StM Posted August 30, 2018 Share Posted August 30, 2018 EXPOSED: PEEK INSIDE 9 OF THE HOTTEST DRIVERS IN GOLF https://mygolfspy.com/a-look-inside-9-drivers Quite shocking to say the least. The hotmelt is being used to bring up the head weight to their required specs at the factories. The problem is obviously it could make each head slightly different - feel, balance, and sound. Knowing this, I would be afraid to order any non-weight-adjustable woods "online". This also answers the question about why my (tour-issue) 2017 M1 460 head came with "lighter" weights than the retail model. The head (with the weights and the hosel adapter) weighs exactly 200.0g, which means it pretty much guarantees there is no hotmelt inside. Truly enlightening! PS: I am now curious and want to open up my divorced retail R15 440 head, which never fully cooperated for the past 3 years... Forgiveness aside, any hits besides the bull's-eye dead center were complete garbage. 1 Quote Link to comment Share on other sites More sharing options...
russtopherb Posted August 30, 2018 Share Posted August 30, 2018 From what I've seen, using hotmelt in heads is fairly standard. Don't most, if not all, come with a hotmelt port anyways? Quote In my carry bag: Mavrik Max 10.5* R Flex Evenflow RipTide Hy-Wood Launcher 5h D7 6i-GW CBX 54* & 58* Huntington Beach #10 e12 Contact Link to comment Share on other sites More sharing options...
excourse Posted August 30, 2018 Share Posted August 30, 2018 The few club builders I know all used hot melt to manipulate swing weight. Sent from my SM-N950U using MyGolfSpy mobile app Quote Wishon clubs, Odyssey CS stroke lab putter Link to comment Share on other sites More sharing options...
StM Posted August 31, 2018 Author Share Posted August 31, 2018 Not sure about standard, maybe quite common among tour players who are provided half a dozen tour issue heads to play with. I thought hotmelt was a highly sophiscated, near-irreversable custom job for players with very specific needs, not a “standard†step during the manufacturing process. I guess this is why the retail heads come with the port plugged and the tour issues with the port left open. What really rattled me was this question, how would consumers like me know if there is hotmelt inside their $500 brand-new driver, not to mention where and how much exactly? You can only assume it would be anywhere near the hotmelt port, if any, as you can see in the article. I see some poor (very minor but still poor) paint jobs on about 2 out of 10 drivers. I cannot even imagine what kinda hotmelt jobs out there inside those heads... Quote Link to comment Share on other sites More sharing options...
russtopherb Posted August 31, 2018 Share Posted August 31, 2018 Why would a consumer care? This is an honest question - the average golfer who buys a driver off the shelf at DSG or GG is buying it for the features/pricetag and probably for the name, too. So if there's a bit of hotmelt in the head to get it to the proper stated weight, why does it matter? 2 Quote In my carry bag: Mavrik Max 10.5* R Flex Evenflow RipTide Hy-Wood Launcher 5h D7 6i-GW CBX 54* & 58* Huntington Beach #10 e12 Contact Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.