Jump to content
TESTERS WANTED! ×

Need Help Determining Putter Tip


TSauer

Recommended Posts

So I have a Cleveland TFI 2135 1.0 that isn't being used. I would love to replace the current shaft with a black one to match the head. However, I'm unsure of what tip diameter size I need. PutterLounge has .355, .370, and Flare Tip.

 

I've looked online to try and find the size I need, but no answers. Can someone school me on this?

Driver:            :cobra-small: Aerojet 9* | Hzrdus Black Gen 4
Fairway:         :ping-small: G410 3W 13* | Alta CB 65
Hybrid:           :titleist-small: TS2 18* | Tensei AV Blue 70 S
Hybrid:           :ping-small: iCrossover 20* | Kai'li White 80
Irons:              :taylormade-small: P790 5-PW | DG S300
Wedges:         :titleist-small: Vokey SM9 | 52, 56, 60 | DG S200
Putter:            :L.A.B.: Link.1 | Accra x LAB

--- LAB Golf Link.1 Review ---

Link to comment
Share on other sites

It looks like the #1 uses a standard putter shaft, the tip goes inside the hosel, it should be a .370 tip from what I can tell in the photos.

How were you able to find the tip size? Please don't tell me it was an obvious answer and make me look dumb. Haha.

Driver:            :cobra-small: Aerojet 9* | Hzrdus Black Gen 4
Fairway:         :ping-small: G410 3W 13* | Alta CB 65
Hybrid:           :titleist-small: TS2 18* | Tensei AV Blue 70 S
Hybrid:           :ping-small: iCrossover 20* | Kai'li White 80
Irons:              :taylormade-small: P790 5-PW | DG S300
Wedges:         :titleist-small: Vokey SM9 | 52, 56, 60 | DG S200
Putter:            :L.A.B.: Link.1 | Accra x LAB

--- LAB Golf Link.1 Review ---

Link to comment
Share on other sites

Would this one work?

 

https://www.golfworks.com/fst-stepless-pro-black-matte-putter-shaft/p/FS0051/

 

I noticed someone put this in a 2135 8.0, I'm assuming it'd be the same thing.

Driver:            :cobra-small: Aerojet 9* | Hzrdus Black Gen 4
Fairway:         :ping-small: G410 3W 13* | Alta CB 65
Hybrid:           :titleist-small: TS2 18* | Tensei AV Blue 70 S
Hybrid:           :ping-small: iCrossover 20* | Kai'li White 80
Irons:              :taylormade-small: P790 5-PW | DG S300
Wedges:         :titleist-small: Vokey SM9 | 52, 56, 60 | DG S200
Putter:            :L.A.B.: Link.1 | Accra x LAB

--- LAB Golf Link.1 Review ---

Link to comment
Share on other sites

You can do use black shrink wrap to cover the stock shaft.

Here's a thread on it

 

https://forum.mygolfspy.com/topic/17997-diy-black-putter-shaft-or-other-colors/page-5?do=findComment&comment=282833

 

 

Sent from my iPhone using MyGolfSpy

What's in my  :cleveland-small: bag:

Driver :  :cobra-small: F9 10.5, Fujikura Speeder 757 TR 

Fairway  :cobra-small: F9 15.5° Aldila Rogue White 80X

Hybrid:  :cobra-small: King F7 18° KBS Tour PROTO Hybrid 95 S+

Irons:   :srixon-small: z585 4i - 6i,  z785 7i-PW, Nippon Modus 120X

Wedges:  :cleveland-small: CBX  50.11, 55.11, 60.10  TT DG S400 Black

Putter:  post-53756-150768041262.jpg Honey Badger 34" 

Ball:  :srixon-small: Q-Star Tour

 

Link to comment
Share on other sites

I have a 2135 8.0 and I had to call and chat with Cleveland to get the tip diameter and yes it is .370. I also put that shaft into my putter and it looks great, although it will change the feel on the firmer side so be prepared for that. IMG_4490.JPG

 

 

Sent from my iPhone using MyGolfSpy

  :srixon-small: Z765 (Project X HRZDUS Yellow 6.0 63g)

:srixon-small:  Z45 (Kuro Kage stiff flex 70g)

:srixon-small:  U65 20* (Miyazaki X-stiff)

:nike-small: VR Pro Combo 4-PW (Project X PXI 6.5)

:nike-small: Engage wedges 52* 58*

:wilson_staff_small: 8802

Link to comment
Share on other sites

So I have a Cleveland TFI 2135 1.0 that isn't being used. I would love to replace the current shaft with a black one to match the head. However, I'm unsure of what tip diameter size I need. PutterLounge has .355, .370, and Flare Tip.

 

I've looked online to try and find the size I need, but no answers. Can someone school me on this?

You might not need to change the shaft. I think Meyer posted something a while back where he performed a shaft mod with something and changed the shaft to black. It was pretty cool. Next time you're online send him a message.

My Sun Mountain bag currently includes:   TWGTLogo2.png.06c802075f4d211691d88895b3f34b75.png 771CSI 5i - PW and TWGTLogo2.png.06c802075f4d211691d88895b3f34b75.png PFC Micro Tour-c 52°, 56°, 60 wedges

                                                                               :755178188_TourEdge: EXS 10.5*, TWGTLogo2.png.06c802075f4d211691d88895b3f34b75.png 929-HS FW4 16.5* 

                                                                                :edel-golf-1: Willimette w/GolfPride Contour

 

Link to comment
Share on other sites

You can do use black shrink wrap to cover the stock shaft.

Here's a thread on it

 

https://forum.mygolfspy.com/topic/17997-diy-black-putter-shaft-or-other-colors/page-5?do=findComment&comment=282833

 

 

Sent from my iPhone using MyGolfSpy

I have done the heat shrink to another putter, but I didn't like the way it turned out.

Driver:            :cobra-small: Aerojet 9* | Hzrdus Black Gen 4
Fairway:         :ping-small: G410 3W 13* | Alta CB 65
Hybrid:           :titleist-small: TS2 18* | Tensei AV Blue 70 S
Hybrid:           :ping-small: iCrossover 20* | Kai'li White 80
Irons:              :taylormade-small: P790 5-PW | DG S300
Wedges:         :titleist-small: Vokey SM9 | 52, 56, 60 | DG S200
Putter:            :L.A.B.: Link.1 | Accra x LAB

--- LAB Golf Link.1 Review ---

Link to comment
Share on other sites

I have a 2135 8.0 and I had to call and chat with Cleveland to get the tip diameter and yes it is .370. I also put that shaft into my putter and it looks great, although it will change the feel on the firmer side so be prepared for that. attachicon.gifIMG_4490.JPG

 

 

Sent from my iPhone using MyGolfSpy

Is that the shaft from GolfWorks? And is it the regular black or the matte? It looks really good!

Driver:            :cobra-small: Aerojet 9* | Hzrdus Black Gen 4
Fairway:         :ping-small: G410 3W 13* | Alta CB 65
Hybrid:           :titleist-small: TS2 18* | Tensei AV Blue 70 S
Hybrid:           :ping-small: iCrossover 20* | Kai'li White 80
Irons:              :taylormade-small: P790 5-PW | DG S300
Wedges:         :titleist-small: Vokey SM9 | 52, 56, 60 | DG S200
Putter:            :L.A.B.: Link.1 | Accra x LAB

--- LAB Golf Link.1 Review ---

Link to comment
Share on other sites

Is that the shaft from GolfWorks? And is it the regular black or the matte? It looks really good!

Yeah this the shaft from golf works and I got it in matte to match the putter. I love the look.IMG_4493.JPGIMG_4492.JPG

 

 

Sent from my iPhone using MyGolfSpy

  :srixon-small: Z765 (Project X HRZDUS Yellow 6.0 63g)

:srixon-small:  Z45 (Kuro Kage stiff flex 70g)

:srixon-small:  U65 20* (Miyazaki X-stiff)

:nike-small: VR Pro Combo 4-PW (Project X PXI 6.5)

:nike-small: Engage wedges 52* 58*

:wilson_staff_small: 8802

Link to comment
Share on other sites

Yeah this the shaft from golf works and I got it in matte to match the putter. I love the look.attachicon.gifIMG_4493.JPGattachicon.gifIMG_4492.JPG

 

 

Sent from my iPhone using MyGolfSpy

Oh man, that's perfect! I now know what my next project is. Thank you!

Driver:            :cobra-small: Aerojet 9* | Hzrdus Black Gen 4
Fairway:         :ping-small: G410 3W 13* | Alta CB 65
Hybrid:           :titleist-small: TS2 18* | Tensei AV Blue 70 S
Hybrid:           :ping-small: iCrossover 20* | Kai'li White 80
Irons:              :taylormade-small: P790 5-PW | DG S300
Wedges:         :titleist-small: Vokey SM9 | 52, 56, 60 | DG S200
Putter:            :L.A.B.: Link.1 | Accra x LAB

--- LAB Golf Link.1 Review ---

Link to comment
Share on other sites

Yeah this the shaft from golf works and I got it in matte to match the putter. I love the look.attachicon.gifIMG_4493.JPGattachicon.gifIMG_4492.JPG

 

 

Sent from my iPhone using MyGolfSpy

Also just realized you were the one that left the review on their site, haha.

Driver:            :cobra-small: Aerojet 9* | Hzrdus Black Gen 4
Fairway:         :ping-small: G410 3W 13* | Alta CB 65
Hybrid:           :titleist-small: TS2 18* | Tensei AV Blue 70 S
Hybrid:           :ping-small: iCrossover 20* | Kai'li White 80
Irons:              :taylormade-small: P790 5-PW | DG S300
Wedges:         :titleist-small: Vokey SM9 | 52, 56, 60 | DG S200
Putter:            :L.A.B.: Link.1 | Accra x LAB

--- LAB Golf Link.1 Review ---

Link to comment
Share on other sites

Also just realized you were the one that left the review on their site, haha.

Haha gotta leave those reviews to help out the golf peeps!

 

 

Sent from my iPhone using MyGolfSpy

  :srixon-small: Z765 (Project X HRZDUS Yellow 6.0 63g)

:srixon-small:  Z45 (Kuro Kage stiff flex 70g)

:srixon-small:  U65 20* (Miyazaki X-stiff)

:nike-small: VR Pro Combo 4-PW (Project X PXI 6.5)

:nike-small: Engage wedges 52* 58*

:wilson_staff_small: 8802

Link to comment
Share on other sites

How were you able to find the tip size? Please don't tell me it was an obvious answer and make me look dumb. Haha.

It's not obvious, I've just changed shafts and things often. Basically, my thought ws that the shaft goes into the hosel, so you wouldn't need a flare tip since those are used for over hosel shafting, since .355 tip shafts are normally produced for specific irons and lengths, it would like not be used either, putter shafts that go into the hosel will most likely be a .370 shaft. You can use pretty much any .370 shaft, tip trim it to 8 or 9 iron length, and then when you butt trim to length it will Feel similar to a putter shaft.

Lefties are always in their Right Mind

Link to comment
Share on other sites

Got this projected started. Now I gotta wait for the shaft to come in and purchase some epoxy in the meantime. Any epoxy suggestions or pointers on inserting a new shaft?

 

3EAE35B4-7D3F-434C-9736-1DC91B9EEE5E.jpg

Driver:            :cobra-small: Aerojet 9* | Hzrdus Black Gen 4
Fairway:         :ping-small: G410 3W 13* | Alta CB 65
Hybrid:           :titleist-small: TS2 18* | Tensei AV Blue 70 S
Hybrid:           :ping-small: iCrossover 20* | Kai'li White 80
Irons:              :taylormade-small: P790 5-PW | DG S300
Wedges:         :titleist-small: Vokey SM9 | 52, 56, 60 | DG S200
Putter:            :L.A.B.: Link.1 | Accra x LAB

--- LAB Golf Link.1 Review ---

Link to comment
Share on other sites

You can just black out the current shaft

 

 

Sent from my iPhone using MyGolfSpy

I don't wanna use the heat shrink, I already order the new shaft. Plus, it's a pain in the arse removing a SuperStroke grip from the shaft. So, I'll probably find a putter head to use that shaft on.

Driver:            :cobra-small: Aerojet 9* | Hzrdus Black Gen 4
Fairway:         :ping-small: G410 3W 13* | Alta CB 65
Hybrid:           :titleist-small: TS2 18* | Tensei AV Blue 70 S
Hybrid:           :ping-small: iCrossover 20* | Kai'li White 80
Irons:              :taylormade-small: P790 5-PW | DG S300
Wedges:         :titleist-small: Vokey SM9 | 52, 56, 60 | DG S200
Putter:            :L.A.B.: Link.1 | Accra x LAB

--- LAB Golf Link.1 Review ---

Link to comment
Share on other sites

I have a putter head on the way and I am doing the same as you.  Trying to figure out what shaft to putt in the club.  probably going black,  but also considering TT Frequncy filtered.  Big questions I am working through are heavy/light and stepped/stepless.  Been reading opinions all over the internet.  Prabably avoiding the TT frequency shaft since it says is makes insert putters play too soft.  

 

Anyone around here have opinions on putter shaft weight or how steps impact the stroke?

Driver:  :ping-small: G400 Max 9* w/ KBS Tour Driven
Fairway: :titelist-small: TS3 15*  w/Project X Hzardous Smoke
Hybrids:  :titelist-small: 915H 21* w/KBS Tour Graphite Hybrid Prototype
                :titelist-small: 915H  24*  w/KBS Tour Graphite Hybrid Prototype        
Irons:      :honma:TR20V 6-11 w/Vizard TR20-85 Graphite
Wedge:  :titleist-small: 54/12D, 60/8M w/:Accra iWedge 90 Graphite
Putter:   :taylormade-small:TM-180

Testing:   SPGC_logo.jpg

Backups:  :odyssey-small: Milled Collection RSX 2, :seemore-small: mFGP2, :cameron-small: Futura 5W

Member:  MGS Hitsquad since 2017697979773_DSCN2368(Custom).JPG.a1a25f5e430d9eebae93c5d652cbd4b9.JPG

 

Link to comment
Share on other sites

  • 3 weeks later...

Just got this project finished, and I'm loving it. Went with a Lamkin Deep-Etched Full-Cord grip, it's perfect. Here are a few pictures.

IMG_9185.JPG

IMG_9187.JPG

IMG_9188.JPG

Driver:            :cobra-small: Aerojet 9* | Hzrdus Black Gen 4
Fairway:         :ping-small: G410 3W 13* | Alta CB 65
Hybrid:           :titleist-small: TS2 18* | Tensei AV Blue 70 S
Hybrid:           :ping-small: iCrossover 20* | Kai'li White 80
Irons:              :taylormade-small: P790 5-PW | DG S300
Wedges:         :titleist-small: Vokey SM9 | 52, 56, 60 | DG S200
Putter:            :L.A.B.: Link.1 | Accra x LAB

--- LAB Golf Link.1 Review ---

Link to comment
Share on other sites

Archived

This topic is now archived and is closed to further replies.

  • Recently Browsing

    • No registered users viewing this page.
×
×
  • Create New...