
Irons: Maltby DBM Forged UST Recoil 660 F4
Wedge: :cleveland-small: Smartsole S

Wedge: SCOR4161 46° and 50° 
Putter :Sub70: Sycamore 005 Wide Blade
Bag: 
:Ogio: Alpha Convoy 514
Balls::Snell: MTB-X or Black

Cart: :CaddyTek: CaddyLite ONE Ver. 8


God Bless America🇺🇸, God save the Queen🇬🇧, God defend New Zealand🇳🇿 and thank Christ for Australia🇦🇺!

Link to comment
Share on other sites

My father-in-law bought a scanner from Harbor Freight for $15. We take the codes off the scanner and plug them into Google.

 

Never had an issue doing this and I feel certain it has saved us in countless wasted dollars and time.

Absolutely if that's all the scanner cost you. My friend took her car to a garage and they charged her $120 for an OBD II scan. She blew her top when I told her you can get a pretty decent one for that price.

 

Sent from my E6853 using MyGolfSpy mobile app

  • Like 1
Link to comment
Share on other sites

Well 7 plus years busting my ass for my company and building it to where it is now and today was effectively my last day there. Not really planned but knew there was a good chance I was going to be asked to move my family and uproot our lives...so I am taking door #2. No idea what my future will hold but for now I am at peace with my decision.

 

If only this happened in July so I could have played a heck of a lot more Golf than I did :)

 

 

Sent from my iPhone using MyGolfSpy

  • Like 6

WITB

:callaway-small: Epic Max LS 10.5* GD AD TP 6x

:callaway-small: Epic Speed 15* GD AD HD 7x

:callaway-small: Apex UW 17* Project X RDX Smoke Black 80 6.5

PXG 0317 22* KBS Proto 95x

PXG 0311 ST 5 -GW KBS Tour 130

PXG Sugar Daddy 54* & 58* TTDG TI S400

L.A.B. Golf Mezz.1 34"

Link to comment
Share on other sites

Well 7 plus years busting my ass for my company and building it to where it is now and today was effectively my last day there. Not really planned but knew there was a good chance I was going to be asked to move my family and uproot our lives...so I am taking door #2. No idea what my future will hold but for now I am at peace with my decision.

 

If only this happened in July so I could have played a heck of a lot more Golf than I did :)

 

 

Sent from my iPhone using MyGolfSpy

Best of luck in your new endeavor - with the labor market as tight as it is companies should be doing everything they can to retain employees.

 

 

Sent from my iPad using MyGolfSpy

  • Like 1

Left Hand orientation

:taylormade-small:SIM 2 D Max with Fujikura Air Speeder Shaft 

Cobra King F-9  5 wood
:ping-small:  410  Hybrids 22*, 26*

Cobra Speed Zone 6-GP/Recoil ESX 460 F3 Shafts 

:titelist-small: SM7 54* Wedge

:ping-small: Glide 3.0  60* Wedge

:odyssey-small: O Works putter
:918457628_PrecisionPro:NX9-HD

:CaddyTek: - 4 Wheel 
:footjoy-small: - too many shoes to list and so many to buy

:1590477705_SunMountain: And  BAG Boy

Golf Balls: Snell MTB-X  And Vice Pro Plus 

2020 Official Tester :SuperSpeed: Beginning Driver Speed  - 78

2019 Official Tester :ping-small:  410 Driver

2018 Official Tester :wilson-small: C300

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...