Jump to content
GolfSpy Barbajo

TESTERS ANNOUNCED: Wilson Staff C300/C300 Forged Irons

Recommended Posts

Mike / Indiana 

Ping i E1 - Ping AWT 2.0 stiff shafts 5 - PW

7

C300 Forged

 

In the past couple years the Wilson lineup has been received really well.  The C300 forged irons look great.  Using my Arccos data from last year could make an interesting comparison between my current set and the C300 forged irons.  

Share this post


Link to post
Share on other sites

 

(4) TESTERS WANTED!!

attachicon.gifBanner.jpg

 

WILSON STAFF C300/C300 FORGED IRONS

 

Gotta say gang, we're really excited to bring this one to you. There's been more buzz this spring about the Wilson Staff C300 and C300 Forged irons on these pages than any other Wilson offering that I can remember, and for good reason. They do represent one of the more intriguing iron releases of 2018.

 

Both irons fall into the Game Improvement category, with the C300 offering more distance and forgiveness and the C300 Forged offering a more compact frame, bit more pop than a better player's cavity back and all the forged goodness you could possibly want.

 

attachicon.gifWilson-C300-irons-1-1563.jpg

TESTERS WANTED:

 

We're looking for four of you to do that voodoo that you do and give these things a good MyGolfSpy Forum going over. We need two avid golfers to test and review (and keep) a set of the C300's, and two more to do the same thing with the C300 Forged.

 

As always, we want to make sure you're ready to tackle the challenge of being a MyGolfSpy tester. You'll be asked to spend a solid two months working with these irons on both the practice range and on the course. You'll also be asked to write a two stage review (we'll provide you with a template) and provide your fellow Forum members with a detailed, thoughtful and - most importantly - honest evaluation of the C300's.

 

This review opportunity is open to any avid golfer/dedicated reviewer in the US, Canada or the UK.

 

attachicon.gifWilson-C300-Forged-irons-8-1627 (1).jpg

How To Apply:

 

If you want to test and review (and keep, did we mention that?) a set of C300's, please apply in THIS FORUM ONLY (applying in the blog won't do you any good, okay?). In this thread, please tell us the following:

 

Your first name/home state or province

Your current iron set/shaft combo

Your current handicap

Your review preference - C300 or C300 Forged

 

attachicon.gifWilson-C300-irons-9-1585.jpg

We'll be selecting two of you to review the C300's and two others to review the C300 Forged. We'll be announcing the testers in this thread next week, so make sure to check back!

 

Thanks, and best of luck!!!

Dave, Tacoma Wa, Miura MB-001 irons, 300 forged is choice. 12 hndc

 

Sent from my HTC6545LVW using Tapatalk

Share this post


Link to post
Share on other sites

Jim - Colorado


Current Set - Callaway XHot Pro /  Project X 5.5


Current Handicap - 17.5


Review Preference - C300 or C300 Forged

Share this post


Link to post
Share on other sites
Your first name/home state or province: Tim, Minnesota

 

Your current iron set/shaft combo: Callaway Big Bertha 3-PW regular shaft

 

Your current handicap: 11.5

 

Your review preference - Either but if I need to pick one I'll go with C300

 

Thanks!

Share this post


Link to post
Share on other sites

Don Rindfleisch Jacksonville Fl.

Mizuno M23 irons with stock graphite shafts

10 handicap

70 years old. Have been a golfer since age 9.

C300

Share this post


Link to post
Share on other sites

Frank / Minnesota

 

Mizuno Hot Metal

 

Nippon Pro Modus3 Tour 105

 

10 handicap

 

C300 Forged

 

Played a set of W/Staff Forged and would love to test these against my Mizunos for feel, etc.

Share this post


Link to post
Share on other sites

danpt1up---Parkersburg,WV    Mizuno JPX900 forged--KBS 95tour R   hcp: 1.9  C300 forged

Share this post


Link to post
Share on other sites

Aaron Ojard

Frederick MD

9.8 index

Srixon Z565/765 combo 4-PW C-taper lite Stiff.  +1/2 inch and 2 degrees upright.

 

Share this post


Link to post
Share on other sites

Brett - Colorado

 

Nike Vapor Pro 3-PW w/ Dynamic Gold S300

 

Handicap - 2.0

 

Prefer C300 Forged

 

Thanks for the opportunity!

Share this post


Link to post
Share on other sites

Wally, NV

 

Mizuno JPX 900 Hot Metal Regular

NS PRO 950 GH shaft

 

HDCP 14

 

C300

 

 

Sent from my iPhone using MyGolfSpy

Share this post


Link to post
Share on other sites

Ryan/ California


Taylormade RocketBallz / RBZ Steel


+14.5


Prefer C300 Forged


Share this post


Link to post
Share on other sites

Great opportunity here! I always think of Wilson as the sleeper clubs.

 

Dave from Michigan

718 AP1/ NS Pro 950GH R-Flex 4-PW, AP3 / NS Pro 950GH 48* wedge

20

C300 Forged

Share this post


Link to post
Share on other sites

Allan from Kankakee,IL

 

Nike slingshot irons (2012) true temper dynamic gold x flex shafts.

 

20 hndcp

 

C300

Share this post


Link to post
Share on other sites

Todd Ritchie

 

Pennsylvania

 

Greasy Big Bertha/UST Recoil graphite shafts. R flex

 

Handicap 12

 

C300

 

 

Sent from my iPhone using MyGolfSpy

Share this post


Link to post
Share on other sites

Gary, South Carolina

 

Current Set: Taylormade P770 4-PW, Modus 3 Tour 120-stiff

 

Handicap: 3

 

Review Preference: C300 Forged

Share this post


Link to post
Share on other sites

HI!!

 

Jason / Alberta

Gauge design irons, Project X 5.5 steel shaft

11.5 handicap

C300

Share this post


Link to post
Share on other sites
Guest
This topic is now closed to further replies.

  • Daily Deals

  • Sponsors

  • Our Sponsors

     
     
     

  • Member Statistics

    • Total Members
      81,946
    • Most Online
      2,247

    Newest Member
    lpsevill
    Joined
  • Similar Content

    • By JohnSmalls
      Wilson Staff D7 Challenge/Demo. Never been to one, so why not start here?? 
    • By 03trdblack
      Had a chance to go to Golf Galaxy over the weekend and they had the Wilson Cortex on display.  Tried out the 9* head w/ the Fujikura Atmos Blue which on paper is the shaft that should suit me the best.  I tend to do well with shafts that have a stiffer butt and tip but a softer middle.  
      From a looks perspective, the Cortex is very attractive and on a retail rack it commands the appeal of a premium club.  The face is nice and deep and at address the size and shape is just perfect to my eye.  It is very compact looking and I love the black carbon fiber look.  Some of the quality fades away as you get into the adjustment of the weights but I'll come back to that in a moment.  I was very excited to hit this club after standing over it at address and seeing the shape of the head and Wilson nailed the look behind the ball.
      As I started to hit the club the feel and sound was pretty good.  Based on the initial reviews I had read online I somewhat expected the sound to be a little deeper or less metallic but it still have remnants of that weird sound that Wilson drivers have had in the past.  I've had the F5 and the Triton and have also hit the C300 and all of them have a very strange metallic noise that I can only associate with the brand.  Not sure what they are doing when they manufacture heads but the Cortex still had a little of that sound.  The sound is very good though, especially compared to their older drivers and of course the Triton.  I was also hitting indoors so the sound may change out on the course.  Still was pleased with the sound and feel.
      The Atmos Blue feels very smooth and maybe just a tad loose in stiff flex.  I was swinging between 101-105 on this particular day according to the monitor and felt the Atmos Blue could be tipped about 1" and would feel perfect.  The shots coming off the face didn't look like they were rocketing off but ballspeed was average.  I'd say it was producing numbers that were in the lower end of most of the drivers I've hit.  Again, nothing bad but nothing really great either.
      The biggest problem I had with the driver was trying to get the spin down.  I could not get spin to stay consistently below the 2800 and 3200 RPM range.  I hit a few low on the face and the spin shot way up to 3500+.  I was hitting a little bit of a fade so I swapped the 8 gram toe weight into the heel and put the 2 gram weight into the toe.  This didn't really seem to make any noticeable difference in my shot shape or any with my spin numbers.  I then moved the sliding weight all the way forward to try and see if I could drop the spin any and like the heel/toe weights, nothing really changed.  The feel of the club changed for the worse and my spin numbers seemed to actually go up.  The head definitely feels better with the weight towards the middle and back of the head.  Since the slider didn't do anything for my spin numbers, I moved it back towards the rear as the shots felt so much better.
      There was a Wilson C300 9* driver on the used rack and I was able to hit it side by side with the Cortex.  It had the stock Fuji 58 Pro stiff shaft in it which wasn't exactly the same but I immediately dropped my spin by over 1000 RPM's.  I could barely get the C300 above the 2000 RPM mark and the highest spin I got was 2400 on a shot that over-faded to the right.  I immediately picked up 7-12 yards of carry due to the lower spin.  Ballspeed numbers between the Cortex and C300 were identical.  I did hit the C300 lower and found it harder to launch as high which also gave me a lot more roll after landing.  I launched the C300 around 9-11 degrees and the Cortex around 12-13 degrees.  
      I didn't have a chance to try the Atmos Black but historically speaking the black's bend profile doesn't work for me.  Since no store will ever have any other shafts to try I doubt I'll have the chance to find another combination that might bring the spin down.  My theory is that the center of gravity of this head is not as low as it could be.  Even though the crown is carbon fiber to remove weight, most of the sole is also which removes that weight from the heavier bottom of the club.  You have weight freed up for the heel/toe weights and the slider but nothing low and back to pull that COG back down.  The carbon fiber inserts in the sole are also raised up into the head which means that the structure that holds them is also up higher in the head.  I can't wait to see where this club sits on the MyGolfSpy Center of Gravity chart!
      I mentioned earlier that there was some quality issues as I adjusted the weights.  First off, the screw heads for all the weights are very shallow, shallower than any other weight screws I've adjusted, and the wrench slipped out of them very easily as I was trying to tighten them.  I PROMISE these screws will get stripped very quickly and easily if you adjust the weights a few times and Wilson's wrenches feel like they have a lot of torque to get them to click.  I also noticed that the heel and toe weights don't sit flush with the sole of the driver so it looks like you don't have them tightened all the way down.  Not really a huge deal but worth mentioning.  Also the heel/toe weight screws are very skinny and kind of hard to get started in the hole.  I dropped the damn 2 gram weight (which is just plastic) 3-4 times trying to line it up and get the screw started with the wrench.  It took forever and was slightly frustrating.  The shaft adapter also looks like the same adapter Wilson has been using which means that the hosel is plastic.  This means it will be impossible to reshaft because it will melt and the ferrules are not available without buying the entire tip.  Taylormade used to do this but at least you could get replacement plastic ferrules that had the loft measurements once you destroyed the original.  This means that even trying to find another shaft on my own would be impossible!
      All in all I enjoyed hitting the club even though I could never get it to work for me.  The spin was too high and the options to try and get a better fit just don't exist.  Really too bad because the head is absolutely beautiful and perfect looking at address.
         




    • By GolfSpy Barbajo
      Some sweet new bags released today by Wilson Golf.  Whaddya guys think?
       
       
      WILSON UNVEILS NEW EXO GOLF BAG FAMILY
       
      The new Wilson Staff eXo cart and carry line delivers a higher level of organization through its wide open top and geometric pocket designs.
       
      CHICAGO, September 24th , 2018 – Wilson has officially announced the 2019 line of eXo carry and eXo cart bags. Designed with optimal club space and ergonomic pockets, eXo offers a wide range of storage options for golfers who enjoy easy access to their equipment while walking or riding during their round.
       
      The five-way 10' x 7.5' top of the eXo carry bag incorporates five large dividers which allow for easy club organization and accessibility. With six functional storage pockets, the new carry bag provides golfers ample storage space and convenience access to the essentials during a round on the course.
       
      “The organization and design of each pocket on the eXo carry and cart line make things effortless for golfers,” said Jean-Pierre Degembe, Global Product Director. “We went to great lengths to meet the needs of the everyday golfer, who enjoys the game without the hassle of searching or misplacing items inside their bags.”
       
      The lightweight eXo carry bagweighs in at 5.1lb/2.3 kg, features a non-skid base which rests flat on the ground and has integrated stand legs completing the self-standing design for greater stability around the golf course. The bag also offers a 2-in- one self-balancing four-point double strap system for carrying comfort.
       
      Designed for the keen carrier, the eXo carry bag integrates 3D air flow padded straps and a 3D air flow hip/low back pad to keep golfers cool in warmer conditions.
       
      Additional features include an umbrella and glove holders, a towel ring and rain hood for inclement weather.
       
      The eXo cart bag features a new 14-way 11' x 9' top with 14 full-length dividers with an enlarged putter well to accommodate oversized grips. A new base which features a trolley anchor, which fits easily on a cart and securely on a trolley.
       
      Eight functional pockets provide smooth access to belongings, which includes two “Dry- tech” pockets, two full-size garment spaces and three front accessories pockets. The cart bag also showcases one large cooler pocket. The umbrella and glove holder, tee holders, towel ring, rain hood and 3D foam padded strap complete the list of additional bag features.

      Both eXo carry and eXo cart bags are available in four stylish colour schemes: Blue/Royal/Yellow, Black/Black/Orange, Navy/White/Red and Red/White/Red.
       
      The eXo family will be available starting Monday, Spetember 24.
       
      Price Details:
      eXo Carry: $159.99 eXo Cart: $179.99
       












    • By Chadlius88
      Like your typical beginner golfer, I selected my first balls based on the fact that I was likely to lose a lot of them. So for my first round I grabbed 2 boxes of Nitro distance balls at Wally World for 5 bucks per dozen. Yup, lost most of ‘em. But at least I realized pretty quickly that balls sure do make a difference. So I tested several balls as I went along, as my game improved, so did my ball selection until I finally ended up choosing the Srixon Z Star, which is my current gamer, and has been since the middle of last year.
       
      Enter the new Wilson Staff Duo Soft Spin (SSP), promising extra spin around the green and a super soft feel. As a die hard Wilson Staff fan (see my signature for the proof) I just had to give these balls a shot. They are a 3 piece ball with an Ionomer cover.
       
      My initial thoughts are all positive, I think Wilson Staff has created a fantastic ball at a great price point. However, they definitely aren't for everyone, and here's why:
       
      That super soft feel part, holy moly. The balls are only 40 compression, so when you hit ‘em good, you definitely get a rubbery feedback, so if you don't like that sort of a feel, you'll hate these balls. I just so happen to like it; and around the greens it actually provides me with great feedback and improves my touch, but we'll get to that in a sec.
       
      Off the tee on hole 1 at the oaks in Somersworth NH, I hit a 253 yard bomb with my 3 wood. The ball went dead straight over the bunkers that cross the fairway, the ball went high enough that my friends and I lost it in the sky and never saw it down. But as I pulled up I saw that my ball had almost rolled through the fairway but stopped about a foot short, leaving me a lob wedge into the par 4 for my second. Don't get too excited, I ended up 3 putting for a bogie. But this leads me well into the next part.
       
      On approach shots, I had no trouble getting the ball to stop quickly on a course that in notorious for ridiculously fast greens. On hole 11, a par 5 I had another lob wedge into a green with the pin at the front of the green. I caught the fringe and the ball checked up less than a foot from the pin for a tap in birdie.
       
      The ball provided plenty of spin around the green. I had multiple chips that I felt I hit way too hard but the ball checked up quick enough to keep me 10 feet or less from the pin. And the feel was fantastic, I could really tell if I had hit the ball with the right touch.
       
      Off the putter was great as well. I did some of my best putting ever during my first round with this ball. 35 putts, when I average in the 40s on a normal day. The ball felt soft but borderline solid off the putter face with a nice quiet sound, no clicking from this ball.
       
      This ball will definitely be staying in my bag for a while for further testing. But so far I am a huge fan. Plus, now I can say I play all Wilson everythang. Check back for updates.




  • Recent Topics

  • Latest from the Blog

  • Happy Birthday Today!

×
×
  • Create New...