Jump to content
2 Weeks Remaining: MODERATOR WANTED Join the MyGolfSpy Staff! Read more... ×
Sign in to follow this  
StrightDownTheMiddle

Changing chafts, lengths and swing weights!

Recommended Posts

Hey all,

So I thought this would be a simple process, I bought a set of Mizuno JPX 850 forged irons. I knew the shafts were wrong when buying them but the heads were in great condition. The set came with standard length KBS Tour stiff shafts. I play 1" longer than standard Dynamic Gold S300's. I've not swapped out shafts before but I'm usually pretty DIY savey, bit of google, youtube how hard can it be.

Today I took the heads off, no problems there, easy enought to do. Only I've found some (not all) of the irons have tip weights (varying sizes). I've kept the weights with the heads that they were pulled from but the question is, how do I know if they're required for the new shafts? I've not a great deal of knowledge on swing weights (although I'm sure some googling might have the answers) I just thought I'd ping this one out there for anyone who fanicies educating me in this art :). The shafts are a .355 taper tip, which again I figured as they wouldn't need trimming would make this process a whole lot easier, plug and play! I could experiment easy enough but would like to save some time and get a bit more insight into this.

Interestingly the heads are stamped with a 'C' indicating they were a custom fit, perhaps they head weights were for this fitting purpose and consequently are not of any further use.

Thanks in advance and let me know if you need any further infomration

Phil

Share this post


Link to post
Share on other sites

Hi Phil we do have some good club builders here so give this some time they aren't on daily. Good luck getting your answer.

Share this post


Link to post
Share on other sites

You'll find that most OEM's end up using tip weights in their builds.  It's less expensive than the higher tolerances they'd have to pay for to have consistent weight across every iron.  So it's really just a way for them to hit the target swing weight.

Here are some quick rough estimates.  1/2" length = 3 swing weight points.  9 grams of shaft weight = 1 SWP.  5 grams grip weight = 1 SWP.  There are other things that can affect swing weight (club weight and lie angle but I'm going to assuming you won't be messing with those.

Here's where you have a few decisions to make.  You can absolutely just plug and play the shafts.  If you go this route you will most likely not have consistent swing weights across the set.  

Other option is to try and build them to a specific swing weight.  This is where being fit helps out so you will know what swing weight works best for you.  Otherwise it's kind of a shot in the dark.  You could also just try and build them to the factory spec which can be found online.  Right off the bat the clubs will most likely be a heavier swing weight just from the 1" over length spec.  

So it's really your choice how far down the rabbit hole you want to go.  If you start building your own stuff I'd highly recommend investing in a swing weight scale.  You can get them relatively inexpensively from golfworks.com (wait for the 20% tools coupon) or various other places online.

Hopefully that rambling answer made some sort of sense.  If you have more questions fire away.

  • Like 4

Share this post


Link to post
Share on other sites

1) You could have just extended the shafts 1" The KBS imo is a better shaft.

2) Remove the weights and reinstall them. It to ensure the epoxy gets into the space inside and out of the shaft and the hosel. Dirt is not you friend and there is plenty in there if you take it out.

3) Yes the swing weight will go up making the length longer. If you are putting on larger grips it will balance a good portion of the SW added from the length.

 

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
Sign in to follow this  

  • Member Statistics

    • Total Members
      75,440
    • Most Online
      2,247

    Newest Member
    SuperSpeed Golf
    Joined
  • Exo Putters   11 members have voted

    1. 1. Which Model of the EXO Putters would YOU play?


      • Seven
      • Rossie
      • Indianapolis

    Please sign in or register to vote in this poll. View topic
  • HAPPY BIRTHDAY!!

  • Popular Contributors

  • Recent Status Updates

    • tommc23

      Dang shotguns got too many of them they are just laying around now lol
      · 0 replies
    • warbirdlover

      Older then dirt
      · 0 replies
    • Jaredchadd

      Where do i fill out "what's in my bag"?
      · 1 reply
    • Mitchdpg

      Avid 3-4 handicap golfer, product tester, always tinkering and trying to get better. 
       
      · 0 replies
    • MWGolf23

      Next steps to my road to improvement
      Current
       Adding the Mizuno MMC FliHi 4 iron to the bag once it comes it to replace my hybrid. The hybrid has too significant of a draw bias, not terrible, but I also draw the ball naturally already, and will probably go in and out of the bag, but I'm looking for better shot shaping with the FliHi and have that 210 to 225 distance into the green and off of the tee. Working on my putting. I'm rolling the ball nicely now with a slightly open stance with my current putter. I have another putter that I can get the ball rolling online, but the pace is off. Future step is to actually get fit for a putter. Working on my natural tempo and swing speed for the driver to have more consistent drives. See below for more info. Next
      Driver shaft optimization. Not looking for a new head yet. I like my 2017 M1 460. Interested in the journey of testing some shafts. Right now my shaft is determining what kind of shot I can do. Slower speed and tempo than my natural speed and tempo. This has lead to a great deal of inconsistency of trying to find the "magic speed and tempo" and I know that isn't the way to go. Swing speed training. I'll have multiple shafts at this point so I can game whatever is best fitting me as I go along. And I can always swing a little slower or club down to hit a fairway. Future
      Get fitted for a putter > get fitted for a driver/shaft and woods from a high level, reputable company willing to discuss numbers and takes the time and right approach. Open to custom shafts and not just from the OEM cart like at a Golf Galaxy. I have only been fitted to a driver once, but didn't purchase as I did not like the experience, small selection of shafts, and I wasn't swinging my natural speed and tempo like I should have.  
       
      · 0 replies
×