JohnBarry 119 Posted August 26, 2013 Share Posted August 26, 2013 Boz, you know me, always willing to help as some of your balls are my favorite even. Wow that sounds bad, but they are! Quote John Barry Bring the Funk, Back to Golf The Golfer's Trip Link to post Share on other sites
Stephen_Peszel 8 Posted August 26, 2013 Share Posted August 26, 2013 Funny, isn't it but at the Barclays a number of players hurt themselves with their excessive backspin that took the balls all the way off the green and into the bunker in some cases. Frankly if I actually get backspin I watch it in wonder and wonder what I did. I want something that is soft around the greens though, and stops after a good flop shot; I don't mind if it gets chewed up by the grooves, they all do. Hi Guys, thanks for the input so far,,,,,I am not building ball designs with excessive spin as I have my own thoughts on what drop and stop should be for most levels of golfers and the higher the partial wedge spin levels the greater the chance that distance control is compromised either in the air or on the ground. Lets see what happens with the Volvik trial MGS are running before I butt in with my gear, as it isn't right to chime in at this stage. Cheers, Boz Quote Post theft of my clubs and gear, I have all new:In the bags: ClicGear cart bag; Mizuno Carry Bag. Clic Gear 2.0 cart. Lamkin mid size grips on all. KZG VC-420 Driver 10.5 deg with 38 lb flex black NovaTech 6000 shaft. KZG Q 3 Wood 15 deg with 37 lb Fierce Full Force shaft silver KZG Q 5 Wood, 19 deg with 37 lb Fierce Full Force shaft silver KZG H370 Tour hybrid 22 deg with Silver NovaTech shaft 38 lbs KZG forged cavity back CBIII wedges AW -5 iron, bent 3 deg up, with silver 38lb graphite NovaTech shafts KZG 60 degree forged wedge NS shaft. Callaway X Jaw 64 degree wedge Odyssey Putter. Vision Golf Balls Test Pilot, Titleist ProV1x Open for sponsorship Link to post Share on other sites
W.J Bosley 49 Posted August 26, 2013 Author Share Posted August 26, 2013 Thanks Boys,,,, Quote Vision Golf Ball Concepts & Designs by The Atanak Co Australia (1980 - 2016) Link to post Share on other sites
JohnBarry 119 Posted August 28, 2013 Share Posted August 28, 2013 Boz, lost your e-mail in my great "computer crash" of 2013, can you e-mail me at johnb@cultapparelgroup.com Need to speak with you. Quote John Barry Bring the Funk, Back to Golf The Golfer's Trip Link to post Share on other sites
W.J Bosley 49 Posted September 8, 2013 Author Share Posted September 8, 2013 Plenty going on,,,,,,here is the first pack image for the ProSoft 808 Project. Quote Vision Golf Ball Concepts & Designs by The Atanak Co Australia (1980 - 2016) Link to post Share on other sites
fozcycle 11,703 Posted September 8, 2013 Share Posted September 8, 2013 Hey Boz, looks great........I remeber the 808 or Bob as we referred to them.....Great ball. Are you developing a softer version? Terrific. Let us know when they are available. Quote Driver: Tour Edge Exotics EXS w/Mitsubishi ck Blue regular shaft BACKUP DRIVER: Cobra F8 w/Mitsubishi ck Blue regular shaft Fairways: Cobra King F8 3W(14.5*) & 5W(18.5*) w/Mitsubishi ck Blue regular shaft Hybrids: Tour Edge CBX 119 4H(22*) with Project X Evenflo regular shaft Irons: Wilson Staff D7 5 - PW w/Recoil 460 regular shafts Wedges: Wilson D7 GW(50*) & SW(54*) w/Recoil 460 regular shafts; Cleveland RTX Zipcore(58*) w/True Temper Spinner Wedge steel shaft Putter: 33" Slotline SSi 693 mid mallet Bag: Cobra Ultralite Cart Bag(Peacoat Blue). Link to post Share on other sites
W.J Bosley 49 Posted September 8, 2013 Author Share Posted September 8, 2013 Hi Foz, the white version that I am preparing now can take on any ball in the non Tour level in regards to feel, what I have setup is a soft forgiving feel but without feeling doughy or sponge where you get no real feedback. Think NXT Tour S or RX330 S in particular. This version plays like the Zstar more than the Qstar but with a controlled amount of spin on partial wedges. The 2014 UVEE Yellow/ UVEE Orange and more importantly the UVEE White will be based on this structure as the feel is the last sticking point with many players who want to support my Vision designs and I hope you will see I have been able to achieve this whilst pushing the overall performance to the limits. Cheers, Boz Quote Vision Golf Ball Concepts & Designs by The Atanak Co Australia (1980 - 2016) Link to post Share on other sites
JohnBarry 119 Posted September 10, 2013 Share Posted September 10, 2013 CANT WAIT Quote John Barry Bring the Funk, Back to Golf The Golfer's Trip Link to post Share on other sites
wbealsd 1,063 Posted September 11, 2013 Share Posted September 11, 2013 Looking forward to trying these!! Quote What's In The Bag Driver Titleist 913 D2 10.5* (set to 9.75* / Neutral) 46" Paderson KINETIXX Kevlar Green - R Fairway Wood Tom Wishon 949 MC 16.5* Fujikura Speeder 569-A Hybrid Hibore 22* Aldila VS Proto Blue Irons G series 5-P Wedges Glide 54* SS / 60* TS - SCOR 53* Putter Nike Method 001 / P2 Reflex grip 35" Ball Master Grip Tour C4 Bag Datrek DG Lite Link to post Share on other sites
W.J Bosley 49 Posted September 24, 2013 Author Share Posted September 24, 2013 Hi Guys, Ok I have been given the green light to start testing my new GelSkin S-Type (Soft Spin) cover material. I will be using this on the X3 replacement design that you all know as the X-pert4 or X4,,,,due to the fact that this name plate doesn't really explain the ball the way I would like it to be understood by players I am moving to the model name ProType-888. The 888 badge was popular in testing and the description ties in with my RX330 competitor the ProSoft-808. I am doing a special TestPilot pack for Christmas that will include these new prototypes in their pre mass production specification to continue my player trials that should allow enough results and feedback to fine tune the 2014 designs. Talk more soon, Boz Quote Vision Golf Ball Concepts & Designs by The Atanak Co Australia (1980 - 2016) Link to post Share on other sites
SPY VIP GolfSpy MBP 2,279 Posted September 24, 2013 SPY VIP Share Posted September 24, 2013 Hi Guys, Ok I have been given the green light to start testing my new GelSkin S-Type (Soft Spin) cover material. I will be using this on the X3 replacement design that you all know as the X-pert4 or X4,,,,due to the fact that this name plate doesn't really explain the ball the way I would like it to be understood by players I am moving to the model name ProType-888. The 888 badge was popular in testing and the description ties in with my RX330 competitor the ProSoft-808. I am doing a special TestPilot pack for Christmas that will include these new prototypes in their pre mass production specification to continue my player trials that should allow enough results and feedback to fine tune the 2014 designs. Talk more soon, Boz This is great news Boz. Please keep us up to date and look forward to seeing what exciting things Vision has in store. Quote Yo #JustPlayBetter Follow @GolfSpyMBP Link to post Share on other sites
fozcycle 11,703 Posted September 24, 2013 Share Posted September 24, 2013 Hi Foz, the white version that I am preparing now can take on any ball in the non Tour level in regards to feel, what I have setup is a soft forgiving feel but without feeling doughy or sponge where you get no real feedback. Think NXT Tour S or RX330 S in particular. This version plays like the Zstar more than the Qstar but with a controlled amount of spin on partial wedges. The 2014 UVEE Yellow/ UVEE Orange and more importantly the UVEE White will be based on this structure as the feel is the last sticking point with many players who want to support my Vision designs and I hope you will see I have been able to achieve this whilst pushing the overall performance to the limits. Cheers, Boz That's Great Boz, I have tried the NXT Tour S and liked it........Looking forward to the next Vision Version! Quote Driver: Tour Edge Exotics EXS w/Mitsubishi ck Blue regular shaft BACKUP DRIVER: Cobra F8 w/Mitsubishi ck Blue regular shaft Fairways: Cobra King F8 3W(14.5*) & 5W(18.5*) w/Mitsubishi ck Blue regular shaft Hybrids: Tour Edge CBX 119 4H(22*) with Project X Evenflo regular shaft Irons: Wilson Staff D7 5 - PW w/Recoil 460 regular shafts Wedges: Wilson D7 GW(50*) & SW(54*) w/Recoil 460 regular shafts; Cleveland RTX Zipcore(58*) w/True Temper Spinner Wedge steel shaft Putter: 33" Slotline SSi 693 mid mallet Bag: Cobra Ultralite Cart Bag(Peacoat Blue). Link to post Share on other sites
JohnBarry 119 Posted September 25, 2013 Share Posted September 25, 2013 A special Christmas Boz package sounds like Santa is listening to us all, can't wait!! Quote John Barry Bring the Funk, Back to Golf The Golfer's Trip Link to post Share on other sites
Eat Sleep Golf 3 Posted October 17, 2013 Share Posted October 17, 2013 Great thread guys. I've really enjoyed reading all the input, comments and discussions revolving around this great brand. If you haven't yet seen it, earlier this week, Vision launched a North American crowdfunding campaign with several product offerings and Test Pilot Team packages. Have a look at: http://www.indiegogo.com/projects/vision-golf-balls I'd love to hear additional thoughts and feedback relating to the campaign. Cheers, Scott Quote Link to post Share on other sites
W.J Bosley 49 Posted October 17, 2013 Author Share Posted October 17, 2013 Hi Scott, great this is the better place to let the guys know,,,,if we were just looking at White balls I don't believe it would make sense to go to market in any market right now as there are just so many similar products but the UV StayBright Technology is unique and works better so I feel now is the right time to show the wider market what I have been doing,,,,,, Thanks again for the support, Boz Quote Vision Golf Ball Concepts & Designs by The Atanak Co Australia (1980 - 2016) Link to post Share on other sites
Eat Sleep Golf 3 Posted October 18, 2013 Share Posted October 18, 2013 Hi Scott, great this is the better place to let the guys know,,,,if we were just looking at White balls I don't believe it would make sense to go to market in any market right now as there are just so many similar products but the UV StayBright Technology is unique and works better so I feel now is the right time to show the wider market what I have been doing,,,,,, Thanks again for the support, Boz Thanks for the reply Boz! As you know, I'm a huge fan of the Vision brand and the product line. It's an exciting time to watch it gaining momentum in the North American market. The unique designs and focus on hi-visibility really helps your products stand out in what is otherwise a stagnant market segment. I just got back from 5 days in Myrtle Beach where the weather was nice but the sky was overcast the entire time... After seeing the Vision balls in play, and the increased visibility they provide, everyone I played with was begging for some of the UV yellow balls! Keep up the great work! Scott Quote Link to post Share on other sites
JohnBarry 119 Posted October 18, 2013 Share Posted October 18, 2013 They should be familiar with them in Myrtle Beach, I have been losing Vision Golf Balls on their courses for years!!! Quote John Barry Bring the Funk, Back to Golf The Golfer's Trip Link to post Share on other sites
W.J Bosley 49 Posted July 7, 2015 Author Share Posted July 7, 2015 New Vision balls for 2016,,,maybe USA/Canada for trials but China / Korea / Australia for sure cheers, Boz Quote Vision Golf Ball Concepts & Designs by The Atanak Co Australia (1980 - 2016) Link to post Share on other sites
W.J Bosley 49 Posted July 7, 2015 Author Share Posted July 7, 2015 Still working on the next generation of UVEE technology,,,,,,but here is some new Super White Gel Prototypes,,,,Cheers, Boz Quote Vision Golf Ball Concepts & Designs by The Atanak Co Australia (1980 - 2016) Link to post Share on other sites
revkev 22,150 Posted July 7, 2015 Share Posted July 7, 2015 Great to hear from you - you've obviously been a busy boy! These look sharp. 1 Quote Ping G410 - set at 12 degrees, fade setting - Fujikura Motore X R flex Ping G410 5-9 wood G30 6-PW - Aerotech FT 500 shafts SCOR 48,52,56,60 EVNRoll ER 5 Titleist Pro VIx optic yellow with revkev stamped on them Link to post Share on other sites
Recommended Posts
Our Sponsors
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.