Jump to content
DPattGolf

New Players Distance Iron

Recommended Posts

Our Sponsors

For those interested in the Players Distance category, Golfworks' Maltby line has just released their first option to the category in the TS-2 Forged. To me the design looks a bit similar to the Cobra Forged Tec Black with it's small cavity and with each head selling for $49.99 it seems like a potentially great lower priced option. Also of note, it sounds like a Blade version, like the P790, is in the works and hopefully will become available sometime this summer.

 

Here is the overview of the TS-2 directly from Golfworks.com

 

Overview

 

The Maltby TS-2 forged irons were designed to enhance playability and distance typically not found in a true forged iron design. Utilizing the most advanced 5 step forging process available, the ST-2 irons feature a hollow 3 piece construction consisting of a thin, 2mm 1025C forged face and 1025C body with an internal tungsten weight positioned low and towards the toe for precise center of gravity locations throughout the set. The #4 iron thru #9 also feature an internal cavity behind the whole club face that is filled with dense polymer to enhance feel and boost the deflection of the thin carbon steel face at impact.

 

Features:

  • True Forged from 1025C Carbon Steel using the most advanced 5 step forging process available
  • Hollow polymer injection filled 3 piece construction
  • Forged titanium face and body with internal tungsten toe weighting to ensure the horizontal cg location is positioned in the center of the club face
  • Injected Polymer produces exceptional sound and feel
  • Thin, forged titanium face increases ball speeds for increased distance
  • CNC milled face ensures face flatness for more consistency
  • Multi-Groove technology places more CNC milled square grooves on the face for improved consistency, trajectory and spin
  • Attractive and durable nickel chrome finish protects the club and enhances feel
  • Progressive offsets to help square the face at impact in the long irons and improve alignment in the short irons.
  • Progressive sole angle (bounce), modern tour leading edge grind and 4 way radius sole provides the optimum turf interaction from a variety of turf conditions.
  • Modern lofts, combined with the optimal vertical cg locations, optimizes trajectory and distance.
  • Universal hosel accepts both .370" parallel tip and .355" taper tip iron shafts.
  • Recommended Ferrule - MA0300

 

MA0294specs.jpg

 

 

I will also apologize now for the small images of the clubs.

TS2.1.jpg

TS2.2.jpg

TS2.3.jpg

TS2.4.jpg

  • Like 2

Driver:  :titelist-small: TS3 (8.5*) - Mitsubishi Diamana D+ White 70X , 1" short & tipped 1", 4 extra grams of head weight

3 Wood: :titelist-small: TS3 (14.25*) - Mitsubishi Diamana D+ White 80X, 2 extra grams of head weight

Driving Iron: :titelist-small: U500 2 iron - HZRDUS Smoke (X)

Irons (4-6) :titelist-small: T100S - KBS C-Taper X-Stiff

Irons (7-P) :titelist-small: 620 MB - KBS C-Taper X Stiff

Wedges: QAJzq7h.jpg SM7 Jet Black 50.F.12 / 55.S.11 / 60.M.08 - X100

Putter: 5WoCG8Y.jpgBlack ER2 (Finish Courtesy of NorCal Putters) - :P2-grips-logo: Aware Tour

Bag:  :titelist-small: Hybrid 14

Glove:  Under Armour Strikeskin Tour

Ball: :titelist-small: ProV1 Yellow #3

RangeFinder: :918457628_PrecisionPro: NX7 Pro

Instagram: @dpattgolf

CURRENTLY TESTING THE HONMA TR20 DRIVER

Share this post


Link to post
Share on other sites

Those have some pretty hot lofts for a forged players type iron. Maltby does design some quality stuff though. Personally even though they have a "universal hosel" I would go with a 370 shaft because there are so many different tuning options with a 370 versus a 355 shaft unless you went with a set of flighted and tuned Rifle shafts


Driver Homna  G1- X Stock Homna Regular shaft

4 wood Adams Tight Lies 

20* Hybrid Adams Boxer Ozik Matrix R shaft

24* Hybrid Adams A 10-OS Pro Launch Red R

Irons 5 thru PW 1980 Macgregor VIP Hogan Apex #2 shafts

SW- Macgregor LRA 56* S-400

Putter 1997 Santa Fe rusty as heck

 

 

 

Share this post


Link to post
Share on other sites

Those have some pretty hot lofts for a forged players type iron. Maltby does design some quality stuff though. Personally even though they have a "universal hosel" I would go with a 370 shaft because there are so many different tuning options with a 370 versus a 355 shaft unless you went with a set of flighted and tuned Rifle shafts

Lofts are right in line with other clubs in this category of iron. 


Driver:  :titelist-small: TS3 (8.5*) - Mitsubishi Diamana D+ White 70X , 1" short & tipped 1", 4 extra grams of head weight

3 Wood: :titelist-small: TS3 (14.25*) - Mitsubishi Diamana D+ White 80X, 2 extra grams of head weight

Driving Iron: :titelist-small: U500 2 iron - HZRDUS Smoke (X)

Irons (4-6) :titelist-small: T100S - KBS C-Taper X-Stiff

Irons (7-P) :titelist-small: 620 MB - KBS C-Taper X Stiff

Wedges: QAJzq7h.jpg SM7 Jet Black 50.F.12 / 55.S.11 / 60.M.08 - X100

Putter: 5WoCG8Y.jpgBlack ER2 (Finish Courtesy of NorCal Putters) - :P2-grips-logo: Aware Tour

Bag:  :titelist-small: Hybrid 14

Glove:  Under Armour Strikeskin Tour

Ball: :titelist-small: ProV1 Yellow #3

RangeFinder: :918457628_PrecisionPro: NX7 Pro

Instagram: @dpattgolf

CURRENTLY TESTING THE HONMA TR20 DRIVER

Share this post


Link to post
Share on other sites

I have always known Maltby produces some very good products. And I am sure these will perform very well, but just not a fan of the looks. 


In my bag:

Driver: :honma: TR20 460 9.5* Vizard TR20 60X

Wood: :mizuno-small: ST200 TS Dimana D+PLUS Limited Edition 70X

Hybrids: :mizuno-small: CLK 19* Tensei CK Pro Blue 80TX

Irons: :honma: TW 747 Rose Proto 4-PW Modus Tour 120X

Wedges: :honma: TW-W4 52*, 56*, and 60*Modus Tour 125 Wedge 

Putter: :seemore-small: Nashville Z1C 34"

 Ball: :bridgestone-small: Tour B X

Share this post


Link to post
Share on other sites

Those have some pretty hot lofts for a forged players type iron. Maltby does design some quality stuff though. Personally even though they have a "universal hosel" I would go with a 370 shaft because there are so many different tuning options with a 370 versus a 355 shaft unless you went with a set of flighted and tuned Rifle shafts

Boy no kidding! Makes the lofts on my Wishons play like retro 60's. No wonder I seem to be losing distance. Or perhaps everyone is gaining? LOL

  • Like 1

My Sun Mountain bag currently includes:   TWGTLogo2.png.06c802075f4d211691d88895b3f34b75.png 771CSI 5i - PW and TWGTLogo2.png.06c802075f4d211691d88895b3f34b75.png PFC Micro Tour-c 52°, 56°, 60 wedges

                                                                               :755178188_TourEdge: EXS 10.5*, TWGTLogo2.png.06c802075f4d211691d88895b3f34b75.png 929-HS FW4 16.5* 

                                                                                :edel-golf-1: Willimette w/GolfPride Contour

 

Share this post


Link to post
Share on other sites

Boy no kidding! Makes the lofts on my Wishons play like retro 60's. No wonder I seem to be losing distance. Or perhaps everyone is gaining? LOL

My wishon clubs are 10 to 15 yards shorter than the Callaway GI clubs I had before. I don't mind being shorter I do like the advantage of consistent ball flight though.

 

Sent from my SM-G950U using Tapatalk

  • Like 1

Share this post


Link to post
Share on other sites

Looks a poor man's version of TaylorMade's RSI TP


In my :mizuno-small: BR-D4 Stand Bag

:ping-small: G410 LST Ping 9* LST VA Nemesys 65FIVE
:ping-small: G410 LST 14.5* VA Vylyn 75FIVE
:titelist-small: 818 H2 20* Tour AD DI 85X
:mizuno-small: MP20 HMB 4 Tour AD 95X
:mizuno-small: JPX 919 Tour 5-PW Oban CT 115 X(-)
:titelist-small: Vokey SM7 49 F - 54 S - 59 D
:mizuno-small: M Craft II
:bridgestone-small: Tour B X
 
SuperSpeed Forum Tester
Initial Driver Speed on Provided Monitor: 109 MPH
 

Share this post


Link to post
Share on other sites

Have a 6 iron head waiting at the house. Look forward to testing this against the PTM and the MMB

 

Sent from my SM-G892A using Tapatalk

  • Like 1

Share this post


Link to post
Share on other sites

That is one thick top line.

  • Like 1

:ping-small:                      400 Driver (8*)                      UST ATTAS Punch 6S

:cobra-small:               F6 Baffler (16*)                      Matrix Red Tie 65Q4

:titelist-small:                        816 H1 Hybrid (21*,23*)        Diamana S+ Blue 82 HY

:srixon-small:                        Z765 (5-PW) +2*                    Aerotech Steelfiber i110cw

:titelist-small:                        Vokey SM5 50.08F 54.10M   Aerotech Steelfiber i110cw

:callaway-small:                         PM Grind 60*                         Dynamic Gold S400

:ping-small:                      TR 1966 Anser 2

 

:srixon-small: Z Star ball        

:ping-small:  Pioneer Cart Bag

Share this post


Link to post
Share on other sites

That is one thick top line.

Yes it is. Though in hand pictures may be a little different. I'll photo it alongside the PTM. Looking forward to the blade version of this.

 

Sent from my SM-G892A using Tapatalk

Share this post


Link to post
Share on other sites

I have a set of the TS2 in play and they are phenomenal.

Right off the bat I put it head to head with a TM 790. 6 iron to 6 iron the launch and carry were identical, but the TS2 has better spin numbers. The TS2 has a softer feel and the results were repeated on course. They were also much better on dispersion.

 

The TS2 was a little more than a 1/2 club longer than the MMB. They are very easy to hit and the sole grind is near magic. It cruises through turf and rough. It's a subtle rocker, almost a v sole.

 

The accuracy of these were stellar. The star of the entire set wound up being the PW. I instantly fell in love with it and can hit any shot I choose with ease. A high full shot that stops instantly or a half swing, low two hop and stop checker. In hand they are very good looking and after the first round I dont even notice the thick top line. They also do extremely well at a knock down shot. Spin is damn near perfect. They have not spun back for me yet but even the 6 iron only releases at the most 4' from its pitch mark and that's the extreme. With summer baked out fairways these booted the MMBs out of the bag. The MMBs were digging in and every thing was borderline fat. These soles just glide over the turf. They won me over almost instantly.

 

This is Maltbys best iron to date,, bar none.

 

Sent from my SM-G892A using Tapatalk

Share this post


Link to post
Share on other sites

I have had these in play for a while now. I switched to the Dynamic Gold 105s S300 and it was a good move. Great distance, and I mean great. Accurate and they stop!!!. I am truly smitten with these and the more I play the more I love them. Shot a -4 and backed it up with a -2. A true point and shoot set of iron for a player. The dont like to be hit thin but on the button they feel amazing. Plus the sole is like magic. Not quite a true v sole but it glide through turf and rough. Have not hit anything fat and that is my miss. The TS-1 release is something I have been waiting for but these are so good im no longer waiting for them. If you struggle ball striking you might not like the feel but they still perform amazing.

 

Sent from my SM-G892A using Tapatalk

  • Like 2

Share this post


Link to post
Share on other sites

I would love to see these built and tested in the Most Wanted Players Irons Category.

 

Could someone please do that?

 

 

Sent from my iPhone using MyGolfSpy

  • Like 3

Ping G410 - set at 12 degrees, fade setting - Alpha Distanza 40 weak R flex shaft

Tour Exotics EX 10 3 wood

Ping G410 5-9 wood

G30 6-PW -  Aerotech FT 500 shafts

SCOR 48,52,58

EVNRoll ER 5

Titleist Pro VIx optic yellow with revkev stamped on them

Share this post


Link to post
Share on other sites

I would love to see these built and tested in the Most Wanted Players Irons Category.

 

Could someone please do that?

 

 

Sent from my iPhone using MyGolfSpy

Rev is that you??

  • Like 2

Share this post


Link to post
Share on other sites

Rev is that you??

Actually yes - just because a club category isn't right for me doesn't mean it's not right for others. Any way right or wrong most serious golfers are going to gravitate towards irons in this category anyway.

 

Maltby is the guru of playability - why shouldn't his equipment be included in a test head to head vs. other equipment whose playability he rates?

 

Let's see, in fact I would suggest entering two sets, one assembled by a professional club builder and one assembled by a guy in his work shop at home.

 

I'm serious about this one - I think it would be interesting. I've never owned Maltby irons but I've always admired them, him and those who game his stuff. I'd like to see how it performs in a test.

 

 

Sent from my iPhone using MyGolfSpy

  • Like 3

Ping G410 - set at 12 degrees, fade setting - Alpha Distanza 40 weak R flex shaft

Tour Exotics EX 10 3 wood

Ping G410 5-9 wood

G30 6-PW -  Aerotech FT 500 shafts

SCOR 48,52,58

EVNRoll ER 5

Titleist Pro VIx optic yellow with revkev stamped on them

Share this post


Link to post
Share on other sites

If more people realized that despite the MUCH lower cost that they perform as well or better than comparable OEM Maltby wouldn't be able to keep up.

I put the TS-2,, head to head with the P790 in the simulator and got the same exact launch and ball speed numbers but spin numbers were much better than the P790.

I have put Bobby products over the years against every OEM and the only thing that you're getting with OEM is less money in your pocket.

Over the years Maltby has designed quite a few OEM heads. They literally wrote the book on playability and their standards for club categories are used industry wide.

I love it at the 1st hole when someone will look at my Maltby gear and scoff at it.. at the 18th hole I gladly take their money.

I did a fitting with the woman yesterday that couldn't hit her ladies Taylor made driver more than 75 yds. I handed her an L Tech driver at 15゚ and the 1st 5 shots all when a 150 yd.

Flat out the Malby stuff works and they know how to design it for specific golfers and categories

Actually yes - just because a club category isn't right for me doesn't mean it's not right for others. Any way right or wrong most serious golfers are going to gravitate towards irons in this category anyway.

 

Maltby is the guru of playability - why shouldn't his equipment be included in a test head to head vs. other equipment whose playability he rates?

 

Let's see, in fact I would suggest entering two sets, one assembled by a professional club builder and one assembled by a guy in his work shop at home.

 

I'm serious about this one - I think it would be interesting. I've never owned Maltby irons but I've always admired them, him and those who game his stuff. I'd like to see how it performs in a test.

 

 

Sent from my iPhone using MyGolfSpy

Sent from my SM-G892A using Tapatalk

  • Like 1

Share this post


Link to post
Share on other sites

The 1st picture is the P790 And it clearly shows that it's not spinning as much. This was also proven in the golf course where the P790 couldnt hold the green. These were both 6 iron heads with the same loft20180627_181430.jpeg20180627_181625.jpeg

 

Sent from my SM-G892A using Tapatalk

Share this post


Link to post
Share on other sites

Actually yes - just because a club category isn't right for me doesn't mean it's not right for others. Any way right or wrong most serious golfers are going to gravitate towards irons in this category anyway.

 

Maltby is the guru of playability - why shouldn't his equipment be included in a test head to head vs. other equipment whose playability he rates?

 

Let's see, in fact I would suggest entering two sets, one assembled by a professional club builder and one assembled by a guy in his work shop at home.

 

I'm serious about this one - I think it would be interesting. I've never owned Maltby irons but I've always admired them, him and those who game his stuff. I'd like to see how it performs in a test.

 

 

Sent from my iPhone using MyGolfSpy

Most wanted blades... sign me up for full intrigue mode.

Share this post


Link to post
Share on other sites

Dang, I love the looks except I can't live with that topline.  Its super thick in the pics, reminds me of the older callaways or something. 


Ben S
Hailing from N Aurora IL

WITB:
Putter: Mizuno by Bettinardi BC1 w/SuperStroke MidSlim 2.0 Flamed finish (1 Degree)
Driver: Ping G – Mitsubishi Diamana Blue 73 X (10.5 Degree)
3 Wood : Callaway Epic Flash – Mitsubishi Tensei AV Blue 75 S (15.5 Degree)
3 Hybrid: Tour Edge CBX 119 – Project X EvenFlow Black 85 S (18 Degree)
3 Hybrid: Ping G – Mitsubishi Tensei CK Pro Blue HY 86 S (19 Degree)
4 – GW: Ping i210 - Oban CT-115 X (22.5 - 50 Degrees)
SW: Titleist SM7 S Grind - Tour Chrome - Stock S200 (54 Degree)
LW: Titleist SM7 D Grind - Tour Chrome - Stock S200 (58 Degree)
All Grips:  Winn Dri-Tec Midsize - Gray/Blue w/ 2 extra wraps low hand
Customizing:
Lime Green/Hot Pink Custom Paintfill - all clubs
White ferrules with Blue Stripes from Cell-Parts.net
Irons fitted & built by True Spec Golf
Custom Headcovers from Sunfish Golf
PING White DLX Cart Bag

Share this post


Link to post
Share on other sites

Dang, I love the looks except I can't live with that topline. Its super thick in the pics, reminds me of the older callaways or something.

After the first round you will never even notice the topline. I'm coming from blades and at first I was horrified.. then I started to hit them. The performance is what comes through.

 

Plus the TS-1 that's close to release is much narrower if you really can't get past it.

 

Sent from my SM-G892A using Tapatalk

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.


×
×
  • Create New...