Jump to content
TESTERS WANTED! ×

Sub70 golf


Sluggo42

Recommended Posts

Joined the Sub 70 club with an arrival yesterday.  Unfortunately, I didn't buy them directly, which given everything I've heard is a bummer, but I stumbled across a combo 699 pro/639cb set on ebay Christmas day that was about to close for an absurd price.  I took a flyer and ended up winning.  They arrived yesterday and was intending to pull  the shafts and resell them since they were x-flex then re-shaft.  I figured I'd hit them today and see what they felt like before I pulled the shafts.... They weirdly work for me.  A slightly lower more penetrating flight, but by no means too low, almost to a tee similar distance to my gamers and from what I can see out on the target greens they stick in a similar way.  Go figure. 

I'm really happy because I bought them to force me into improving my strike and figured I'd have to grow into them, but now I think I might be able to put them in play much sooner than I had planned.   Still some work to do, but I'm not as far off as my handicap would indicate.

Driver

311062546_PXG_LogoSmall.jpg.1ff58b767d1fb1cdfeac9a387718766e.jpg  0811XT -- Tensei CK Orange 60

Woods

PXG_Logo Small.jpg 0211 3W -- Tensei AV Raw Blue

Hybrids

image.png.374545efa45a29aed00287677e783604.png  0317X 2&4 -- Tensei AV Raw Blue 

Irons 

:srixon-small: ZX7 4/AW -- C-Taper Lite 110

Wedges

:cleveland-small:  RTX Zipcore 56 Mid @55° -- TT DG Spinner

Putter

Test.png DF2.1 or Link.1 -- Accra

Ball

:srixon-small:  Zstar Diamond

 

Link to comment
Share on other sites

16 hours ago, Syks7 said:

Joined the Sub 70 club with an arrival yesterday.  Unfortunately, I didn't buy them directly, which given everything I've heard is a bummer, but I stumbled across a combo 699 pro/639cb set on ebay Christmas day that was about to close for an absurd price.  I took a flyer and ended up winning.  They arrived yesterday and was intending to pull  the shafts and resell them since they were x-flex then re-shaft.  I figured I'd hit them today and see what they felt like before I pulled the shafts.... They weirdly work for me.  A slightly lower more penetrating flight, but by no means too low, almost to a tee similar distance to my gamers and from what I can see out on the target greens they stick in a similar way.  Go figure. 

I'm really happy because I bought them to force me into improving my strike and figured I'd have to grow into them, but now I think I might be able to put them in play much sooner than I had planned.   Still some work to do, but I'm not as far off as my handicap would indicate.

That’s one of the advantages on the DTC brands is you can try a club that may be out of your skill level with a lesser financial commitment! Welcome to the Sub 70 movement!

Ping G430 Max 9* turned up to 10* in draw setting X-Stiff Ping Tour Chrome 2.0 60

Srixon ZX 3w Ventus Velocore Blue 7s

Ping G425 5w X-Stiff Ping Tour 70 

Srixon ZX5 4-6 Modus Tour 105 Stiff 

Srixon ZX& 7-PW  Modus Tour 105 Stiff 

:cleveland-small: RTX Zipcore 50* 54* 58* TrueTemper Dynamic Gold Spinner

 See the source image Phantom X5 Putter

Ball: Srixon Z-Star Diamond <>

 

Link to comment
Share on other sites

  • 2 weeks later...

PSA:

Quote

Due to rising supply chain & shipping costs we will be implementing small price increases for 2022. These increases will go into effect on 1/17. Orders placed by 1/16 will receive the current pricing. 


This was posted by Sub 70 on their various social media pages yesterday. From a question they answered it'll be between 10-15%. 

That's a bummer, however, kudos to them for getting in front of it and letting everyone know ahead of time instead of staying mute and letting it happen.

In the bag:
Driver: :titelist-small: TSR2 Project X HZRDUS Black 5.5
Fairway: :callaway-small: Apex UW 19° & 21° Project X HZRDUS Smoke RDX Black 5.5

Irons: :mizuno-small: JPX 923 HMP 5-PW UST Mamiya Recoil 95 F4
Wedges: :mizuno-small: T-22 Denim Copper 48°, 52° & 56° UST Mamiya Recoil 95 F4
Putter :Sub70: Sycamore 005 Wide Blade
Bag: 
:Ogio: Alpha Convoy 514
Balls: :callaway-small: Chrome Soft X

Cart: :CaddyTek: CaddyLite ONE Ver. 8


God Bless America🇺🇸, God save the King🇬🇧, God defend New Zealand🇳🇿 and thank Christ for Australia🇦🇺!

Link to comment
Share on other sites

  • 1 month later...

Went to Golf Galaxy to get my numbers with a 7 iron (hit an Apex DCB). Based on this and my other info, Jason recommended a 699 (4-6)/699 Pro (7-pw) combo with KBS Tour 120 Stiff shafts and +1/4" length. Thinking about pulling the trigger soon. The DCBs felt awesome too (but twice the price!).

7 iron 1.jpg

7 iron 2.jpg

:Sub70: 849D with Evenflow Riptide (stiff)

:taylormade-small: V Steel 3 & 5 woods

:Sub70: 699U 3 (19.5*) 

:Sub70: 939X 4H 

:Sub70:  699 (4-6) / 699 Pro (7-PW) with KBS Tour 120 shafts (stiff)

:Sub70: 286 Wedge (50 degrees)

:cleveland-small: 588 RTX 2.0 (56 degrees)

:EVNROLL: ER8v with Fujikura MC shaft (firm)

:maxfli: Tour 

:1590477705_SunMountain: 2023 2.5+ / :nike-small: University of Miami Stand Bag

:BagBoy: Nitron - Forum Test Review

:ShotScope: Pro L2

Garmin S10

Link to comment
Share on other sites

30 minutes ago, Hobert said:

Went to Golf Galaxy to get my numbers with a 7 iron (hit an Apex DCB). Based on this and my other info, Jason recommended a 699 (4-6)/699 Pro (7-pw) combo with KBS Tour 120 Stiff shafts and +1/4" length. Thinking about pulling the trigger soon. The DCBs felt awesome too (but twice the price!).

I play the 699 Pro's with KBS Tour V90 Stiff +1/4 inch in length. I can tell you you will love them. Been in the bag for two seasons and staying. I don't even look at other irons when they come out. Good luck on your decision. 

:titleist-small: Driver, TSi 1 S Flex

:cobra-small: 3 wood, Aerojet Max UST Helium Nanocore R Flex

:cobra-small: 5 wood, Aerojet Max UST Helium Nanocore R Flex 

:cobra-small: 7 Wood, Aerojet Max UST Helium Nanocore R Flex 

:cobra-small: 5 Hybrid King Tec MMT R Flex

:cobra-small: Irons, Tour UST Recoil 95 R Flex (6 - Gap)

:cobra-small: Wedges, Snakebite KBS Hi- Rev2.0 54* & 60*

:cobra-small: Agera 35"

image.png Ultralight 14-way Cart Bag

Link to comment
Share on other sites

6 minutes ago, Tom the Golf Nut said:

I play the 699 Pro's with KBS Tour V90 Stiff +1/4 inch in length. I can tell you you will love them. Been in the bag for two seasons and staying. I don't even look at other irons when they come out. Good luck on your decision. 

Very helpful. Thank you!

:Sub70: 849D with Evenflow Riptide (stiff)

:taylormade-small: V Steel 3 & 5 woods

:Sub70: 699U 3 (19.5*) 

:Sub70: 939X 4H 

:Sub70:  699 (4-6) / 699 Pro (7-PW) with KBS Tour 120 shafts (stiff)

:Sub70: 286 Wedge (50 degrees)

:cleveland-small: 588 RTX 2.0 (56 degrees)

:EVNROLL: ER8v with Fujikura MC shaft (firm)

:maxfli: Tour 

:1590477705_SunMountain: 2023 2.5+ / :nike-small: University of Miami Stand Bag

:BagBoy: Nitron - Forum Test Review

:ShotScope: Pro L2

Garmin S10

Link to comment
Share on other sites

I also should have pointed out that I sent Jason Hiland a note with my swing info from Golf Galaxy and asked if we could talk this week. He called me back the same day on a Sunday 

:Sub70: 849D with Evenflow Riptide (stiff)

:taylormade-small: V Steel 3 & 5 woods

:Sub70: 699U 3 (19.5*) 

:Sub70: 939X 4H 

:Sub70:  699 (4-6) / 699 Pro (7-PW) with KBS Tour 120 shafts (stiff)

:Sub70: 286 Wedge (50 degrees)

:cleveland-small: 588 RTX 2.0 (56 degrees)

:EVNROLL: ER8v with Fujikura MC shaft (firm)

:maxfli: Tour 

:1590477705_SunMountain: 2023 2.5+ / :nike-small: University of Miami Stand Bag

:BagBoy: Nitron - Forum Test Review

:ShotScope: Pro L2

Garmin S10

Link to comment
Share on other sites

38 minutes ago, Hobert said:

I also should have pointed out that I sent Jason Hiland a note with my swing info from Golf Galaxy and asked if we could talk this week. He called me back the same day on a Sunday 

Jason also did the same for me and he fit me to those shafts and lengths. Being in sales I know customer service is what it's all about. Sub -70 is all about the customer service. My bag keeps growing with their equipment.

:titleist-small: Driver, TSi 1 S Flex

:cobra-small: 3 wood, Aerojet Max UST Helium Nanocore R Flex

:cobra-small: 5 wood, Aerojet Max UST Helium Nanocore R Flex 

:cobra-small: 7 Wood, Aerojet Max UST Helium Nanocore R Flex 

:cobra-small: 5 Hybrid King Tec MMT R Flex

:cobra-small: Irons, Tour UST Recoil 95 R Flex (6 - Gap)

:cobra-small: Wedges, Snakebite KBS Hi- Rev2.0 54* & 60*

:cobra-small: Agera 35"

image.png Ultralight 14-way Cart Bag

Link to comment
Share on other sites

Pulled the trigger. Also going to demo the 849D. 😀

 

image.png.3996e795fd5fc6f38549985eb0d2b9c9.png

:Sub70: 849D with Evenflow Riptide (stiff)

:taylormade-small: V Steel 3 & 5 woods

:Sub70: 699U 3 (19.5*) 

:Sub70: 939X 4H 

:Sub70:  699 (4-6) / 699 Pro (7-PW) with KBS Tour 120 shafts (stiff)

:Sub70: 286 Wedge (50 degrees)

:cleveland-small: 588 RTX 2.0 (56 degrees)

:EVNROLL: ER8v with Fujikura MC shaft (firm)

:maxfli: Tour 

:1590477705_SunMountain: 2023 2.5+ / :nike-small: University of Miami Stand Bag

:BagBoy: Nitron - Forum Test Review

:ShotScope: Pro L2

Garmin S10

Link to comment
Share on other sites

@Tom the Golf Nut How do you like the JB wedge? I will have a big gap between my PW and my Cleveland 56* after I pull the X-20s from my bag.

:Sub70: 849D with Evenflow Riptide (stiff)

:taylormade-small: V Steel 3 & 5 woods

:Sub70: 699U 3 (19.5*) 

:Sub70: 939X 4H 

:Sub70:  699 (4-6) / 699 Pro (7-PW) with KBS Tour 120 shafts (stiff)

:Sub70: 286 Wedge (50 degrees)

:cleveland-small: 588 RTX 2.0 (56 degrees)

:EVNROLL: ER8v with Fujikura MC shaft (firm)

:maxfli: Tour 

:1590477705_SunMountain: 2023 2.5+ / :nike-small: University of Miami Stand Bag

:BagBoy: Nitron - Forum Test Review

:ShotScope: Pro L2

Garmin S10

Link to comment
Share on other sites

I know my irons will not be built in a day...but still I have checked my order status multiple times today. I guess I am excited. 🥳

:Sub70: 849D with Evenflow Riptide (stiff)

:taylormade-small: V Steel 3 & 5 woods

:Sub70: 699U 3 (19.5*) 

:Sub70: 939X 4H 

:Sub70:  699 (4-6) / 699 Pro (7-PW) with KBS Tour 120 shafts (stiff)

:Sub70: 286 Wedge (50 degrees)

:cleveland-small: 588 RTX 2.0 (56 degrees)

:EVNROLL: ER8v with Fujikura MC shaft (firm)

:maxfli: Tour 

:1590477705_SunMountain: 2023 2.5+ / :nike-small: University of Miami Stand Bag

:BagBoy: Nitron - Forum Test Review

:ShotScope: Pro L2

Garmin S10

Link to comment
Share on other sites

11 hours ago, Hobert said:

@Tom the Golf Nut How do you like the JB wedge? I will have a big gap between my PW and my Cleveland 56* after I pull the X-20s from my bag.

I actually like the JB Wedge as well. The sole grind allows you to open the face without lifting the face up higher. I got the 699 Pro gap wedge in my set which is at a standard 50 degree. Then I ordered the 56 degree JB wedge bent to 55 degree. I have a 60 CBX. So this bend in the JB gave me even gapping.

My only mistake was not waiting for the satin finish to be available at the time. I went with black and my OCD is having issues with scratches generated because the sand between the ball and club face. I was actually looking on line at lunch today for gunsmith refinishing blue except in black. 

:titleist-small: Driver, TSi 1 S Flex

:cobra-small: 3 wood, Aerojet Max UST Helium Nanocore R Flex

:cobra-small: 5 wood, Aerojet Max UST Helium Nanocore R Flex 

:cobra-small: 7 Wood, Aerojet Max UST Helium Nanocore R Flex 

:cobra-small: 5 Hybrid King Tec MMT R Flex

:cobra-small: Irons, Tour UST Recoil 95 R Flex (6 - Gap)

:cobra-small: Wedges, Snakebite KBS Hi- Rev2.0 54* & 60*

:cobra-small: Agera 35"

image.png Ultralight 14-way Cart Bag

Link to comment
Share on other sites

4 minutes ago, Hobert said:

I know my irons will not be built in a day...but still I have checked my order status multiple times today. I guess I am excited. 🥳

I’d probably be doing the same thing too!

In my  :wilson_staff_small:  carry bag:
:mizuno-small: ST-X 10.5* Kai'li Blue R Flex
:mizuno-small: ST-Z 15* Kai/li Blue R Flex
:mizuno-small: ST-Z 4h Linq Blue R Flex
:cleveland-small: Launcher 5h
:cleveland-small: Launcher CBX 6i-PW
:cleveland-small: CBX 54* & 58*
:cleveland-small: Huntington Beach #10
:bridgestone-small: e12 Contact
CURRENTLY TESTING - Mizuno Long Game

Link to comment
Share on other sites

5 minutes ago, Hobert said:

I know my irons will not be built in a day...but still I have checked my order status multiple times today. I guess I am excited. 🥳

Who wouldn't be excited with shiny new toys mere days away!

:titleist-small: Driver, TSi 1 S Flex

:cobra-small: 3 wood, Aerojet Max UST Helium Nanocore R Flex

:cobra-small: 5 wood, Aerojet Max UST Helium Nanocore R Flex 

:cobra-small: 7 Wood, Aerojet Max UST Helium Nanocore R Flex 

:cobra-small: 5 Hybrid King Tec MMT R Flex

:cobra-small: Irons, Tour UST Recoil 95 R Flex (6 - Gap)

:cobra-small: Wedges, Snakebite KBS Hi- Rev2.0 54* & 60*

:cobra-small: Agera 35"

image.png Ultralight 14-way Cart Bag

Link to comment
Share on other sites

3 minutes ago, Tom the Golf Nut said:

I actually like the JB Wedge as well. The sole grind allows you to open the face without lifting the face up higher. I got the 699 Pro gap wedge in my set which is at a standard 50 degree. Then I ordered the 56 degree JB wedge bent to 55 degree. I have a 60 CBX. So this bend in the JB gave me even gapping.

My only mistake was not waiting for the satin finish to be available at the time. I went with black and my OCD is having issues with scratches generated because the sand between the ball and club face. I was actually looking on line at lunch today for gunsmith refinishing blue except in black. 

A buddy and I were talking about black vs satin earlier today for this very reason...

:Sub70: 849D with Evenflow Riptide (stiff)

:taylormade-small: V Steel 3 & 5 woods

:Sub70: 699U 3 (19.5*) 

:Sub70: 939X 4H 

:Sub70:  699 (4-6) / 699 Pro (7-PW) with KBS Tour 120 shafts (stiff)

:Sub70: 286 Wedge (50 degrees)

:cleveland-small: 588 RTX 2.0 (56 degrees)

:EVNROLL: ER8v with Fujikura MC shaft (firm)

:maxfli: Tour 

:1590477705_SunMountain: 2023 2.5+ / :nike-small: University of Miami Stand Bag

:BagBoy: Nitron - Forum Test Review

:ShotScope: Pro L2

Garmin S10

Link to comment
Share on other sites

Congrats on the sticks you are going to love them.  As Tom the golf nut says, I don't even look at other clubs.  When I ordered mine it took about 3 1/2 weeks. I was trying to decide between T200's and 699 Pro's.  I don't second guess my decision one bit. My only issue is I went with a different fitter and not sure I got the correct shafts.  I'll be seeing Sub 70 at the end of the month to make sure I in fact have the correct shafts. If I ever need another new set they will also be sub 70. 

Sub 70 949 D 9* HZRUDS 60G 6.5 smoke RDX shaft. 

Sub 70 949X 4 wood ALDILA ABV 65-S shaft

Sub 70 699 Pro 4-AW 

Sub 70 3 utility 19*

Callaway 56 and 58 wedge. 

OG White Hot #1 putter

Link to comment
Share on other sites

51 minutes ago, JFish350 said:

Congrats on the sticks you are going to love them.  As Tom the golf nut says, I don't even look at other clubs.  When I ordered mine it took about 3 1/2 weeks. I was trying to decide between T200's and 699 Pro's.  I don't second guess my decision one bit. My only issue is I went with a different fitter and not sure I got the correct shafts.  I'll be seeing Sub 70 at the end of the month to make sure I in fact have the correct shafts. If I ever need another new set they will also be sub 70. 

I wish I could have headed to Sycamore in person, but I am a bit far away.  I am hopeful that Jason's recommendations via phone will work out well. I briefly thought about trying to go out there when I am in Chicago next week for work, but will have absolutely no time to do so.

:Sub70: 849D with Evenflow Riptide (stiff)

:taylormade-small: V Steel 3 & 5 woods

:Sub70: 699U 3 (19.5*) 

:Sub70: 939X 4H 

:Sub70:  699 (4-6) / 699 Pro (7-PW) with KBS Tour 120 shafts (stiff)

:Sub70: 286 Wedge (50 degrees)

:cleveland-small: 588 RTX 2.0 (56 degrees)

:EVNROLL: ER8v with Fujikura MC shaft (firm)

:maxfli: Tour 

:1590477705_SunMountain: 2023 2.5+ / :nike-small: University of Miami Stand Bag

:BagBoy: Nitron - Forum Test Review

:ShotScope: Pro L2

Garmin S10

Link to comment
Share on other sites

13 hours ago, Hobert said:

I wish I could have headed to Sycamore in person, but I am a bit far away.  I am hopeful that Jason's recommendations via phone will work out well. I briefly thought about trying to go out there when I am in Chicago next week for work, but will have absolutely no time to do so.

We do have a fitting cart in Creedmoor, NC just north of Durham as well. You may be able to set something up over there if necessary. You can find the fitting cart locations at https://www.golfsub70.com/sub-70-fitting-cart-locations/ Jason is VERY good at getting the right options/specs out to people even when it's over the phone though so hopefully you're good to go. If not, we'll help figure it out. Thanks!

Link to comment
Share on other sites

10 minutes ago, GolfSub70 said:

We do have a fitting cart in Creedmoor, NC just north of Durham as well. You may be able to set something up over there if necessary. You can find the fitting cart locations at https://www.golfsub70.com/sub-70-fitting-cart-locations/ Jason is VERY good at getting the right options/specs out to people even when it's over the phone though so hopefully you're good to go. If not, we'll help figure it out. Thanks!

Great info. Thank you!

:Sub70: 849D with Evenflow Riptide (stiff)

:taylormade-small: V Steel 3 & 5 woods

:Sub70: 699U 3 (19.5*) 

:Sub70: 939X 4H 

:Sub70:  699 (4-6) / 699 Pro (7-PW) with KBS Tour 120 shafts (stiff)

:Sub70: 286 Wedge (50 degrees)

:cleveland-small: 588 RTX 2.0 (56 degrees)

:EVNROLL: ER8v with Fujikura MC shaft (firm)

:maxfli: Tour 

:1590477705_SunMountain: 2023 2.5+ / :nike-small: University of Miami Stand Bag

:BagBoy: Nitron - Forum Test Review

:ShotScope: Pro L2

Garmin S10

Link to comment
Share on other sites

Looking forward to seeing what Sub70 has coming out this season and hopefully a few more in LH availability! 

⛳🛄 as of Nov 6, 2023 (Past WITB
Driver:  :callaway-small: Paradym TD w/ GD ADDI 6X Driver Shootout! 

Wood:    :cobra-small: F7 3 wood 14.5* w/ Motore F1 Shaft

Irons:   :titleist-small: T Series - T200 5 Iron
                                          T150 6-9 Iron
                                          T100 PW/GW

Wedge:  Toura Golf - A Spec 53,37,61 degree 

Putter:  Screenshot 2023-06-02 13.10.30.png Mezz Max!

Balls:     Vice Pro Plus Drip (Blue/Orange)

 

Link to comment
Share on other sites

20 hours ago, Hobert said:

I wish I could have headed to Sycamore in person, but I am a bit far away.  I am hopeful that Jason's recommendations via phone will work out well. I briefly thought about trying to go out there when I am in Chicago next week for work, but will have absolutely no time to do so.

I got lucky and able to parley my trip to see my daughter play lacrosse at college and have time to go see Sub 70.  Plus I am pretty sure their brew pub is open. 

Sub 70 949 D 9* HZRUDS 60G 6.5 smoke RDX shaft. 

Sub 70 949X 4 wood ALDILA ABV 65-S shaft

Sub 70 699 Pro 4-AW 

Sub 70 3 utility 19*

Callaway 56 and 58 wedge. 

OG White Hot #1 putter

Link to comment
Share on other sites

Finished rebuilding the used 699pro/639cb set I bought and took them to the range.  One for one yardage wise with the 4&5 iron with a negligible drop through the 639cbs (mostly due to slightly weaker loft).  Non standard lofts that came with the set.  I'll get them adjusted eventually.  +/- 5ish yards.  Nice Mid-high ball flight throughout the set that should be good for control. They're getting put in play for the Thursday and Friday tournaments I'm signed up for, wish me luck.

Driver

311062546_PXG_LogoSmall.jpg.1ff58b767d1fb1cdfeac9a387718766e.jpg  0811XT -- Tensei CK Orange 60

Woods

PXG_Logo Small.jpg 0211 3W -- Tensei AV Raw Blue

Hybrids

image.png.374545efa45a29aed00287677e783604.png  0317X 2&4 -- Tensei AV Raw Blue 

Irons 

:srixon-small: ZX7 4/AW -- C-Taper Lite 110

Wedges

:cleveland-small:  RTX Zipcore 56 Mid @55° -- TT DG Spinner

Putter

Test.png DF2.1 or Link.1 -- Accra

Ball

:srixon-small:  Zstar Diamond

 

Link to comment
Share on other sites

14 hours ago, Syks7 said:

Finished rebuilding the used 699pro/639cb set I bought and took them to the range.  One for one yardage wise with the 4&5 iron with a negligible drop through the 639cbs (mostly due to slightly weaker loft).  Non standard lofts that came with the set.  I'll get them adjusted eventually.  +/- 5ish yards.  Nice Mid-high ball flight throughout the set that should be good for control. They're getting put in play for the Thursday and Friday tournaments I'm signed up for, wish me luck.

Good Luck

Sub 70 949 D 9* HZRUDS 60G 6.5 smoke RDX shaft. 

Sub 70 949X 4 wood ALDILA ABV 65-S shaft

Sub 70 699 Pro 4-AW 

Sub 70 3 utility 19*

Callaway 56 and 58 wedge. 

OG White Hot #1 putter

Link to comment
Share on other sites

Let me tell you about Sub70, I too had read about them and I was looking for some new wedges, so I said what the heck. They have a "no questions asked" return policy, that you can return them within 60 days. I was so impressed with the wedges, that I ordered a set of 5-A 699 irons. They felt great, but I hit them way too high. I called them and spoke directly to Jason and he and I talked a length about my game. We went over my current irons PXG and the shafts in them and he gave me some recommendations. I went with an upgrade to the AeroTech Steel Fiber I70. They paid for my shipping both ways andI got them back in less than 2 weeks. They are sweet, much better than my PXG's, which I sold. I have since ordered their 849D driver, sold my  Ping 425 and last week I got their 005 Wide Blade putter, so solid. Their customer service is the BEST in the industry. They answer the phone and work with you. I have gotten a personal note, hat, ball marker and stickers on every order I have placed. Check them out, they also have a demo program for trying their products if you don't want to purchase without trying. I'm a Lefty  and didn't have as much to chose from, but I'm telling you, if you are not hung up on having "name brand" equipment, their products are top of the line.

 

Taylor Made Stealth 2  Driver with ACCURA Senior flex, 42.5 grams

Ping G415 3 Wood

Callaway Epic 5 Wood

Ping G415 22* Hybrid

Sub70 699 irons

Aerotech Steel Fiber I70 graphite shafts an NO1 50 grips

Sub70 286 Forged wedges 54* and 60*

Scotty Cameron Phantom X putter with oversized Sweet Rollz grip

True Pro Lux and True Links Knit shoes

 

Link to comment
Share on other sites

I've been following the Sub70 posts on this site for a while and finally decided to pull the trigger. I purchased a 949X 3 wood a couple weeks ago. I've played a few rounds with it and am very satisfied with the quality and functionality of the club. I chose an Evenflow Riptide (Black) shaft. They have a variety of stock shafts to choose from. The club is adjustable and has movable weights. There is a 60 day, full refund period, so there's really no risk. They also have a demo program that is really reasonable. All in all, great bang for the buck, so much so, I plan on picking up their 5 wood. The CS is excellent as well. 

Link to comment
Share on other sites

I have a Sub70 putter in my bag that I self-fit into and love it. I wanted a heavier head as my tendency is to go offline on the backswing and the Sycamore 002 Mid-mallet fit the bill. It was assembled and shipped quickly. The one thing I wish I would have done was review the options more thoroughly as I should have selected a larger grip. I have since purchased one which made all the difference for me.  I also tried their demo program for the 699 Pro irons and liked what I tried, but didn't find much difference between them and my then-current gamers (2017 TM M1), so I stuck with what I had. It is likely that more Sub70 clubs will be in my bag at some point.

  • TaylorMade Stealth2+ 9° - Fujikura Ventus Black VeloCore 5-S
  • TaylorMade M5 15° - Fujikura Ventus Black VeloCore 6-S
  • Callaway CF-18 18° - KBS Tour Prototype 85 S
  • Srixon 4-AW Nippon Modus 3 105 R
  • Cleveland ZipCore 54° Mid and 58° Mid DG Spinner
  • Scotty Cameron Super Select Newport 2 35"
  • Titleist Pro V1
  • Arccos Gen 3 sensors
Link to comment
Share on other sites

That was fast!🤩

358696241_Screenshot_20220310-1041192.png.5b00e3c8326e7061156670db96c12d7f.png

 

:Sub70: 849D with Evenflow Riptide (stiff)

:taylormade-small: V Steel 3 & 5 woods

:Sub70: 699U 3 (19.5*) 

:Sub70: 939X 4H 

:Sub70:  699 (4-6) / 699 Pro (7-PW) with KBS Tour 120 shafts (stiff)

:Sub70: 286 Wedge (50 degrees)

:cleveland-small: 588 RTX 2.0 (56 degrees)

:EVNROLL: ER8v with Fujikura MC shaft (firm)

:maxfli: Tour 

:1590477705_SunMountain: 2023 2.5+ / :nike-small: University of Miami Stand Bag

:BagBoy: Nitron - Forum Test Review

:ShotScope: Pro L2

Garmin S10

Link to comment
Share on other sites

The maiden round with the 639cb/699pros didn't go as well as I'd hoped.  None of it was the fault of the irons though. Approach and iron play was excellent, I just had a few Stupids off the tee, with the putter, and with the wedges.  Love the feel & (feedback) of the 639cbs and the top end of the bag 4 and 5 iron 699 pros are rocket launchers.  Can't wait to play again tomorrow.

Driver

311062546_PXG_LogoSmall.jpg.1ff58b767d1fb1cdfeac9a387718766e.jpg  0811XT -- Tensei CK Orange 60

Woods

PXG_Logo Small.jpg 0211 3W -- Tensei AV Raw Blue

Hybrids

image.png.374545efa45a29aed00287677e783604.png  0317X 2&4 -- Tensei AV Raw Blue 

Irons 

:srixon-small: ZX7 4/AW -- C-Taper Lite 110

Wedges

:cleveland-small:  RTX Zipcore 56 Mid @55° -- TT DG Spinner

Putter

Test.png DF2.1 or Link.1 -- Accra

Ball

:srixon-small:  Zstar Diamond

 

Link to comment
Share on other sites

7 hours ago, Syks7 said:

The maiden round with the 639cb/699pros didn't go as well as I'd hoped.  None of it was the fault of the irons though. Approach and iron play was excellent, I just had a few Stupids off the tee, with the putter, and with the wedges.  Love the feel & (feedback) of the 639cbs and the top end of the bag 4 and 5 iron 699 pros are rocket launchers.  Can't wait to play again tomorrow.

Good luck today!

:Sub70: 849D with Evenflow Riptide (stiff)

:taylormade-small: V Steel 3 & 5 woods

:Sub70: 699U 3 (19.5*) 

:Sub70: 939X 4H 

:Sub70:  699 (4-6) / 699 Pro (7-PW) with KBS Tour 120 shafts (stiff)

:Sub70: 286 Wedge (50 degrees)

:cleveland-small: 588 RTX 2.0 (56 degrees)

:EVNROLL: ER8v with Fujikura MC shaft (firm)

:maxfli: Tour 

:1590477705_SunMountain: 2023 2.5+ / :nike-small: University of Miami Stand Bag

:BagBoy: Nitron - Forum Test Review

:ShotScope: Pro L2

Garmin S10

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...