Jump to content
TESTERS WANTED! ×

Sub70 golf


Sluggo42

Recommended Posts

So close to trying out a couple of 699s! 😊 Loving Sub 70's demo program.

image.png.3cdd03a11b467f2dd1efede360247ffc.png

:Sub70: 849D with Evenflow Riptide (stiff)

:taylormade-small: V Steel 3 & 5 woods

:Sub70: 699U 3 (19.5*) 

:Sub70: 939X 4H 

:Sub70:  699 (4-6) / 699 Pro (7-PW) with KBS Tour 120 shafts (stiff)

:Sub70: 286 Wedge (50 degrees)

:cleveland-small: 588 RTX 2.0 (56 degrees)

:EVNROLL: ER8v with Fujikura MC shaft (firm)

:maxfli: Tour 

:1590477705_SunMountain: 2023 2.5+ / :nike-small: University of Miami Stand Bag

:BagBoy: Nitron - Forum Test Review

:ShotScope: Pro L2

Garmin S10

Link to comment
Share on other sites

On 5/28/2021 at 12:05 PM, Hobert said:

image.png.c99c48c403a161fdaa202b5632ebf09f.png699 Demo order placed 😃

You'll love them!

Ping G430 Max 9* turned up to 10* in draw setting X-Stiff Ping Tour Chrome 2.0 60

Srixon ZX 3w Ventus Velocore Blue 7s

Ping G425 5w X-Stiff Ping Tour 70 

Srixon ZX5 4-6 Modus Tour 105 Stiff 

Srixon ZX& 7-PW  Modus Tour 105 Stiff 

:cleveland-small: RTX Zipcore 50* 54* 58* TrueTemper Dynamic Gold Spinner

 See the source image Phantom X5 Putter

Ball: Srixon Z-Star Diamond <>

 

Link to comment
Share on other sites

699 demo clubs arrived today! The tees, ball marker, sticker and hand-written note were very nice touches. Headed to the range this evening to give them a try.

PXL_20210605_192152554.jpg.96c770a953babbad28ed989808c9905e.jpgPXL_20210605_192322199.jpg.43780a7accb738076369e240c6d0822a.jpg

:Sub70: 849D with Evenflow Riptide (stiff)

:taylormade-small: V Steel 3 & 5 woods

:Sub70: 699U 3 (19.5*) 

:Sub70: 939X 4H 

:Sub70:  699 (4-6) / 699 Pro (7-PW) with KBS Tour 120 shafts (stiff)

:Sub70: 286 Wedge (50 degrees)

:cleveland-small: 588 RTX 2.0 (56 degrees)

:EVNROLL: ER8v with Fujikura MC shaft (firm)

:maxfli: Tour 

:1590477705_SunMountain: 2023 2.5+ / :nike-small: University of Miami Stand Bag

:BagBoy: Nitron - Forum Test Review

:ShotScope: Pro L2

Garmin S10

Link to comment
Share on other sites

  • 1 month later...

Finally jumped on the demo bandwagon.  I play Titleist AP2s currently (with a few AP1s at the top end of the set).

So I started with the 639 MBs because why not.  After a round I like them but dont LIKE them.  So the 639 CBs just arrived - waiting on the label to send the MBs back.

If the CBs are better than the MBs it'll be a no brainer and likely to be a 639 combo set.  We will see though!

20210706_163416.jpg

  • :titelist-small: TSi 2 10D
  • :titelist-small: 917 F2 3W
  • :titelist-small: 716 T-MB 3i
  • :titelist-small: 716 AP1 4-5i
  • :titelist-small: 716 AP2 6-PW
  • :titelist-small: SM6 52/58 wedges
  • Toulon Rochester
  • :Snell: MTB-X
Link to comment
Share on other sites

17 minutes ago, tommc23 said:

After doing the review this year on the hybrid. I’m thinking about trying a 3w to replace my older 3w whose hosel is moving on me

I LOVE my 939X 3 wood. I've got the EvenFlow Blue 6.0 in it and it's pretty good off the tee and great off the deck.

In the bag:
Driver: :titelist-small: TSR2 Project X HZRDUS Black 5.5
Fairway: :callaway-small: Apex UW 19° & 21° Project X HZRDUS Smoke RDX Black 5.5

Irons: :mizuno-small: JPX 923 HMP 5-PW UST Mamiya Recoil 95 F4
Wedges: :mizuno-small: T-22 Denim Copper 48°, 52° & 56° UST Mamiya Recoil 95 F4
Putter :Sub70: Sycamore 005 Wide Blade
Bag: 
:Ogio: Alpha Convoy 514
Balls: :callaway-small: Chrome Soft X

Cart: :CaddyTek: CaddyLite ONE Ver. 8


God Bless America🇺🇸, God save the King🇬🇧, God defend New Zealand🇳🇿 and thank Christ for Australia🇦🇺!

Link to comment
Share on other sites

4 hours ago, MattF said:

I LOVE my 939X 3 wood. I've got the EvenFlow Blue 6.0 in it and it's pretty good off the tee and great off the deck.

I have the 80g in my hybrid and I’m ripping it nearly as far as my 3w sometimes when I get a hold of it! Never used evenflow before and honestly it’s not what I asked for but dang it I like it more than the hzrdus smoke I asked for and hit in my fitting. I may have to go with Evenflow in the 3w but I use an x-stiff in my 3w not stiff currently so I’m not sure what I’d want to do there because I was fit for x-stiff hzrdus black in driver. I’m definitely going to get a 3w soon just have to decide what I want to do. I also have a shaft I was fit for that I purchased in case I didn’t hit the shaft for my hybrid so do I get a 2h and put that shaft in it and get a 3w also I’m not sure. If I got a 2h it would probably go as far as my 3w(I bought off the rack never fitted for). Decisions decisions but I do really like how well I hit this hybrid I got I never got along with hybrids before but I definitely get along with it enough it kicked my driving iron out of the bag for good! Sorry this is a little of a hint of how my review is going to go.

Link to comment
Share on other sites

My biggest concern is shaft selection.  I don't have a great chance here to test shafts and if I did it wouldn't be with the Sub70 stuff.

I currently run DG S300s - I'll likely go with those but we'll see.  I might move to something graphite too.

  • :titelist-small: TSi 2 10D
  • :titelist-small: 917 F2 3W
  • :titelist-small: 716 T-MB 3i
  • :titelist-small: 716 AP1 4-5i
  • :titelist-small: 716 AP2 6-PW
  • :titelist-small: SM6 52/58 wedges
  • Toulon Rochester
  • :Snell: MTB-X
Link to comment
Share on other sites

18 hours ago, etakmit said:

My biggest concern is shaft selection.  I don't have a great chance here to test shafts and if I did it wouldn't be with the Sub70 stuff.

I currently run DG S300s - I'll likely go with those but we'll see.  I might move to something graphite too.

If you give us a call we'll be more than happy to go through everything and try to make a recommendation. Our customer support team does that kind of stuff all day and can offer their insights

Link to comment
Share on other sites

3 hours ago, GolfSub70 said:

If you give us a call we'll be more than happy to go through everything and try to make a recommendation. Our customer support team does that kind of stuff all day and can offer their insights

wait ... " a call " ... im not familiar with this terminology 🤣

  • :titelist-small: TSi 2 10D
  • :titelist-small: 917 F2 3W
  • :titelist-small: 716 T-MB 3i
  • :titelist-small: 716 AP1 4-5i
  • :titelist-small: 716 AP2 6-PW
  • :titelist-small: SM6 52/58 wedges
  • Toulon Rochester
  • :Snell: MTB-X
Link to comment
Share on other sites

5 hours ago, etakmit said:

wait ... " a call " ... im not familiar with this terminology 🤣

If you have the time, reach out to Jason. He's the owner... he will happily walk through shaft selections... he knows his stuff. 

Mavrik 9 degree - Ventus Black 7X

Mavrik 13.5 Degree - Hazardus Smoke

Sub70 19 degree - Proforce V2 8F5

Sub70 4u - Proforce V2 8F5

Sub70 5i - DG S400

Adams CMB 6-GW - Project X 6.0

Sub70 54 (286) and 58 (JB Low Bounce) - S300

SeeMore Trimetal Mallet (Custom fit and built... Kudos to Cody)

And as always, Kudos to Craigers.

Link to comment
Share on other sites

4 hours ago, myherobobhope said:

If you have the time, reach out to Jason. He's the owner... he will happily walk through shaft selections... he knows his stuff. 

I second that. 

D- Tour Edge EXS 220

4W- Sub 70 949X

Hybrid- Sub 70 949X

Utility- Sub 70 699 U  21 degree

Irons- Sub 70 749 5-PW

Wedges- Sub 70 286 50+54, Tour Edge 1 out 58 degree 

Putter- Cleveland Huntington Beach soft # 11

Ball- Titleist Tour Soft

Link to comment
Share on other sites

22 hours ago, myherobobhope said:

If you have the time, reach out to Jason. He's the owner... he will happily walk through shaft selections... he knows his stuff. 

That's my intention at some point!

  • :titelist-small: TSi 2 10D
  • :titelist-small: 917 F2 3W
  • :titelist-small: 716 T-MB 3i
  • :titelist-small: 716 AP1 4-5i
  • :titelist-small: 716 AP2 6-PW
  • :titelist-small: SM6 52/58 wedges
  • Toulon Rochester
  • :Snell: MTB-X
Link to comment
Share on other sites

I have read this entire thread but didn't see anybody that went into detail (may have missed it) about the 639CB vs 699pro. I am currently demoing the 639CB and I love the looks, feel and feedback it gives but I am probably a shade or two short on the talent required to play them (if interested see thread here ). I have read the website copy and I know that the feel will likely differ significantly going from a forged player's cavity back to an injected, hollow body milled iron but I am trying to move beyond "feel" since that is subjective. BUT, I would like to be able to feel where I missed on the clubface on mishits. That is an issue I have on my Cobra F9s and was wondering if people who have hit both 639CB and 699pro can comment on the differences in feedback on the two as well as maybe spin and ballspeed. Thanks in advance!

:mizuno-small: STZ 230 9.5* "Std" setting ➖ :mizuno-small: STZ 230 Hybrid 18* "lower" setting➖ :mizuno-small: Pro Fli-Hi 21.5* ➖ MALTBY TS1-IM 5-GW ➖ :benhogan-small: Equalizer II 54* ➖ :ping-small: Glide 4.0 (S) 58* ➖ L.A.B. Directed Force 2.1 
Maxfli Tour X Official Review -- https://forum.mygolfspy.com/topic/63068-testers-announced-maxfli-tour-x-golf-balls-with-max-align-technology/?do=findComment&comment=1021832

Link to comment
Share on other sites

3 hours ago, vandyland said:

I have read this entire thread but didn't see anybody that went into detail (may have missed it) about the 639CB vs 699pro. I am currently demoing the 639CB and I love the looks, feel and feedback it gives but I am probably a shade or two short on the talent required to play them (if interested see thread here ). I have read the website copy and I know that the feel will likely differ significantly going from a forged player's cavity back to an injected, hollow body milled iron but I am trying to move beyond "feel" since that is subjective. BUT, I would like to be able to feel where I missed on the clubface on mishits. That is an issue I have on my Cobra F9s and was wondering if people who have hit both 639CB and 699pro can comment on the differences in feedback on the two as well as maybe spin and ballspeed. Thanks in advance!

I have the 4 utility and the 5 639… there is definitely less feedback from the 699, but you can still feel the impact. They are solid clubs… im a 7 handicap and a decent ball striker and I’d happily play them but I don’t want the distance gains. 

Mavrik 9 degree - Ventus Black 7X

Mavrik 13.5 Degree - Hazardus Smoke

Sub70 19 degree - Proforce V2 8F5

Sub70 4u - Proforce V2 8F5

Sub70 5i - DG S400

Adams CMB 6-GW - Project X 6.0

Sub70 54 (286) and 58 (JB Low Bounce) - S300

SeeMore Trimetal Mallet (Custom fit and built... Kudos to Cody)

And as always, Kudos to Craigers.

Link to comment
Share on other sites

19 hours ago, vandyland said:

I have read this entire thread but didn't see anybody that went into detail (may have missed it) about the 639CB vs 699pro. I am currently demoing the 639CB and I love the looks, feel and feedback it gives but I am probably a shade or two short on the talent required to play them (if interested see thread here ). I have read the website copy and I know that the feel will likely differ significantly going from a forged player's cavity back to an injected, hollow body milled iron but I am trying to move beyond "feel" since that is subjective. BUT, I would like to be able to feel where I missed on the clubface on mishits. That is an issue I have on my Cobra F9s and was wondering if people who have hit both 639CB and 699pro can comment on the differences in feedback on the two as well as maybe spin and ballspeed. Thanks in advance!

I'm hoping someone with experience of both will see your post and chime in.  I haven't played either, so I'm no help there.  I will say all the hollow bodied irons I've hit, including 2 models I've owned, gave less feedback than muscle backs or small, one piece cavity backs.  I am currently playing the original PXG 0211 irons and can tell by feel and sound when I mishit it, but I can only tell where on the face I hit it if it was a HUGE mishit.  Another factor is the shaft.  Graphite and shafts with dampening inserts will give less feedback.  I have an ancient set of Wilson blades that I put prosoft inserts into.  I used to be able to pinpoint the mishits with those.  With the softening inserts I only get a general idea.

14 of the following:

Ping G430 Max 10.5 degree

Callaway 2023 Big Bertha 3 wood set to 17 degrees

Cobra F9 Speedback 7/8 wood set at 23.5 degrees

Callaway Epic Max 11 wood

Ping Eye 2 BeCu 2-SW

Mizuno 923 JPX HM HL 6-GW

Hogan sand wedge 56 degree bent to 53

Maltby M Series+ 54 degree

Ping Glide 3.0 Eye2 58 degree

Ping Glide 3.0 60 degree

Evnroll ER2

Ping Sigma 2 Anser

Cheap Top Flite mallet putter from Dick's, currently holding down first place in the bag

TaylorMade Mini Spider

Bridgestone XS

Link to comment
Share on other sites

So question to everyone (maybe someone has hit both), and @GolfSub70. I game the 939X hybrid. Is it worth it to upgrade to the 949X? Is the face really much hotter? Does the sole really help the turf interaction(looks really nice in the pictures)? 

Follow my journey to enjoying golf and going low

Driver: :callaway-small:   Epic Max LS :Fuji:Ventus Black 6x 44.5" 

3wHL: :callaway-small: Rogue ST LS 75x  Tensei AV Blue w/ xlink

7w: :callaway-small:Apex UW 21* MMT 80S

DI: Caley 01X 18* with KBS PGH Stiff plus 95g

4-AW: th.jpg.d6e2abdaeb04f007fd259c979f389de6.jpg  0211  with KBS Tour Stiff 2.5* up 3/4" long, Soft stepped, MOI matched

Wedges     :cleveland-small: Zipcore 

Putter: L.A.B. Directed Force 2.1 69*/35" in blue 

 

Ball:  TBD

Shot Tracking: :ShotScope:

Bag: Vessel VLX 2.0

Grip: Lamkin Sonar +  Midsize 

My Reviews:

Caley 01X Driving Iron Review 2023

Max Swing Speed Training and Speed Progress: Current Speed 120 in the MGS Speed Challenge (updated 3/15/23)

 :1332069271_TommyArmour:TAIII #2  Review here: TAIII Impact #2 Putter )

 :cleveland-small: Zipcore Tour Rack 54/full and 58/mid (review here)

th.jpg.d6e2abdaeb04f007fd259c979f389de6.jpg  0211  2019 Unofficial Review

 

 

 

Link to comment
Share on other sites

4 hours ago, rbsiedsc said:

So question to everyone (maybe someone has hit both), and @GolfSub70. I game the 939X hybrid. Is it worth it to upgrade to the 949X? Is the face really much hotter? Does the sole really help the turf interaction(looks really nice in the pictures)? 

It's a bigger number, so of course it is better /s  

 

(honestly no idea, but I'm looking at it for a 4H.  I'm torn between a 4H, 4U or a 4i.  I need something that gets a bit higher in the air, so I'm leaning hybrid, but I don't know.)

Driver:  Ping 425LST 9*  (Aldila Rouge White 130) 

3 Wood: Sub70 Pro (13) (HZRDS Black 60)

3U: Sub70 (19.5) (True Temper Project X U) 

Irons: Sub70 699 Pro (5-Gap) (Dynamic Gold S300)

Wedges: Vokey SM8 54 and 58 (10S)  (Project X)

Putter: Some old green Nike Blade

Link to comment
Share on other sites

Quote

(honestly no idea, but I'm looking at it for a 4H.  I'm torn between a 4H, 4U or a 4i.  I need something that gets a bit higher in the air, so I'm leaning hybrid, but I don't know.)

You should check out the TXG youtube video on long iron vs hybrid vs fairway wood for flight, spin, etc. It was eye opening to me and the results should have been fairly obvious (iron flights lowest, hybrid mid, fwy wood highest) but the spin was interesting because the irons not only fly low they also have less spin and less steep decent angle so harder to hold greens. I also find that, off a tee, a 4 hybrid is straighter than a 4 iron most of the time. 

:mizuno-small: STZ 230 9.5* "Std" setting ➖ :mizuno-small: STZ 230 Hybrid 18* "lower" setting➖ :mizuno-small: Pro Fli-Hi 21.5* ➖ MALTBY TS1-IM 5-GW ➖ :benhogan-small: Equalizer II 54* ➖ :ping-small: Glide 4.0 (S) 58* ➖ L.A.B. Directed Force 2.1 
Maxfli Tour X Official Review -- https://forum.mygolfspy.com/topic/63068-testers-announced-maxfli-tour-x-golf-balls-with-max-align-technology/?do=findComment&comment=1021832

Link to comment
Share on other sites

At my skill level, I don't realistically have any hope of holding a green from 220+ all I'm looking for is nGIR (obviously, it makes sense to have the best tool to hold the green).  

I tend to hit pretty high in general, but it looks like my 5i has a descent angle around 35-38*  That isn't giving me a great chance to hold a certain distance as it tends to run quite a bit after landing.  So I think perhaps a 4H is the best option for me (and probably to replace my 3U with a 3H as well).  The upper end of the bag is a challenge for me to find the right clubs. 

Edited by Jonny_Crash

Driver:  Ping 425LST 9*  (Aldila Rouge White 130) 

3 Wood: Sub70 Pro (13) (HZRDS Black 60)

3U: Sub70 (19.5) (True Temper Project X U) 

Irons: Sub70 699 Pro (5-Gap) (Dynamic Gold S300)

Wedges: Vokey SM8 54 and 58 (10S)  (Project X)

Putter: Some old green Nike Blade

Link to comment
Share on other sites

Feels soooo god to be able to swing clubs again. 

I currently have 2 sets of demos. 699 and the 699 pros. 
I really like the 699’s. Smooth same distance as my current XHot Callaways, but have a better feel and the ball flight is the same. To me easier to work a draw but it takes me a bit to hit a fade with them which I am fine with. 
 

I haven’t hit the Pros yet but will either tonight or tomorrow. 
 

i think my biggest problem is going to be figuring out the top end of the bag. I won’t have anything from a 4 iron to my driver. The reason I’m in the market for clubs is my bag took a dive and I had 4 of the clubs break. Driver, 1 iron , 4 & 7 irons. a phone call will be made to get suggestions soon. 
 

great thread here fellas. 

Sub 70 949 D 9* HZRUDS 60G 6.5 smoke RDX shaft. 

Sub 70 949X 4 wood ALDILA ABV 65-S shaft

Sub 70 699 Pro 4-AW 

Sub 70 3 utility 19*

Callaway 56 and 58 wedge. 

OG White Hot #1 putter

Link to comment
Share on other sites

2 hours ago, JFish350 said:

Feels soooo god to be able to swing clubs again. 

I currently have 2 sets of demos. 699 and the 699 pros. 
I really like the 699’s. Smooth same distance as my current XHot Callaways, but have a better feel and the ball flight is the same. To me easier to work a draw but it takes me a bit to hit a fade with them which I am fine with. 
 

I haven’t hit the Pros yet but will either tonight or tomorrow. 
 

i think my biggest problem is going to be figuring out the top end of the bag. I won’t have anything from a 4 iron to my driver. The reason I’m in the market for clubs is my bag took a dive and I had 4 of the clubs break. Driver, 1 iron , 4 & 7 irons. a phone call will be made to get suggestions soon. 
 

great thread here fellas. 

 Check out my review on the hybrid that I just posted. I was in the same boat it is filling that gap perfectly!

Link to comment
Share on other sites

My 58 JB was an all star today in route to my lowest round in 20 years… love my sub70 stuff!

Mavrik 9 degree - Ventus Black 7X

Mavrik 13.5 Degree - Hazardus Smoke

Sub70 19 degree - Proforce V2 8F5

Sub70 4u - Proforce V2 8F5

Sub70 5i - DG S400

Adams CMB 6-GW - Project X 6.0

Sub70 54 (286) and 58 (JB Low Bounce) - S300

SeeMore Trimetal Mallet (Custom fit and built... Kudos to Cody)

And as always, Kudos to Craigers.

Link to comment
Share on other sites

5 hours ago, myherobobhope said:

My 58 JB was an all star today in route to my lowest round in 20 years… love my sub70 stuff!

I have a JB 56 and a 286 52, I equally love them both. I tried I few other wedges this year and went right back to sub 70

WITB:

Driver:   :taylormade-small: SIM2 Max 12° - Accra TZ6 M4

FW Wood:     th.jpg.d6e2abdaeb04f007fd259c979f389de6.jpg Gen5 0311 7w  Fujikura Motore X F3

Irons:   :srixon-small: ZX7 PW-7i, ZX5 6i-5i

Wedges: :cleveland-small:  Zipcore 50°, 58°

Putter:   :taylormade-small: MySpider X

Cart: image.png.5aa5e9b8c0d6e08a2b12be76a06a07ca.pngOnewheel XR+

Ball: :srixon-small: Z-Star Diamond/ Z-Star XV

  1

 

 

 

 

 

Link to comment
Share on other sites

8 hours ago, Thin2win said:

I have a JB 56 and a 286 52, I equally love them both. I tried I few other wedges this year and went right back to sub 70

Yeah, I went 286 54 and low bounce jb 58… it’s a solid combination that gets things done around the green for me…

I shot a 75 with 11 GIR and 4 bogeys… the wedges gave me makeable par putts all day long.

Mavrik 9 degree - Ventus Black 7X

Mavrik 13.5 Degree - Hazardus Smoke

Sub70 19 degree - Proforce V2 8F5

Sub70 4u - Proforce V2 8F5

Sub70 5i - DG S400

Adams CMB 6-GW - Project X 6.0

Sub70 54 (286) and 58 (JB Low Bounce) - S300

SeeMore Trimetal Mallet (Custom fit and built... Kudos to Cody)

And as always, Kudos to Craigers.

Link to comment
Share on other sites

On 7/16/2021 at 11:10 PM, Thin2win said:

I have a JB 56 and a 286 52, I equally love them both. I tried I few other wedges this year and went right back to sub 70

Being that you were a bit skeptical of performance across wedge brands (I think that was your thread), do you think the Sub70s are that much better than the other stuff you tried? I've been eying the JB wedges and am thinking a set of raw ones might be my next wedge purchase.

Unofficial WHS Handicap: 7.5 / Anti-Cap: 13.0 (Last Updated Feb. 19, 2024)

Driver: callaway_logo.png.3dd18aa65544000dd0ea3901697a8261.png Callaway Paradym TD (10.5°, -1/N), 45.75", Fujikura Motore X F1 6X | Fitting Post
3 Wood: 
cobra_logo.png.190908c8b4518eec87c087429e4343ee.png Cobra RadSpeed Big Tour (14.5°), 43", Fujikura Motore X F1 7X
20° Hybrid: PXG_Logo.png.8401024d1fb8aec46f0e790c1aa5b80c.png PXG 0211 (2020 Model), 40.25", Mitsubishi Tensei AV RAW White 90X
4 Utility: 
cobra_logo.png.190908c8b4518eec87c087429e4343ee.png Cobra KING Utility (2020 Model), 38.5", Aerotech SteelFiber i110cw Stiff
5-PW:
logo-Ben-Hogan-large.png.98d743ae5487285c6406a1e30a0a63b5.png Ben Hogan PTx Pro, 37" 7 Iron, Aerotech SteelFiber i125cw Stiff | Club Champion Fitting
50°, 54°, 58°:
231036130_Edel_Golf_Logo_v2_grandecopy.png.13cc76b963f8dd59f06d04b1e8df2827.png Edel SMS, V Grind, Nippon Modus 125 Wedge| Official Review Thread
Putter:
image.png.49fcc172a1ed0010d930fbe1c5dc8b79.png L.A.B. Golf DF 2.1, 36", 68°, Black with Custom Sightlines, BGT Stability Tour, L.A.B. Press II 3° | Unofficial Review
Grips: 
stargrip.png.4285948f41f1409613266e7803f0bbaa.png Star Sidewinder, Undersized with Custom Tape Build-Up
Ball: :Snell:Snell MTB-X Optic Yellow

Tracked By: shotscope.png.4a7089f2bddff325285b1266a61dda03.png  Shot Scope H4
Bag: :1590477705_SunMountain: Personalized 2020 Sun Mountain Sync
Riding On: 
image.png.1db52ce91db040317a9ac580f1df8de8.pngBag Boy Nitron | Official Review Thread

WITB? | 2022 Reviewer Edel SMS Wedges | 2021 Reviewer Maxfli Tour and Tour X Balls2020 Participant #CobraConnect Challenge | 2019 Reviewer Callaway Epic Flash Driver

 

Link to comment
Share on other sites

Had a bunch of back and forth with Dan regarding shaft selection.

I have a very high ball flight with my DG S300s and was looking for a way to drive that down some.  Problem is the S300s are low flight already.

After some conversation I may try C-Taper Xs soft stepped when I finally jump in.

  • :titelist-small: TSi 2 10D
  • :titelist-small: 917 F2 3W
  • :titelist-small: 716 T-MB 3i
  • :titelist-small: 716 AP1 4-5i
  • :titelist-small: 716 AP2 6-PW
  • :titelist-small: SM6 52/58 wedges
  • Toulon Rochester
  • :Snell: MTB-X
Link to comment
Share on other sites

45 minutes ago, etakmit said:

Had a bunch of back and forth with Dan regarding shaft selection.

I have a very high ball flight with my DG S300s and was looking for a way to drive that down some.  Problem is the S300s are low flight already.

After some conversation I may try C-Taper Xs soft stepped when I finally jump in.

Is actually high or perceived high? What’s your launch angle, spin, apex, land angle?

Driver: PXG 0811 X+ Proto w/UST Helium 5F4

Wood: TaylorMade M5 5W w/Accra TZ5 +1/2”, TaylorMade Sim 3W w/Aldila rogue white

Hybrid: PXG Gen2 22* w/AD hybrid

Irons: PXG Gen3 0311T w/Nippon modus 120

Wedges: TaylorMade MG2 50*, Tiger grind 56/60

Putter: Scotty Caemeron Super Rat1

Ball: Titleist Prov1

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...