Who's Online 39 Members, 0 Anonymous, 186 Guests (See full list)
- M. Parsons
- GolfSpy STUDque
- Golf Dawg
- GolfSpy MPR
This review coincided with the National D7 Challenge that Wilson Staff ran through the first 3 months of the season. To be eligible for the testing, forum members had to go to a Wilson Demo Day or local golf store and demo the D7 iron and see how much distance they gained.
As a result the selected members received a full set of D7 irons. This testing is also a milestone for MGS of sorts as it marks the first official club test for our women members. So we're excited to have a couple of them chiming in on what we are sure will be some very helpful and insightful reviews.
The Testers are as follows:
@Steve2100 Stage 1 Stage 2
@Tarheelvolvo Stage 1 Stage 2
@JohnSmalls Stage 1 Stage 2
@GeekingGolf Stage 1 Stage 2
Our Two Female Reviewers
@GolfDorkette Stage 1 Stage 2
@artful_golfer Stage 1 Stage 2
In the golf club world, where most companies insist on renaming or launching a new name after one or two iterations of a club, to see a company stick with a name into the 4th generation....well that must say something about the winning formula they have. Below is a video from Cleveland Golf on it's RTX4 wedge.
Then we have four members of our forum who are in the process of testing these wedges to see how they perform for their games. See their initial thoughts in the Stage 1 posts below, and follow their on course and on range experiences with them in this thread over the next 4 weeks or so.
The Four Member Testers are:
@goaliewales14 Stage 1 Stage 2
@Apes44 Stage 1 Stage 2
@MDGolfHacker Stage 1 Stage 2
@Smellis745 Stage 1 Stage 2
Howdy! Looking forward to my fitting next week for the new T-Series irons. Currently gaming 7-9 AP2 and 5-6 AP3 and a 4 in the TMB.
Titleist usually gives their fitters a sheet with blend suggestions (and even loft adjustments recommendations). Has anyone seen this sheet yet? Has anyone been fitted for a blended set? If so, what is your setup?
By GolfSpy Dave
Introducing the UN series. A hybrid grip with the signature velvety sticky touch of NO1 Grip.
This grip combines a sticky, solid feel in the upper hand area, and a delicate softer feel in the lower hand area, which provides an unmatched sense of stability and confidence. UN series promotes light and consistent grip pressure, which leads to a smoother swing, improved distance, and control.
Available Round Material: Elastomer Weight: UN series 50g (±1g) UN Light 44g (±1g) Pink, Shocking pink Men's Standard
My Third Shot at NO1
It was way back in 2011 when I first ran a set of NO1 Model 48 grips through the old GolfSpy Dave review process. It’s fun to look back at my early reviews to see how the golf industry has changed over time. One of the coolest things about the Model 48 grips was that they came in lots of colors. Such a spectrum selection would not move the needle as much these days, but as many of you remember, there was a time not too long ago when your choice of grip color consisted of black or black.
I took my next spin with NO1 grips in 2015 when they released the Model 50 Pro grips. At the time, I considered the Model 50 Pro to be one of the best grips that I had ever put on a club. It had a great shape, tackiness, and overall feel in my hands. I could tell right away they it was also a durability upgrade over the Model 48. I really thought that the Model 50 Pro grips would last a while.
As it turns out, I was not wrong. I played last week with a friend who was using the set of irons that I had gripped with the NO1 Model 50 Pros, and those grips were still in use, and looking damn near perfect. As one who regrips about once a year, I was amazed that he still had those grips on from 2015. All he did was occasionally clean them with dish soap and water. Unbelievable.
And so today we take a look at a third model of NO1 grip, the newly released UN series. I’ve slapped them on my Srixons, and am ready to share with you what the UN is all about.
A New Decade of Dominance
Golf Pride’s New Decade Multi-Compound grips have impacted the golf grip industry perhaps more than any other grip. I'm going to go out on a ledge of craziness and call the NDMC the Anser of modern grips.
Yep, that just happened. Sorry Tour Velvet...
Keep the torches untorched for a second and hear me out. When we look at putter companies, nearly all of them make some kind of Anser variant. It’s really a necessity, as the consumer wants that head shape, and should a company want to sell putters, they had better provide the customer with what they want. Think about the upcoming Scotty Cameron Tel3 rerelease. You have two Anser Newport heads, and a cool flow-neck mallet. I’ll give you one guess as to why the Newports are there and not a Laguna and a Del Mar 2.
Like the Anser, Golf Pride’s NDMC grips have become iconic, and highly desirable to the playing public. Like the Anser with putter companies, grip companies have paid attention to this consumer trend, and now most companies feature some kind of NDMC-ish grip where the upper and lower portions of the grip feature different materials and textures. These new grips are typically not just copies, as like with the Anser situation, these companies are also taking the original New Decade design and putting their own spin on it.
“Adopting” and improving on a working design may be the most prevalent product plan in the golf industry, be it putters, drivers, gloves, or grips. Wheels get tweaked far more often than re-invented…
With all of that in mind, I bet you can guess the general design of NO1’s new UN series grip. Yep, you’ll find different tactile situations at the top and the bottom of the grip, and like the Anser making putter shops not named PING, NO1 has put their own spin on the design, perhaps even improving on the original concept.
A Tale of Two Textures
One thing that the UN series grip is not is a multi-compound grip. The entire grip is made out of the same elastomer material. Elastomer is rubber for those of you out there without Google.
What NO1 has done is make the UN grip more of a multi-texture grip, and in doing so, they were able to achieve the firmer upper/softer lower composition that we associate with the more traditional multi-compound grips.
Those of you who spent points for ranks in putter face milling knowledge will immediately get how NO1 has accomplished this feat. When a putter face is deep milled, the amount of metal that actually contacts the ball at impact is reduced. This interaction will be perceived by the person putting as a softer impact experience when compared to a putter without the deep milling.
When you look at the texture patterns on the NO1 UN series grip, you should notice that the texture on the lower section is far more aggressive than the top, with the holes being deeper and wider on the lower half.
Think again about the putter and the milling. If you have larger holes on the bottom section, you will actually have less rubber touching the (typically) right hand, and thus it will feel softer. Crazy parallel there, huh?
In addition to a less prolific texture pattern, NO1 has also added an additional layer of elastomer on the top section which increases overall firmness as well.
It’s grip wizardry. One material, but two different tactile experiences.
Playing The UN Series
I love sharing the technical side of these with you, but at $16 a grip, what you really need to know about is how they play. With that goal in mind, I went grips-ons with the Srixons and went to the course. While all of the following is, of course, subjective, I did have a few key observations worth sharing.
Comfy, Comfy, Comfy
I love the feel of these grips. As a point of reference, prior to installing these, my irons were gripped with Lamkin 3GEN Ace grips.
With that in mind, I definitely found the NO1 UN series to feel softer overall, with the lower region giving a nice bit of squish. It’s a welcome squish with these grips, at no point do they feel too soft. They are soft enough to mesh in with the fingers, but not so soft that you’d get waves of wiggle with the club.
The great thing about my game these days is that I get to take all kinds of shots from all places on the course. Admittedly, that’s not so great for scoring, but it is great for testing grips on a variety of shots. Under all conditions, these grips felt great and performed as needed.
Grip performance is absolutely a tough thing to measure. Outside of falling off the club, or spinning in the hand, it’s tough for a grip to have an immediate failure. In this situation, I measured subtle performance in two ways.
First, these did not promote finger damage like I will sometimes get with the 3GENs and even NDMC. No bandaids needed to play that second 18, just the usual Advil and alcohol.
Second, and most telling, is that I basically forgot that I was playing with new grips about two holes into the round. I don’t know if there is a higher compliment that I can give these grips than that. For me, they were so comfortable, and functional, that they just vanished into my subconscious while I played.
A grip that rubs roughly, or suddenly slips, is not a grip that you would ignore during play. The UN grips were totally un-obtrusive and un-der my radar during play.
Fancy Colors Rule
You have a bunch of choices when you are shopping for the UN Series grips. While the lower hand will likely be navy, you can get a number of bright colors on the top hand. Of the samples received, I really liked the light blue, and would probably game the white or yellow as well. I’m a colored grip guy. I’d actually like to see some of the more esoteric color combinations that NO1 has on their Series 48 and Series 50 grips. If these came in purple/white, I’d probably buy a case of them.
Should you prefer a more reserved grip palette, you can go with the mundane navy on navy combo, or the actually-very-badass all black design.
I’ve only had a few rounds and some range time with these, but they are wear-free so far. Hopefully, they hold up like the 50 Pro grips. I’ll circle back to this section over the next few months and add photos should any wear issues develop. For now, all seems solid.
Thumbs Up for UN
Overall, I’m quite impressed with these grips. They are able to give you that upper/lower hand tactile difference that you look for in a multi-compound grip, without using multiple compounds. Folks who play without a glove, but don’t like the chord roughness in typical multi-compounds should definitely check these out.
The vanish-from-consciousness nature of these grips was especially welcome. That’s one less thing for me to think about when I am playing. I don’t want to think about the alternator when I am driving, I just want the alternator to do its job under the hood while I drive.
The NO1 UN Series grips have been UN-believably good so far.
Lynx Golf announced it's return to the US Market earlier this year. To help spread the word, Lynx offered up 4 sets of it's Black Cat and 4 sets of it's Prowler VT irons to testers of tMYGolfSpy. These testers will be sharing their thoughts with you on everything regarding these irons.
They'll begin with a bio of themselves and their games so you can see which tester might most resemble your playing ability and some initial thoughts on the looks of the clubs fresh out of the boxes from the UK.
Over the next six weeks or so, they will be returning to the thread to share their thoughts and answer any specific questions you may have about the irons, so check back here regularly to see how they are performing for the testers.
Testers for the Black Cats are
@knightsofnii Stage 1 Stage 2
@JimNantzsToast Stage 1 Stage 2
@kardboard.kid Stage 1 Stage 2
@daviddvm Stage 1 Stage 2
Prowler VT Testers are:
@Jmikecpa Stage 1 Stage 2
@JudgeSmails Stage 1 Stage 2
@azstu324 Stage 1 Stage 2
@blackngold_blood Stage 1 Stage 2
Latest from the Blog
Happy Birthday Today!