Jump to content

Recommended Posts

Our Sponsors

What's the best method to select a shaft that's right for me. I just bought an M1 with a stiff shaft and I need a Regular flex. Not sure about launch angle. Swing speed is 88.  Typically hit the ball rather high. Carry is about 175 yds. Miss is typically right but occasionally snap hook tee shots.

I'd appreciate any fitting advice.

Share this post


Link to post
Share on other sites

unfortunately, it isn't a simple answer.   Fitting a shaft is about how the shaft actually performs with your swing.   Generally the best way is to try multiple shafts on a launch monitor and assess how the shaft works.  Keys things to look at are launch angle, spin, dispersion, etc.  


Driver:  :ping-small: G400 Max 9* with UST Proforce V2
Fairway: :titelist-small: TS3 15* set  to 16.5* w/Project X Hzardous Smoke
Hybrids:  :titelist-small: 816H1 19* set at 18* w/KBS Tour Graphite Hybrid Prototype
                :titelist-small: 915H  21*  w/KBS Tour Graphite Hybrid Prototype
               :titelist-small: 915H 24*  w/KBS Tour Graphite Hybrid Prototype
Irons:      :srixon-small: 765 6-AW with KBS Tour shafts
Wedge:  :cleveland-small: 588 54-14, 58-12
Putter:  :odyssey-small: Ten S      Backups:  :bobby-grace-1: 6330,   :EVNROLL: ER2.2,  

 

Member:  MGS Hitsquad since 2017697979773_DSCN2368(Custom).JPG.a1a25f5e430d9eebae93c5d652cbd4b9.JPG

 

Share this post


Link to post
Share on other sites

It's a pretty simple answer.  The best way is to find a competent fitter and go get fit.

  • Like 3

Driver: :callaway-logo-1: Epic SZ w/ VA Composites Raijin 65 04

3w: :taylormade-small:'16 M2 hl w/ Diamana D+ 82

5w: :cleveland-small: Launcher HB w/ HZRDUS Yellow

Hybrid: :cleveland-small: 22 deg. Launcher HB w/ HZRDUS Black

Irons: :ping-small: 5i-UW G700 w/ X100 soft stepped once

Wedges: :cleveland-small: 54 & 58 CBX w/ Nippon Modus 3 125

Putter: :odyssey-small: Red 7s

Share this post


Link to post
Share on other sites

It's a pretty simple answer.  The best way is to find a competent fitter and go get fit.

 

Ok,  so it is a simple answer.   Just not a simple answer for someone on this board to provide with the provided information   :)


Driver:  :ping-small: G400 Max 9* with UST Proforce V2
Fairway: :titelist-small: TS3 15* set  to 16.5* w/Project X Hzardous Smoke
Hybrids:  :titelist-small: 816H1 19* set at 18* w/KBS Tour Graphite Hybrid Prototype
                :titelist-small: 915H  21*  w/KBS Tour Graphite Hybrid Prototype
               :titelist-small: 915H 24*  w/KBS Tour Graphite Hybrid Prototype
Irons:      :srixon-small: 765 6-AW with KBS Tour shafts
Wedge:  :cleveland-small: 588 54-14, 58-12
Putter:  :odyssey-small: Ten S      Backups:  :bobby-grace-1: 6330,   :EVNROLL: ER2.2,  

 

Member:  MGS Hitsquad since 2017697979773_DSCN2368(Custom).JPG.a1a25f5e430d9eebae93c5d652cbd4b9.JPG

 

Share this post


Link to post
Share on other sites

Your reputable fitter should be the best route to getting the correct shot for you.

It's not simply a matter of flex - the correct length, weight and profile (eg "kick point") will be factors which determine how the club head is delivered to the ball with your swing. 

Unless you know shaft dynamics and the fitting process very well, guessing the correct shaft by yourself will be largely a case of trial and error on your part - expensive and time consuming on your part for the majority of cases.

The wiser customer gets fitted by a professional and usually avoids the subsequent whims to buy something different each month because they will usually have the best tool for the job the first time around. Trust me, it's cheaper in the long run and your scores will reflect this. You just have to resist the temptation of thinking there's short cut to better golf with zero effort - there isn't.

  • Like 3

Share this post


Link to post
Share on other sites

I should add that the best method to select the best shaft for you is basic common sense - but that usually goes out of the window when you walk into most golf stores lol

Share this post


Link to post
Share on other sites

What's the best method to select a shaft that's right for me. I just bought an M1 with a stiff shaft and I need a Regular flex. Not sure about launch angle. Swing speed is 88.  Typically hit the ball rather high. Carry is about 175 yds. Miss is typically right but occasionally snap hook tee shots.

I'd appreciate any fitting advice.

You can't get fit for a shaft here in the forum. It's physically impossible. Take the advice of the guys above. You'll thank them.

  • Like 1

My Sun Mountain bag currently includes:   TWGTLogo2.png.06c802075f4d211691d88895b3f34b75.png 771CSI 5i - PW and TWGTLogo2.png.06c802075f4d211691d88895b3f34b75.png PFC Micro Tour-c 52°, 56°, 60 wedges

                                                                               :755178188_TourEdge: EXS 10.5*, TWGTLogo2.png.06c802075f4d211691d88895b3f34b75.png 929-HS FW4 16.5* 

                                                                                :edel-golf-1: Willimette w/GolfPride Contour

 

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.


×
×
  • Create New...