Golf Club Stamping

[DonPintin 3]

Hi All,

 

I'm sure this has been talked about plenty of times before, but I have a question which I'm sure some experienced heads out there can help me out with.

 

I've been practicing golf club stamping and I am getting 'OK' at it, practice makes perfect I'm sure.

I have been using 5 mm stamps which i think are too big, so planning on buying some 3 mm ones, which i think will give a better result.

My question is, what depth stamps are available and what are best for this task? All i can seem to find are 1 mm depth, which might be OK, but i wanted to get opinions on it before i purchase them.

 

Thanks in advance.

 

DonPintin

[Kor.A.Door 5,838]

I've done very little myself, I've found that the 1/8 inch stamps work best, I've got 1/4 inch as well and they eally don't work at all. There is a video at Callaway where their custom guys shows stamping, and it's a pretty good watch. He talks about where he gets his stamps from, and demonstrates some stamping. There's guys on here that do this stuff a lot, be patient, one of them will answer with exactly what you need. I am going to keep my eye to this as well since I'm interested in doing more myself.

[TSauer 4,085]

Here is the link Kor.A.Door is talking about. It's a good watch, Anthony Taranto is one of the best.

 

http://cmp.callawaygolf.com/2017/06/09/watch-how-to-customize-your-own-wedges/

[JoshAndersonGolf 2,656]

Here is a link to the stamps I use. They are 3/16”. They work well. I have some old wedges that I practice on. Keys is to make sure you have the club secure. You have to make solid contact and most of all do not rush. Will it come out perfect no but that's part of the point.

 

https://m.lowes.com/pd/K-Tool-International-Number-and-Letter-Stamp-Set/50374284?cm_mmc=SCE_PLA_ONLY-_-ToolsAndHardware-_-SosAtg-PowerTools-_-50374284:K_Tool_International&CAWELAID=&kpid=50374284&CAGPSPN=pla&k_clickID=82ae641f-10be-41b5-a099-57aac4cb8d34&gclid=EAIaIQobChMIvuntgr392AIVg7fACh1yeQFoEAQYBiABEgKvMPD_BwE

 

 

 

Sent from my iPhone using MyGolfSpy

[Kor.A.Door 5,838]

Here is the link Kor.A.Door is talking about. It's a good watch, Anthony Taranto is one of the best.

 

http://cmp.callawaygolf.com/2017/06/09/watch-how-to-customize-your-own-wedges/

Thanks for posting. He makes it look so dang easy to do. I am trying to locate a large magnet like he uses, but I feel they are out of my price range to get one big enough.

[RookieBlue7 1,677]

Thanks for posting. He makes it look so dang easy to do. I am trying to locate a large magnet like he uses, but I feel they are out of my price range to get one big enough.

Junkyard microwave. Disassemble it and you'll have a big magnet that's powerful.

[Brian A 1,001]

Anyone have any advice on wedge stamping, just want my initials and some paint fill? Dont want to spend a fortune to do so.  

[GolfSpy MPR 9,501]

Definitely interested in this as well.

 

Sent from my LG-G5 using the MyGolfSpy mobile app.

[hckymeyer 6,234]

Find a friend with stamps and have them do it.

 

Buy a set of stamps and DIY.

 

See if any of the guys on here with stamps can help you out, but you'll probably pay in shipping what a set of stamps costs.

 

Honestly I'd just pick up a set of stamps and start practicing.  It's not super hard to do either.  I'd just recommend finding an old wedge to practice on first.

[GolfSpy MPR 9,501]

Anyone have any sets of stamps that they've had good success with?

[Rtracymog 708]

I tried some ball markers last year and it turned out pretty good. Tough to get everything to line up exactly and I had some issues trying to get the paint to stay and not smear. I know the letters were deep enough because the ball markers were soft, but it was a struggle for me. Any suggestions would help. I've got some old wedges that i plan on doing this to as well, so I'm following intently!

 

 

Sent from my iPhone using MyGolfSpy

[TSauer 4,085]

I bought these last year, but haven't done much work with them. Will hopefully be getting around to that this weekend or next. Just make sure you have the wedge, or whatever it is your stamping stable. I've seen people recommend a 5lb mallet to make it easy.

 

36 Piece 1/8" Letter Number Stamping Set https://www.amazon.com/dp/B006ZB9P4K/ref=cm_sw_r_cp_api_1qnDAbNNBXRZ6

[JTexGolfer 1,040]

I tape my clubs down to an anvil to keep them in place, then I put a strip of duct tape on the club and then lightly stamp what I think I want in the tape. If I like it then I have something there to help me recenter the stamp for some good solid strikes. If not I pull the tape and start over till I'm happy. Takes a little longer but some of these clubs are really hard metals and I had some bad ghosting when I first started. Getting better every time. Patience is the key.

[Kor.A.Door 5,838]

Junkyard microwave. Disassemble it and you'll have a big magnet that's powerful.

I will look into this.

[Kor.A.Door 5,838]

I will say, go with 1/8” size, any big won't stamp correctly, and 1/8” is bigger than you think on the wedge.

I am no expert, but you need to be able to keep the club head from moving while stamping. It's not difficult to do. It sucks when the head slips.

I bought a set of stamps at Harbor freight, for about 12 bucks. I also bought a 4 lb hammer. It can be done pretty inexpensive.

[DonPintin 3]

Cheers for the replies all

[DonPintin 3]

Thanks for posting. He makes it look so dang easy to do. I am trying to locate a large magnet like he uses, but I feel they are out of my price range to get one big enough.

 

Anthony Taranto is a dude. He's the reason I'm trying to do it myself after following him on twitter.

 

I got the sharpie oil based pens he talked about and did a pretty decent job on one of my wedges, just think the text looks larger than what he uses, but it doesnt mention depth (maybe 1mm is the only depth you can get??)

 

Also, that magnet thing he uses is great, been searching high and low for something similar but with no luck - I too will look into this junkyard microwave thing.

 

Cheers for the responses

[RookieBlue7 1,677]

I will look into this.

I have one I use at work. Was the biggest and most powerful magnet I could find for what I needed

[HAMMER217 10]

I tried stamping my Vokey and it was much harder than I expected. I used a clamp to secure it to my work bench and painters tape to keep the stamp in place, to no avail. I'm not sure whether it was because the wedge was pretty old, because it was cold, or if it was operator error, but I couldn't even stamp a single letter without some major ghosting. I just got the new SM7 Vokeys so maybe I'll give it another shot on the old wedge before I attempt it on the new ones. 

[jlukes 12,696]

I tried stamping my Vokey and it was much harder than I expected. I used a clamp to secure it to my work bench and painters tape to keep the stamp in place, to no avail. I'm not sure whether it was because the wedge was pretty old, because it was cold, or if it was operator error, but I couldn't even stamp a single letter without some major ghosting. I just got the new SM7 Vokeys so maybe I'll give it another shot on the old wedge before I attempt it on the new ones.

Haha I butchered the stamping on my Sm6s. No way I'm doing anything to the SM7s