Jump to content

Scotty Cameron Paint Fill


Recommended Posts

Our Sponsors

Hi all

 

Just thought I would share my current DIY which is paint filling my Scotty Cameron Studio Style Newport 2.. I could only find a base pic for a 2.5 though, however only difference as you know is the hosel really. Im going for a black and white them to keep it clean simple and looking smart hopefully...

 

Stock

SCSSN2.jpg

 

First coat of black on the sole...

IMG00088-20101109-2055.jpg

 

I will be doing the white tonight so stay tuned for more Pics

Link to post
Share on other sites

Little tip to make it look more glasslike? Do an acetone wash on the paintfill after it'd fairly dry. Flood the area with clean acetone for just a second and let it dry. Once it's completely dry, then wipe the excess with a dampened acetone rag. They'll be smooth as silk

In The Bag
Driver: TaylorMade M2 (2017) w/ Project X T1100 HZRDUS Handcrafted 65x 
Strong 3 wood: Taylormade M1 15* w/ ProjectX T1100 HZRDUS handcrafted 75x
3 Hybrid: Adams PRO 18* w/ KBS Tour Hybrid S flex tipped 1/2"
4 Hybrid: Adams PRO 20* (bent to 21*) w/ KBS Tour Hybrid S flex tipped 1/2"
4-AW: TaylorMade P770 w/ Dynamic Gold Tour Issue Black Onyx S400

SW: 56* Scratch Tour Dept(CC grooves) w/ Dynamic Gold Spinner
LW: 60* Scratch Tour Department (CC grooves) w/ Dynamic Gold Spinner
XW: 64* Cally XForged Vintage w/ DG X100 8 iron tiger stepped
Putter: Nike Method Prototype 006 at 34"

Have a ton of back-ups in all categories, but there are always 14 clubs in the bag that differ depending on the course and set-up. Bomb and gouge. Yes, I'm a club gigolo.

Link to post
Share on other sites

Little tip to make it look more glasslike? Do an acetone wash on the paintfill after it'd fairly dry. Flood the area with clean acetone for just a second and let it dry. Once it's completely dry, then wipe the excess with a dampened acetone rag. They'll be smooth as silk

 

 

That's what creates the gloss? I always thought that was clear coat paint or something.....I'm thinking of doing my own Scotty and maybe the new Slotline soon.

Link to post
Share on other sites

The acetone wash is the easiest way to get it smooth as silk. Any good quality paint (I prefer Tamiya X-Acrylics) in gloss or their translucents, will result in a glossy finish. The acetone wash is for making it as smooth as possible. The glossiness comes from the paint. I usually do a clear coat on top because it makes the paint look deeper (same principle as painting a car, the clearcoat is to make the paint look deeper, not more glossy). But the paint used determines glossiness. The acetone wash is to make it smooth.

In The Bag
Driver: TaylorMade M2 (2017) w/ Project X T1100 HZRDUS Handcrafted 65x 
Strong 3 wood: Taylormade M1 15* w/ ProjectX T1100 HZRDUS handcrafted 75x
3 Hybrid: Adams PRO 18* w/ KBS Tour Hybrid S flex tipped 1/2"
4 Hybrid: Adams PRO 20* (bent to 21*) w/ KBS Tour Hybrid S flex tipped 1/2"
4-AW: TaylorMade P770 w/ Dynamic Gold Tour Issue Black Onyx S400

SW: 56* Scratch Tour Dept(CC grooves) w/ Dynamic Gold Spinner
LW: 60* Scratch Tour Department (CC grooves) w/ Dynamic Gold Spinner
XW: 64* Cally XForged Vintage w/ DG X100 8 iron tiger stepped
Putter: Nike Method Prototype 006 at 34"

Have a ton of back-ups in all categories, but there are always 14 clubs in the bag that differ depending on the course and set-up. Bomb and gouge. Yes, I'm a club gigolo.

Link to post
Share on other sites

thanks for the tips... just put a white Iomic on it and it looks the goods now... the hardest thing of call was getting the paint fill in the dots smooth..

 

RB7 - wouldnt then light coat of acetone strip all the paint out ?

Link to post
Share on other sites
  • 2 weeks later...

thanks for the tips... just put a white Iomic on it and it looks the goods now... the hardest thing of call was getting the paint fill in the dots smooth..

 

RB7 - wouldnt then light coat of acetone strip all the paint out ?

 

Nope, been doing it for a few years now and it never has. You flood it for a brief second. The flash time of acetone is very short. Afterward, you let it dry then clean it up with acetone around it. When you wipe it with acetone, it doesn't remove it. Same principle here.

In The Bag
Driver: TaylorMade M2 (2017) w/ Project X T1100 HZRDUS Handcrafted 65x 
Strong 3 wood: Taylormade M1 15* w/ ProjectX T1100 HZRDUS handcrafted 75x
3 Hybrid: Adams PRO 18* w/ KBS Tour Hybrid S flex tipped 1/2"
4 Hybrid: Adams PRO 20* (bent to 21*) w/ KBS Tour Hybrid S flex tipped 1/2"
4-AW: TaylorMade P770 w/ Dynamic Gold Tour Issue Black Onyx S400

SW: 56* Scratch Tour Dept(CC grooves) w/ Dynamic Gold Spinner
LW: 60* Scratch Tour Department (CC grooves) w/ Dynamic Gold Spinner
XW: 64* Cally XForged Vintage w/ DG X100 8 iron tiger stepped
Putter: Nike Method Prototype 006 at 34"

Have a ton of back-ups in all categories, but there are always 14 clubs in the bag that differ depending on the course and set-up. Bomb and gouge. Yes, I'm a club gigolo.

Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...