Jump to content

DIY Scotty cameron restoration


tapoutdouble
 Share

Recommended Posts

What's the easiest way for someone, who's not very handy, to restore a scotty? I'd like to try black oxide to color the head and then use a paint to fill. Any suggestions or tips? It's a Scotty Cameroon studio Newport 2 mid slant.

 

 

Sent from my iPhone using MyGolfSpy

Link to comment
Share on other sites

I am assuming studio select which is a plated putter. The problem you will face is that you will most likely have to remove the plating to do a refinish. This would require some bead basting if some type. Doable but probably more work and expense for someone that just wants to do one putter. You could outsource the removal of the plating and then do a black oxide treatment. If you want to go that route you could check with powder coating places in your area to see if they can remove the plating for you.

 

Basically, From there you need to decide on matte or shiny and then prep the putter by sanding/polishing. Then apply black oxide. Finally do paintfill and cleanup

 

 

I know high level and more details can be provided. I think there are some threads on here or you could look on WRX where there is lots of explanations on refinishing. Big question mark is original finish to be able to black oxide

Driver:  :ping-small: G400 Max 9* w/ KBS Tour Driven
Fairway: :titelist-small: TS3 15* set  to 16.5* w/Project X Hzardous Smoke
Hybrids:  :titelist-small: 816H1 19* set at 18* w/KBS Tour Graphite Hybrid Prototype
                :titelist-small: 915H  21*  w/KBS Tour Graphite Hybrid Prototype
               :titelist-small: 915H 24*  w/KBS Tour Graphite Hybrid Prototype
Irons:      :honma:TR20V 6-11 w/Vizard TR20-85 Graphite
Wedge:  :callaway-small: 54-10S   :cleveland-small: 588  58-12
Putter:  :seemore-small: mFGP2

Backups:  :bobby-grace-1: 6330, :taylormade-small:TM-180, :odyssey-small: Milled Collection RSX 2, Bellum Winmore 787

 

Member:  MGS Hitsquad since 2017697979773_DSCN2368(Custom).JPG.a1a25f5e430d9eebae93c5d652cbd4b9.JPG

 

Link to comment
Share on other sites

The studio select isn't plated. It's stainless steel. Stainless steel will not take black oxide. You'd need to do a chemical blackener but it won't get deep black, more of a grey.

  • Like 1

In The Bag
Driver: TaylorMade M2 (2017) w/ Project X T1100 HZRDUS Handcrafted 65x 
Strong 3 wood: Taylormade M1 15* w/ ProjectX T1100 HZRDUS handcrafted 75x
3 Hybrid: Adams PRO 18* w/ KBS Tour Hybrid S flex tipped 1/2"
4 Hybrid: Adams PRO 20* (bent to 21*) w/ KBS Tour Hybrid S flex tipped 1/2"
4-AW: TaylorMade P770 w/ Dynamic Gold Tour Issue Black Onyx S400

SW: 56* Scratch Tour Dept(CC grooves) w/ Dynamic Gold Spinner
LW: 60* Scratch Tour Department (CC grooves) w/ Dynamic Gold Spinner
XW: 64* Cally XForged Vintage w/ DG X100 8 iron tiger stepped
Putter: Nike Method Prototype 006 at 34"

Have a ton of back-ups in all categories, but there are always 14 clubs in the bag that differ depending on the course and set-up. Bomb and gouge. Yes, I'm a club gigolo.

Link to comment
Share on other sites

The studio select isn't plated. It's stainless steel. Stainless steel will not take black oxide. You'd need to do a chemical blackener but it won't get deep black, more of a grey.

Thanks for the clarification did a quick search and misread.

 

For the OP, rookie blue is the expert on putter refinishing.

Driver:  :ping-small: G400 Max 9* w/ KBS Tour Driven
Fairway: :titelist-small: TS3 15* set  to 16.5* w/Project X Hzardous Smoke
Hybrids:  :titelist-small: 816H1 19* set at 18* w/KBS Tour Graphite Hybrid Prototype
                :titelist-small: 915H  21*  w/KBS Tour Graphite Hybrid Prototype
               :titelist-small: 915H 24*  w/KBS Tour Graphite Hybrid Prototype
Irons:      :honma:TR20V 6-11 w/Vizard TR20-85 Graphite
Wedge:  :callaway-small: 54-10S   :cleveland-small: 588  58-12
Putter:  :seemore-small: mFGP2

Backups:  :bobby-grace-1: 6330, :taylormade-small:TM-180, :odyssey-small: Milled Collection RSX 2, Bellum Winmore 787

 

Member:  MGS Hitsquad since 2017697979773_DSCN2368(Custom).JPG.a1a25f5e430d9eebae93c5d652cbd4b9.JPG

 

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

 Share

×
×
  • Create New...