Jump to content

Recommended Posts

Our Sponsors

I've tried several times before with my M2 driver to remove the adaptor without melting the plastic ferrule to no avail. Anyone had any luck removing the adaptor in a way that the adaptor can be reused on a different shaft?

 

I've tried Vasoline, torches and heat guns. Never can get enough heat to loosen the epoxy without melting the attached plastic part at the bottom of the adaptor. Any advice?

Taylor Made M2 - KuroKage Silver TiNi 60g X

Titleist 917f2 15 deg - Rogue Max 75s

Taylor Made M4 - 19 deg - Tensei Blue 80 X

Mizuno MP-18 MMC Fli-Hi  (2 iron) - Project X 6.5

Mizuno MP-18 SC (3-6 iron) - Project X 6.5

Mizuno MP-18 (7-PW) - Project X 6.5

Vokey WW SM6 Raw 52.08 - Project X 6.5

Vokey WW SM7 Raw 56.10 S grind, 60.08 M grind

Scotty Cameron Studio Select Newport 2

Link to post
Share on other sites

I've tried several times before with my M2 driver to remove the adaptor without melting the plastic ferrule to no avail. Anyone had any luck removing the adaptor in a way that the adaptor can be reused on a different shaft?

 

I've tried Vasoline, torches and heat guns. Never can get enough heat to loosen the epoxy without melting the attached plastic part at the bottom of the adaptor. Any advice?

If you've got a shaft extractor and a good heat shield there's a chance, but it is slow work. Use a heat gun instead of a torch and direct heat to the tip instead of the sleeve. There's a good golfwrx thread if you Google your question.

 

Sent from my Nexus 6P using MyGolfSpy mobile app

:callaway-small: Rogue SZ 10.5 *NEW* Fujikura Pro Green 65 X

:callaway-small: Rogue 15 degree Evnflow Blue 6.5

Back in the Bag :srixon-small: Z765 4-G Nippon Modus 120 Stiff

:vokey-small: 54 and 60

 

:bobby-grace-1: Amazing Grace Ass Kicker

 

Link to post
Share on other sites

^^^^ what he said.  Shaft extractor is almost a must when pulling heads/adapters from graphite shafts while preserving the adapter 

In my :mizuno-small: BR-D4 Stand Bag

:ping-small: G410 LST 9* VA Nemesys 65X
:ping-small: G410 LST 14.5* Tour AD DI 7X
:titelist-small: 818 H2 20* Tour AD DI 85X
:mizuno-small: MP20 HMB 4 Tour AD 95X
:mizuno-small: JPX 919 Tour 5-PW Oban CT 115 X(-)
:titelist-small: Vokey SM7 50F - 54S - 59D
:scotty-small: Phantom X 5.5 (2021)
:titelist-small: ProV1
Link to post
Share on other sites

Heat shield paste and wrap with a wet paper towel. Use a heat gun and keep pressure on it. As soon as it moves remove the heat, push the adapter off and immediately toss in a cup of cold water to quench the heat

  • Like 1

In The Bag
Driver: TaylorMade M2 (2017) w/ Project X T1100 HZRDUS Handcrafted 65x 
Strong 3 wood: Taylormade M1 15* w/ ProjectX T1100 HZRDUS handcrafted 75x
3 Hybrid: Adams PRO 18* w/ KBS Tour Hybrid S flex tipped 1/2"
4 Hybrid: Adams PRO 20* (bent to 21*) w/ KBS Tour Hybrid S flex tipped 1/2"
4-AW: TaylorMade P770 w/ Dynamic Gold Tour Issue Black Onyx S400

SW: 56* Scratch Tour Dept(CC grooves) w/ Dynamic Gold Spinner
LW: 60* Scratch Tour Department (CC grooves) w/ Dynamic Gold Spinner
XW: 64* Cally XForged Vintage w/ DG X100 8 iron tiger stepped
Putter: Nike Method Prototype 006 at 34"

Have a ton of back-ups in all categories, but there are always 14 clubs in the bag that differ depending on the course and set-up. Bomb and gouge. Yes, I'm a club gigolo.

Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...