DPattGolf Posted February 22, 2018 Share Posted February 22, 2018 I fairly new to interacting in the forums and I'm obviously not as connected in the industry as many of you are but I figured why not post this here and see what everyone thinks. Now this may have been previously mentioned (If so apologize for the double post) but I was getting some question answered by someone at Arccos and they mentioned that they have a new sensor set coming that would essentially open up the availability of Cobra Connect to everyone and not just Cobra users. The set would presumably replace the 14 screw sensors with 13 grips with specialized sensors (likely the same one used by Cobra) and 1 putter screw. Wish I had more solid evidence than just a conversation to share with everyone but its still a really cool possibility that I hope becomes a reality. * Staff Professional* Driver: Stealth Plus+ (7.25*) - Fujikura Ventus Black 6X Tipped 1" 3 Wood: Stealth Plus+ (14.25*) - Fujikura Ventus Blue 7x Tipped 1" Driving Iron: P790 UDI 2 iron - HZRDUS Smoke Black RDX 100 6.5 4 Iron: P790 - KBS C-Taper 130 X Irons (5-7) P7MC - KBS C-Taper 130 X Irons (8-P) P7MB - KBS C-Taper 130 X Wedges: MG3 Black 50.09 / 55.11 - KBS TOUR FLT 130 X 60* Wedge: High Toe Raw - KBS Tour 130 X Putter: Custom Black ER2 or Custom Black Del Monte Bag: FlexTech Stand Bag Glove: Tour Preferred Glove Ball: TP5X #11 RangeFinder: R1 Smart Rangefinder Instagram: @dpattgolf Link to comment Share on other sites More sharing options...
downlowkey Posted February 22, 2018 Share Posted February 22, 2018 Arccos is presumably suggesting that golfers lay out $300.00 every time their wrenches need to be re-gripped? No, thank you. ______S9-1 Pro D - Matrix Ozik XCON 6 S ______S9-1 Pro 15* - Matrix Ozik XCON 7 S ________3DX 17* - Matrix Ozik Altus Hybrid SG ______ICON Black 4-PW - KBS Tour V S __________588 RTG 49 RTX 52.10 56.12 - DG S400 ______Amazing Grace NYC Tour CS _______'19 TP5X (the preceding have all been gamer approved) "The most important shot in golf is the next one“ - Ben Hogan Link to comment Share on other sites More sharing options...
tony@CIC Posted February 22, 2018 Share Posted February 22, 2018 Arccos is presumably suggesting that golfers lay out $300.00 every time their wrenches need to be re-gripped? No, thank you. Those $$ are just insane. I replace my grips once a season so they would want me to replace with arccos grips every time when I could just screw in their sensors instead. No thanks. Sent from my iPad using MyGolfSpy Left Hand orientation SIM 2 D Max with Fujikura Air Speeder Shaft Cobra Radspeed 3W/RIptide Shaft 410 Hybrids 22*, 26* Cobra Speed Zone 6-GP/Recoil ESX 460 F3 Shafts SM7 54* Wedge Glide 3.0 60* Wedge O Works putter V3 NX9-HD - 4 Wheel EZGO TXT 48v cart - too many shoes to list and so many to buy And BAG Boy Golf Balls: Vice Pro Plus 2020 Official Tester Beginning Driver Speed - 78 2019 Official Tester 410 Driver 2018 Official Tester C300 Link to comment Share on other sites More sharing options...
hckymeyer Posted February 22, 2018 Share Posted February 22, 2018 I do think it's a cool idea. I think the goal of all these shot tracking systems is to become as inconspicuous as possible. A system that doesn't require my phone in my pocket, no tagging, and integrated in to the golf club is probably the holy grail. All that said I agree with downlowkey. I'd have to see what the cost adder is to have that integrated into the grip. My gut reaction is that it's going to be much higher than I'm willing to pay. Plus think about how many sku's of grips are out there. Between the different manufacturers, different models and different colors it's pretty mind boggling how many options there are. Plus it seems very wasteful to have to replace a working tag just because you need to replace a grip. Unless they can come up with some way of re-engineering the grip to make the tag removable it just seems like added cost without a huge benefit. Considering the first thing I do when I get a club is usually replace the grip with what I currently play, I don't see myself being swayed to purchase this type of thing. Driver: SLDR w/ Fujikura Ventus Black 3w: '16 M2 hl w/ Diamana D+ 82 5w: Launcher HB w/ HZRDUS Yellow Hybrid: 22 deg. Launcher HB w/ HZRDUS Black Irons: 5i - gap Launcher CBX w/ Nippon Modus 3 125 Wedges: 54 CBX & 58 Zipcore w/ Nippon Modus 3 125 Putter: Red 7s Link to comment Share on other sites More sharing options...
PlaidJacket Posted February 22, 2018 Share Posted February 22, 2018 I have one Cobra grip with the sensor. (came with a secondhand shaft I purchased) I thought about putting it on my game driver and playing around with it a few times. If I don't give the thing away later I might consider removing the sensor and seeing about sticking it onto another grip. Should work I guess? My Sun Mountain bag currently includes: 771CSI 5i - PW and PFC Micro Tour-c 52°, 56°, 60 wedges EXS 10.5*, 929-HS FW4 16.5* Willimette w/GolfPride Contour Link to comment Share on other sites More sharing options...
PlaidJacket Posted February 22, 2018 Share Posted February 22, 2018 To follow Meyer's post about the sensors. It wouldn't take any serious "engineering" at all to make the butt end of a grip receptive to holding a sensor. Just a small hollow space with a small lip to slip and secure the sensor under. Pretty sure a rookie engineer or CAD flunky has already designed this for Arccos. My Sun Mountain bag currently includes: 771CSI 5i - PW and PFC Micro Tour-c 52°, 56°, 60 wedges EXS 10.5*, 929-HS FW4 16.5* Willimette w/GolfPride Contour Link to comment Share on other sites More sharing options...
hckymeyer Posted February 22, 2018 Share Posted February 22, 2018 To follow Meyer's post about the sensors. It wouldn't take any serious "engineering" at all to make the butt end of a grip receptive to holding a sensor. Just a small hollow space with a small lip to slip and secure the sensor under. Pretty sure a rookie engineer or CAD flunky has already designed this for Arccos. I agree it wouldn't be hard, but the cost of re-tooling all your molds would have to be pretty high and I'm guessing the grip OEM is going to eat that, not Arccos. And either way it would mean we the consumer would be fronting the bill in the end. Until Arccos, Game Golf and Shot Scope all get together and make a standardized sensor design I don't see any grip OEM taking the leap of faith. And I see a standardized sensor happening right after all the club OEM's get together and make a standardized hosel adapter. Driver: SLDR w/ Fujikura Ventus Black 3w: '16 M2 hl w/ Diamana D+ 82 5w: Launcher HB w/ HZRDUS Yellow Hybrid: 22 deg. Launcher HB w/ HZRDUS Black Irons: 5i - gap Launcher CBX w/ Nippon Modus 3 125 Wedges: 54 CBX & 58 Zipcore w/ Nippon Modus 3 125 Putter: Red 7s Link to comment Share on other sites More sharing options...
PlaidJacket Posted February 22, 2018 Share Posted February 22, 2018 Until Arccos, Game Golf and Shot Scope all get together and make a standardized sensor design I don't see any grip OEM taking the leap of faith. And I see a standardized sensor happening right after all the club OEM's get together and make a standardized hosel adapter. can I also add credit card terminals? <_> My Sun Mountain bag currently includes: 771CSI 5i - PW and PFC Micro Tour-c 52°, 56°, 60 wedges EXS 10.5*, 929-HS FW4 16.5* Willimette w/GolfPride Contour Link to comment Share on other sites More sharing options...
STUDque Posted February 22, 2018 Share Posted February 22, 2018 This isn't necessarily for the new Arccos system but what if they made skinny sensors that could go underneath the grips? Like something that locks over (or inside) the butt of the shaft then allows you to slide your grip over it with minimal increase in thickness? That's the best of both worlds. I think Arccos is took a big risk aligning with Cobra so closely but it paid off big-time because Cobra has made some awesome clubs the last few generations that are finally getting the recognition they deserved. If they want to grow, it makes perfect sense to work a little harder on a set that can be used with any OEM. Sent from my iPhone using MyGolfSpy In my Pisa, riding on a 3.5+ G410+ EXS 5W King F7 Hy i500 5-GW Equalizer 56/60 Heppler Ketsch Link to comment Share on other sites More sharing options...
hckymeyer Posted February 23, 2018 Share Posted February 23, 2018 can I also add credit card terminals? <_> Not sure where you're trying to put your credit card, but mine has fit in any terminal I've ever tried to use. Driver: SLDR w/ Fujikura Ventus Black 3w: '16 M2 hl w/ Diamana D+ 82 5w: Launcher HB w/ HZRDUS Yellow Hybrid: 22 deg. Launcher HB w/ HZRDUS Black Irons: 5i - gap Launcher CBX w/ Nippon Modus 3 125 Wedges: 54 CBX & 58 Zipcore w/ Nippon Modus 3 125 Putter: Red 7s Link to comment Share on other sites More sharing options...
hckymeyer Posted February 23, 2018 Share Posted February 23, 2018 This isn't necessarily for the new Arccos system but what if they made skinny sensors that could go underneath the grips? Like something that locks over (or inside) the butt of the shaft then allows you to slide your grip over it with minimal increase in thickness? That's the best of both worlds. I think Arccos is took a big risk aligning with Cobra so closely but it paid off big-time because Cobra has made some awesome clubs the last few generations that are finally getting the recognition they deserved. If they want to grow, it makes perfect sense to work a little harder on a set that can be used with any OEM. Sent from my iPhone using MyGolfSpy That's definitely a solution I would like better, but then you run in to someone who doesn't install with air having to remove grips to use Arccos. Actually that's one of my gripes with the embedded sensors like Cobra uses too. I'm assuming it blocks the air hole so you can't install them with a compressor anymore. Driver: SLDR w/ Fujikura Ventus Black 3w: '16 M2 hl w/ Diamana D+ 82 5w: Launcher HB w/ HZRDUS Yellow Hybrid: 22 deg. Launcher HB w/ HZRDUS Black Irons: 5i - gap Launcher CBX w/ Nippon Modus 3 125 Wedges: 54 CBX & 58 Zipcore w/ Nippon Modus 3 125 Putter: Red 7s Link to comment Share on other sites More sharing options...
HardcoreLooper Posted February 23, 2018 Share Posted February 23, 2018 It looks like Lamkin is making several of their grips in models that will accommodate the Cobra Connect-style Arccos sensor. But for right now, it looks like you can only get the grips through Cobra. https://www.cobragolf.com/cobra-connect-grips https://www.cobragolf.com/tryconnect Yes, it does look like you can pop the sensors out and put them into a different grip with the hole to accommodate the sensor. $10/grip is too much for a REL, though. I'd love to see Arccos sell the in-grip style themselves, not just on Cobra clubs. I wonder if you can roll your own by buying a bunch of "replacement" sensors. What's in the bag: Driver - F8 - Aldila NV Blue 60 ( S ) 3 Wood (13.5*) - 980F 4 Wood (18*) - F8 - Aldila NV Blue 60 ( S ) 3 Hybrid (19*) - RBZ 4i - PW - D7 Forged - Recoil 760 ( S ) 52* - CBX 58* - CBX Full Face 2 Putter - Craz-e Bag - 2.5 (Blue) Ball - AVX Instagram - @hardcorelooper Twitter - @meovino Facebook - mike.eovino Link to comment Share on other sites More sharing options...
Rtracymog Posted February 23, 2018 Share Posted February 23, 2018 We were told by our rep that you could buy the cobra grips with arccos for $7.50 a pop. Don't know if that is only for Cobra clubs, but that's what we were told. Sent from my iPhone using MyGolfSpy Cortex w/MGS Motore X F1 7X tipped 1" F5 17 degree hybrid w/Rogue Black 85X C300 Forged 3-5 w/C-Taper 130X FG Tour V6 5-6 w/C-Taper 130X Staff Model Blade 7-PW w/C-Taper 130X RTX4 52, 56, 60 w/S400 Tour Issue ER7 Link to comment Share on other sites More sharing options...
TSauer Posted February 23, 2018 Share Posted February 23, 2018 $7.50 for a smart grip is a pretty good price. Seems like it'd hurt Arccos' profitability though, as you'd be able to buy an entire set for just under $100 (not including putter sensor) versus the Arccos hardware itself for $250. Granted you wouldn't be able to use whatever grips you want. Driver: Aerojet 9* | Hzrdus Black Gen 4 Fairway: G410 3W 13* | Alta CB 65 Hybrid: TS2 18* | Tensei AV Blue 70 S Hybrid: iCrossover 20* | Kai'li White 80 Irons: P790 5-PW | DG S300 Wedges: Vokey SM9 | 52, 56, 60 | DG S200 Putter: Link.1 | Accra x LAB --- LAB Golf Link.1 Review --- Link to comment Share on other sites More sharing options...
chemclub Posted February 23, 2018 Share Posted February 23, 2018 Arccos will replace any defective sensors due to battery failure for $5 a piece (if after their warranty period). Assume, at most, that an arccos grip would be "cost of grip" + $5. That is premium but not completely outrageous. Plus, I would imagine that arccos price would come in considerably lower than that. I also wouldn't be surprised if they take the cobra or game golf approach which means you keep your sensor and would be cheaper still. https://mygolfspy.com/game-golf-releases-smart-grips-with-golf-pride/ Bag: Bennington Quiet Organizer 9-Lite (link) Cart: 3.5+ Driver: F9 speedback, Accra iWood Woods: Sonartec GS Tour 14*, Fujikura Six S DI: T-MB 2 iron, KBS Tour-V 120 X, Irons: PP-9003SN 4-GW, Nippon 1150GH Stiff Wedges: 1957 K-grind SW, LW, Nippon 1150GH Stiff Putter: EXO Indianapolis (link) Ball: MTB Link to comment Share on other sites More sharing options...
mooremikea Posted February 23, 2018 Share Posted February 23, 2018 I have the second generation Arccos sensors and like the way the system currently works. Any grip on the market works with the sensors. An integrated grip would limit what grips I can use. Sent from my iPhone using MyGolfSpy Driver - Ping G410 Plus 10.5 - Ping Tour 65 Stiff 4 Wood - Callaway Rogue - Project X Evenflow blue 6.0 Hybrids - Titleist 818 H2 - 3(c-1) and 4(c-4) - Tensei CK Blue 70 stiff Irons - Callaway Apex CF 16 5-AW - True Temper XP 95 Steel Stiff Wedges - Ping Glide 54 SS, 58 TS Putter - Edel e1 Torque balanced Indianapolis 5.5 Index Link to comment Share on other sites More sharing options...
franks62591 Posted March 15, 2018 Share Posted March 15, 2018 That's definitely a solution I would like better, but then you run in to someone who doesn't install with air having to remove grips to use Arccos. Actually that's one of my gripes with the embedded sensors like Cobra uses too. I'm assuming it blocks the air hole so you can't install them with a compressor anymore. The sensors can be easily removed and there is a small hole on top of the grip that allows the grip to be installed with air. I just did it with my Ping driver. Link to comment Share on other sites More sharing options...
TBT Posted March 22, 2018 Share Posted March 22, 2018 I think the analytics these things give are incredibly valuable and I do think something like this is the wave of the future but as others have said they have to find a way to bring it to the masses at a price point that everyone can afford, spending $300 every time you regrup your clubs is not going to cut it. Now if Arccos were to come out with some sort of trade up program where they sent you a new set of grips with sensors installed for the cost of the grips if you already own their smart grips and you returned the old ones to them or something to that effect....not sure how it would work, but I could see some sort of subscription program where you get a new set of grips with sensors once a year to install on your clubs for “X†number of dollars. XR Driver Matrix Ozik 8m3 Black Tie Shaft King F7 3W UST Mamiya Chrome Elements 7F4 Shaft King F7 5W UST Mamiya Chrome Elements 7F4 Shaft King F7 4 Hybrid Graphite Designs Tour AD-HY 95 Shaft PXG 0211 DC 5-PW Mitsubishi MMT 80 Shafts RTX ZIPCORE 50*,54*,58* UST Mamiya Recoil 95 Shafts Metal X Milled #7 with SuperStroke 2.0 grip MTB Twitter: @timldotson Instagram: timldotson Facebook: TimDotson Link to comment Share on other sites More sharing options...
DPattGolf Posted March 22, 2018 Author Share Posted March 22, 2018 Sensors could be removed from the old grip and replaced into new grips just like Cobra Connect can. You wouldn't need to be buying a new sensor if ur grip has just worn out. Only cost when re-gripping would be the price of whatever grip u had chosen. I think the analytics these things give are incredibly valuable and I do think something like this is the wave of the future but as others have said they have to find a way to bring it to the masses at a price point that everyone can afford, spending $300 every time you regrup your clubs is not going to cut it. Now if Arccos were to come out with some sort of trade up program where they sent you a new set of grips with sensors installed for the cost of the grips if you already own their smart grips and you returned the old ones to them or something to that effect....not sure how it would work, but I could see some sort of subscription program where you get a new set of grips with sensors once a year to install on your clubs for “X†number of dollars. * Staff Professional* Driver: Stealth Plus+ (7.25*) - Fujikura Ventus Black 6X Tipped 1" 3 Wood: Stealth Plus+ (14.25*) - Fujikura Ventus Blue 7x Tipped 1" Driving Iron: P790 UDI 2 iron - HZRDUS Smoke Black RDX 100 6.5 4 Iron: P790 - KBS C-Taper 130 X Irons (5-7) P7MC - KBS C-Taper 130 X Irons (8-P) P7MB - KBS C-Taper 130 X Wedges: MG3 Black 50.09 / 55.11 - KBS TOUR FLT 130 X 60* Wedge: High Toe Raw - KBS Tour 130 X Putter: Custom Black ER2 or Custom Black Del Monte Bag: FlexTech Stand Bag Glove: Tour Preferred Glove Ball: TP5X #11 RangeFinder: R1 Smart Rangefinder Instagram: @dpattgolf Link to comment Share on other sites More sharing options...
Wtwilkes Posted March 22, 2018 Share Posted March 22, 2018 I think it would be more important for Arccos to release the caddy function to work throughout each hole instead of just off the tee. If they can get it work and work really well. I'd spend money on regular Arccos enabled grips. Sent from my iPhone using MyGolfSpy Link to comment Share on other sites More sharing options...
DPattGolf Posted March 22, 2018 Author Share Posted March 22, 2018 That is going to be very difficult to do because the "throughout the hole" part requires knowing exactly where the pin is on every green. As far as I know I don't believe there is any GPS on the market that is capable of doing that with possibly doing a download before each round at the course your playing. At the same time you are relying heavily on the course to post an accurate placement of the pins every day. On top of that though it still wont be able to assess your lie to provide a good recommendation. Kinda of the reason it only does it from the tee is because that is the only time your guaranteed a perfect lie every time. I think it would be more important for Arccos to release the caddy function to work throughout each hole instead of just off the tee. If they can get it work and work really well. I'd spend money on regular Arccos enabled grips.Sent from my iPhone using MyGolfSpy * Staff Professional* Driver: Stealth Plus+ (7.25*) - Fujikura Ventus Black 6X Tipped 1" 3 Wood: Stealth Plus+ (14.25*) - Fujikura Ventus Blue 7x Tipped 1" Driving Iron: P790 UDI 2 iron - HZRDUS Smoke Black RDX 100 6.5 4 Iron: P790 - KBS C-Taper 130 X Irons (5-7) P7MC - KBS C-Taper 130 X Irons (8-P) P7MB - KBS C-Taper 130 X Wedges: MG3 Black 50.09 / 55.11 - KBS TOUR FLT 130 X 60* Wedge: High Toe Raw - KBS Tour 130 X Putter: Custom Black ER2 or Custom Black Del Monte Bag: FlexTech Stand Bag Glove: Tour Preferred Glove Ball: TP5X #11 RangeFinder: R1 Smart Rangefinder Instagram: @dpattgolf Link to comment Share on other sites More sharing options...
Wtwilkes Posted March 22, 2018 Share Posted March 22, 2018 I agree that there is a reason why they only give distance from tee; however, knowing that your best score opportunity is based on percentages it would be really nice to know my percent are of hitting the green based on any location of any hole. (You can set the location of the pin) If the program can identify rough/fairway/green, based on a satellite image the it ought to be able to calculate accuracy accordingly. I think it's totally possible and because of the inadequacies of being an AI and not able to physically analyze lies, and not physically present caddie the players shot competency isn't at all diminished and still very relevant. It would be as if your partially incorporating Decade golf course management. Totally possible. That is going to be very difficult to do because the "throughout the hole" part requires knowing exactly where the pin is on every green. As far as I know I don't believe there is any GPS on the market that is capable of doing that with possibly doing a download before each round at the course your playing. At the same time you are relying heavily on the course to post an accurate placement of the pins every day. On top of that though it still wont be able to assess your lie to provide a good recommendation. Kinda of the reason it only does it from the tee is because that is the only time your guaranteed a perfect lie every time.Sent from my iPhone using MyGolfSpy Link to comment Share on other sites More sharing options...
Wtwilkes Posted April 15, 2018 Share Posted April 15, 2018 Another awesome update from Arccos. Starting in late May, a series 2 or 3 Apple Watch could be used to track all shots without keeping the iPhone in the front pocket. Also, around the same time, we are releasing the caddie 2.0 update for club recommendations after the tee. When this comes out, you can tap caddie at any location on the course and it will provide a club recommendation, however this will only be available on the iPhone screen for the time being. Sent from my iPhone using MyGolfSpy Link to comment Share on other sites More sharing options...
puttingpirate Posted April 16, 2018 Share Posted April 16, 2018 Another awesome update from Arccos. Starting in late May, a series 2 or 3 Apple Watch could be used to track all shots without keeping the iPhone in the front pocket. Also, around the same time, we are releasing the caddie 2.0 update for club recommendations after the tee. When this comes out, you can tap caddie at any location on the course and it will provide a club recommendation, however this will only be available on the iPhone screen for the time being. Sent from my iPhone using MyGolfSpy FINALLY! Any news anywhere online about it? Link to comment Share on other sites More sharing options...
puttingpirate Posted April 16, 2018 Share Posted April 16, 2018 Sensors could be removed from the old grip and replaced into new grips just like Cobra Connect can. You wouldn't need to be buying a new sensor if ur grip has just worn out. Only cost when re-gripping would be the price of whatever grip u had chosen. Thats the one. Hope that golf pride will make some grips too as I cant go back to normal after my MCC+4s Link to comment Share on other sites More sharing options...
MDGolfHacker Posted April 16, 2018 Share Posted April 16, 2018 .. however this will only be available on the iPhone screen for the time being. Sent from my iPhone using MyGolfSpy â˜¹ï¸ Any idea when the Android version will bow its head? MDGolfHacker TSssWhat's In This Lefty's Bag? Driver: TSR2 11° Project X HZRDUS Black 4G 60g 5.5 Flex Fairway Woods: F8 3W Project X Even Flow Blue 75g shaft Fairway Woods: Hybrid: TSR2 18° Graphite Design Tour AD DI-85 Shaft Irons: 2021 T200's 4-GW AMT RED shafts Regular Flex Wedge: Tour Satin RTX 4 Wedges in 52° and 56° 2 Dot Putter: Gray Matter TDP 2.2 32.75" Bag: Three 5 Ball: PRO V1 / Z*Star RangeFinder: In search of new range finder Social Media: Facebook: MD Golfhacker Twitter: @mdgolfhacker Instagram: mdgolfhacker Link to comment Share on other sites More sharing options...
Rtracymog Posted April 16, 2018 Share Posted April 16, 2018 Thats the one. Hope that golf pride will make some grips too as I cant go back to normal after my MCC+4sGolf pride is working on getting grips done with the sensors, but I know they are behind Lamkin and back ordered for a while. Sent from my iPhone using MyGolfSpy Cortex w/MGS Motore X F1 7X tipped 1" F5 17 degree hybrid w/Rogue Black 85X C300 Forged 3-5 w/C-Taper 130X FG Tour V6 5-6 w/C-Taper 130X Staff Model Blade 7-PW w/C-Taper 130X RTX4 52, 56, 60 w/S400 Tour Issue ER7 Link to comment Share on other sites More sharing options...
MarcKilgore Posted April 18, 2018 Share Posted April 18, 2018 Another awesome update from Arccos. Starting in late May, a series 2 or 3 Apple Watch could be used to track all shots without keeping the iPhone in the front pocket. Also, around the same time, we are releasing the caddie 2.0 update for club recommendations after the tee. When this comes out, you can tap caddie at any location on the course and it will provide a club recommendation, however this will only be available on the iPhone screen for the time being. Sent from my iPhone using MyGolfSpy That may get me to buy it finally. I'll keep my eyes out. Thanks for the info! GBB Epic 10.5° - Recoil ES 450 regular mini 1.5 14° - Recoil ES 450 regular XR OS 16 Hybrid (3-5) - Fubuki AT 55/60 regular shafts Apex (6-PW) - Recoil 65 F3 regular shafts 1°flat MD4 Tour Chrome wedges (50W/54S/58C) - S200 1°flat Futura X 34" - Superstroke Slim 3.0 Link to comment Share on other sites More sharing options...
Peterpc2828 Posted April 18, 2018 Share Posted April 18, 2018 Just came across this not too bad on price point and an option for replacing grips too bad they didn't do this in collaboration with a grip OEM like golf pride. https://www.arccossmartgrips.com Sent from my iPhone using MyGolfSpy Link to comment Share on other sites More sharing options...
MDGolfHacker Posted April 18, 2018 Share Posted April 18, 2018 Just a quick point, you don't need to buy grips with the arccos sensors already built in. The arccos 360 have screw in sensors to your existing grips with a few caveats. The sensors are transferable to new grips of your choice, just unscrew them and re-screw them back into the new grips after you install them. MDGolfHacker TSssWhat's In This Lefty's Bag? Driver: TSR2 11° Project X HZRDUS Black 4G 60g 5.5 Flex Fairway Woods: F8 3W Project X Even Flow Blue 75g shaft Fairway Woods: Hybrid: TSR2 18° Graphite Design Tour AD DI-85 Shaft Irons: 2021 T200's 4-GW AMT RED shafts Regular Flex Wedge: Tour Satin RTX 4 Wedges in 52° and 56° 2 Dot Putter: Gray Matter TDP 2.2 32.75" Bag: Three 5 Ball: PRO V1 / Z*Star RangeFinder: In search of new range finder Social Media: Facebook: MD Golfhacker Twitter: @mdgolfhacker Instagram: mdgolfhacker Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.