Jump to content

DIY Overspeed Training Sticks - Photos and Materials List


Recommended Posts

Our Sponsors

I decided to make my own as I was never going to be able to justify the cost.

I ordered 3 Grafalloy Prolaunch Stiff shafts for under $10, shipping was free as I combined them with another purchase.  I had the grips already after a cheap bulk purchase. 

For the weights I used 304 1 inch stainless rod that my father in law had lying around. He's got about 30 feet of it left, so I might go into business.

The steel was rough cut with a drop saw, then drilled out (8.5mm bit) and machined down to final weight. We chamfered the hole and edges to smooth things up a bit.

IMG_0501.JPG.fa696ee8458356cef97652d9f21839b4.JPG

I purchased a radar locally, which is by far the most expensive part of my setup.

 

Having access to materials and a skilled machinist made this a relatively easy job.

IMG_0549.JPG.767133e9b40eb5b97aeceb88a941cbe0.JPG

IMG_0550.thumb.JPG.b67b0bba38a8109d709f23efb5deeec4.JPG

IMG_0553.JPG.69a248a679b0d30b4c8f407e3b7bb802.JPG

 

 

IMG_0555.JPG.ad0b257039e35af066a26aeeee166195.JPG

Weights were then glued on with maximum strength epoxy.

Total cost, including radar was USD160.

 

Now I need to get swinging.

  • Like 4
  • Love 2

:ping-small:  G400 SFT with Aldila Xtorsion Copper Stiff
:cobra-small: F8 3 & 5 Woods with Project X Evenflow Blue 6.0

:cobra-small: F8 4 Hybrid
:mizuno-small:  MP18 MMC - Project X LZ 5.5
:mizuno-small: S18 Wedges 50,54,58
MLA Tour Mallet 33"
:srixon-small:  Z Star
:ping-small: Pioneer bag
:Clicgear: buggy

Link to post
Share on other sites
  • Replies 59
  • Created
  • Last Reply

Top Posters In This Topic

Top Posters In This Topic

Popular Posts

Hi everyone, With inspiration from several on here, here's my build of two sets of DIY Overspeed training sticks, matched as close to the specs for the SuperSpeed sticks as I could get. I've

I decided to make my own as I was never going to be able to justify the cost. I ordered 3 Grafalloy Prolaunch Stiff shafts for under $10, shipping was free as I combined them with another purchas

Some of you guys have some time on your hands. I could use some help putting grips on about 300 clubs. 2 beers an hour, 3 if your over 250lbs 🙂 Nice looking work folks.

Posted Images

@Peaksy68 those look LEGIT!! I'd buy them haha

Charleston, SC

HDCP 12.0

  • Driver: :taylormade-small:  M6 9* with 65g Stiff Mitsubishi Tensei Red shaft
  • 3 wood: :taylormade-small:  M4 with 60g Atmos red stiff shaft
  • 4-gw irons:  :mizuno-small: JPX 921 Hot Metal w/ X-stiff KBS 130gr shafts (soft stepped)
  • Wedges: 52, 56, 60 :titelist-small: SM5 & SM6
  • Putter: 34" :odyssey-small: 2-ball original with superstroke grip
  • Tracked By: :Arccos:

MGS Tester '20 - :ping-small: G710 Iron Review

MGS Tester '19 - :918457628_PrecisionPro:Precision Pro NX9 HD Pro laser rangefinder

Link to post
Share on other sites
  • 4 months later...

So several of you built the speed trainer...What were your results of using? Before/After swing speeds?

Epic Flash 9 &15

Titliest 915 18&21

Staff 5 to G

Ping SW

Wide Flange LW

TM Spider X

 

Link to post
Share on other sites
On 7/15/2019 at 9:56 PM, Peaksy68 said:

I decided to make my own as I was never going to be able to justify the cost.

I ordered 3 Grafalloy Prolaunch Stiff shafts for under $10, shipping was free as I combined them with another purchase.  I had the grips already after a cheap bulk purchase. 

For the weights I used 304 1 inch stainless rod that my father in law had lying around. He's got about 30 feet of it left, so I might go into business.

The steel was rough cut with a drop saw, then drilled out (8.5mm bit) and machined down to final weight. We chamfered the hole and edges to smooth things up a bit.

IMG_0501.JPG.fa696ee8458356cef97652d9f21839b4.JPG

I purchased a radar locally, which is by far the most expensive part of my setup.

 

Having access to materials and a skilled machinist made this a relatively easy job.

IMG_0549.JPG.767133e9b40eb5b97aeceb88a941cbe0.JPG

IMG_0550.thumb.JPG.b67b0bba38a8109d709f23efb5deeec4.JPG

IMG_0553.JPG.69a248a679b0d30b4c8f407e3b7bb802.JPG

 

 

IMG_0555.JPG.ad0b257039e35af066a26aeeee166195.JPG

Weights were then glued on with maximum strength epoxy.

Total cost, including radar was USD160.

 

Now I need to get swinging.

Wow that's quite the home project! Wish I had the skills, patience and tools to do that.

Left Hand orientation

:ping-small: G410 SFT driver 

Cobra F Max 5 wood
:ping-small:  410  Hybrids 22*, 26*

Cobra Speed Zone 6-GP/Recoil ESX 460 F3 Shafts 

:titelist-small: SM7 54* Wedge

:ping-small: Glide 3.0  60* Wedge

:odyssey-small: O Works putter
:918457628_PrecisionPro:NX9-HD

:CaddyTek: - 4 Wheel 
:footjoy-small: - too many shoes to list and so many to buy

:1590477705_SunMountain: And  BAG Boy 

2020 Official Tester :SuperSpeed: Beginning Driver Speed  - 78

2019 Official Tester :ping-small:  410 Driver

2018 Official Tester :wilson-small: C300

Link to post
Share on other sites
Hi everyone,
With inspiration from several on here, here's my build of two sets of DIY Overspeed training sticks, matched as close to the specs for the SuperSpeed sticks as I could get.
I've included photos of the process and the price/materials list for my build. I ended up building a second set for my brother-in-law as the additional set was really only the additional cost of the shafts.
Diamond Tour Golf

(1) Water-Activated Grip Tape Strips, 13 Pack - $4.99
(1) 24hr 8oz Epoxy Kit - $13.49
(6) DTG Velvet 360 Grip - $1.49/each = $8.94
(6) Adams/Graffalloy SuperShaft - $4.99/each = $29.94
(1) 1/2" Wood Ferrules, 12 Pack - $3.49
Shipping and Handling - $9.99
DTG Total - $70.84

Home Depot

Colored Vinyl Electrical Tape - $4.98
(2) #8-32 2" Pan Head Stainless Steel Machine Screws, 4 Pack - $2.36
(1) #8 Stainless Steel Fender Washers, 8 Pack - $1.18
(1) 5/16" Zinc Fender Washers, 100 Pack - $14.28
(1) J-B Weld 1oz Twin Tube Cold Weld Epoxy - $4.97
(1) 14.5oz Black Plasti Dip - $6.98
6% Michigan Sales Tax - $2.09
Home Depot Total - $36.84
Overall Total for Two Sets - $107.68
1) I started with the grips. I found using dish soap helped immensely with the water activated grip tape.
xIcj5kz.jpg
qviwBKu.jpg
mOVpr7e.jpg
2) Instead of using different colored grips (which seemed to have different weights), I wanted to keep it simple with identical grips throughout the set. Instead, I chose to make the different weights with colored electrical tape. This step is purely optional. I used a wrap of blue painter's tape that I had on hand to space out the tape evenly from the grips.
CTDjEcm.jpg
o2bZW58.jpg
dzRR3TS.jpg
3) I found that #8 bolts fit almost perfectly inside of the end of the Adams shafts I ordered. I purchased #8 fender washers and JB-Welded the washers and bolts together to form the "stop" at the end of the shaft. This helps hold the 5/16" washers I used for weight in place.
mRgS15V.jpg
O6KPB6R.jpg
hB6p22G.jpg
4) 5/16" washers make up the weights. In an ideal world, I'd rather have machined something from round stock, but without easy access to a lathe or mill this made the most sense. I, of course, failed to record the number of washers needed for ideal weights. However, my notes do say seven of the washers weighed between 79 and 80 grams. I carefully JB-Welded the washers to each other so they would be a single mass. This was tricky because I needed them to be pretty near perfect to fit over the end of the shaft.
4K0KKZg.jpg
eVjIPmN.jpg
f4bDBQa.jpg
5) I have no picture, unfortunately, but I club epoxied the bolt/washer combination to the end of the shafts and allowed it to cure. I lightly abraded the interior of the shaft with some 100 grit sandpaper.
6) I also abraded the end of the shafts where the washers were to be epoxied with 100 grit sandpaper. I then club epoxied the washer weights into place and allowed them to cure hanging down (a jig made from scrap 2x4).
CXXNijO.jpg
o7AHYn0.jpg
PND6w33.jpg
7) I applied two coats of Plasti-Dip to the washer end. This made up for a few remaining grams of weight I needed and added a slightly more finished appearance.
ugwKwiy.jpg
All in all, I managed to get within two grams of the SuperSpeed specs on all six sticks I made (2 of each weight). I am very happy with how they turned out. The only thing I might change is to forgo buying the separate club epoxy and use JB-Weld for everything. The PSI rating of the JB-Weld far exceeds the club shafting epoxy, and I see no reason why I'd ever need to remove the heads. 
My only concern in this design is the bolts inside of the shaft. I doubt the shafts are designed for their being a mass inside of the shaft pressing outward (when swinging) and I've read plenty about just epoxy inside of shaft tip weakening the shaft.
I just wanted to pass along the materials list and procedure I used in case anyone else was looking at doing the same. Hope this helps someone.
 
 

Just saw this, nice job


Sent from my iPhone using MyGolfSpy
  • Like 1

Rick

 

 

Left Hand, 

Driver; Ping G410 Plus

5 Wood; Cally Steelhead 

5 Hybrid; Cally Steelhead

Irons; Ping G410 5-SW & Mizno 919 Hot Metal 5-SW

Putter; Waaay too many to list

Link to post
Share on other sites
22 hours ago, Flog4 said:

So several of you built the speed trainer...What were your results of using? Before/After swing speeds?

I've been tracking over in the official thread, where they welcomed us non-participants and DIYers to post as well:

I have gotten (much) faster. Now, I've also been changing my swing over the past year since starting to take golf seriously, so I'm sure that is responsible for a lot of progress as well. But, since raw numbers are fun to post, I started last winter swinging a driver between 95-100 MPH. My goal by the end of next season is to see that number closer to 110-115 MPH. When swinging well this past summer, I was around 103-108 MPH.

I haven't been measured on a Trackman in a long time, I am hoping to go again in a few weeks. 

My ultimate goal is to exceed 170 MPH ball speed with the driver.

  • Like 1
  • Love 1

Unofficial WHS Handicap: 9.7 (Last Updated Nov. 27, 2020)

Driver: cobra_logo.png.190908c8b4518eec87c087429e4343ee.png Cobra SpeedZone Xtreme (9°, set to Draw), 44.5", Aldila Rogue Silver 60 (110 MSI) Stiff
17° Hybrid:
callaway_logo.png.3dd18aa65544000dd0ea3901697a8261.png Callaway Super Hybrid, 41.5", Mitsubishi Tensei CK Pro Orange 80 Hybrid Stiff
19° Driving Iron: 
cobra_logo.png.190908c8b4518eec87c087429e4343ee.png Cobra SpeedZone 4 Iron, 2° Flat, 39.75", X-Caliber Rapid Taper 75g Stiff
22° Hybrid:
cobra_logo.png.190908c8b4518eec87c087429e4343ee.png Cobra KING F8, 38.5", Aerotech Steelfiber i95 Stiff
5-GW:  
maltby_logo.png.c889f4bebd3ab94fe9c37e77ba6c0c55.png Maltby PTM Chrome, 1° Flat, 37" 7 Iron, KBS C-Taper Lite 110 Stiff
54°, 58°:
cobra_logo.png.190908c8b4518eec87c087429e4343ee.png Cobra KING MIM Black, 3° Flat, -1/2" (54°), -1/4" (58°), KBS C-Taper Lite 115 X-Stiff
Putter:
image.png.49fcc172a1ed0010d930fbe1c5dc8b79.png L.A.B. Golf DF 2.1, 36", 68°, Black with Custom Sightlines, BGT Stability Tour, L.A.B. Press II 3°
Ball: :Snell:Snell MTB-X Optic Yellow

Tracked By: :Arccos: Arccos / Cobra Connect
Bag: :1590477705_SunMountain: Personalized 2020 Sun Mountain Sync
Riding On: :CaddyTek: CaddyTek Caddylite EZ V8

2020 Participant #CobraConnect Challenge | 2019 Reviewer Callaway Epic Flash Driver

Link to post
Share on other sites
  • 5 weeks later...

54 year old guy with about a 90mph swingspeed. Used to be about 97mph. 5' tall doesn't offer much in the way of long arms for leverage. 

So I've got to get more speed. I removed the 20 year old driver head with a heat gun and took the shaft to HD. None of the threaded rods fit very well so I came back to this thread again. The ferrule remained on the shaft and it looks like there is an insert in the shaft. If I could have fit a threaded rod in the insert it would have only gone in maybe just over an inch. So does this.. what I am calling insert need to be removed via heat or cutting it out?

Link to post
Share on other sites
10 hours ago, pauly99 said:

54 year old guy with about a 90mph swingspeed. Used to be about 97mph. 5' tall doesn't offer much in the way of long arms for leverage. 

So I've got to get more speed. I removed the 20 year old driver head with a heat gun and took the shaft to HD. None of the threaded rods fit very well so I came back to this thread again. The ferrule remained on the shaft and it looks like there is an insert in the shaft. If I could have fit a threaded rod in the insert it would have only gone in maybe just over an inch. So does this.. what I am calling insert need to be removed via heat or cutting it out?

do you have a picture to better explain? thx

Charleston, SC

HDCP 12.0

  • Driver: :taylormade-small:  M6 9* with 65g Stiff Mitsubishi Tensei Red shaft
  • 3 wood: :taylormade-small:  M4 with 60g Atmos red stiff shaft
  • 4-gw irons:  :mizuno-small: JPX 921 Hot Metal w/ X-stiff KBS 130gr shafts (soft stepped)
  • Wedges: 52, 56, 60 :titelist-small: SM5 & SM6
  • Putter: 34" :odyssey-small: 2-ball original with superstroke grip
  • Tracked By: :Arccos:

MGS Tester '20 - :ping-small: G710 Iron Review

MGS Tester '19 - :918457628_PrecisionPro:Precision Pro NX9 HD Pro laser rangefinder

Link to post
Share on other sites

Ok. Drilled through the opening and I think I've gone through some gunked up glue/epoxy and can easily put the drill bit through a few inches. I now need to find the correct threaded rod.

Link to post
Share on other sites
Ok. Drilled through the opening and I think I've gone through some gunked up glue/epoxy and can easily put the drill bit through a few inches. I now need to find the correct threaded rod.
Are you planning to do the washer route or solid weight?
If you are using washers just get a bolt with that diameter and use one with a big head to hold washers.
Good luck I have been using miss without any issue for the last 3-4 months and it's been flawless.

Using MyGolfSpy mobile app

Driver:  Ben Hogan GS53
3W:  Callaway Big Bertha Steelhead 2
2i: Maltby KE4 FDI 
4-PW:  Maltby TS-1 - C-Taper 120g 
50º: Maltby TSW

56º:  Cleveland RTX-2 
60º: Maltby Tour Grind MG
Putter:  Odyssey White Hot RX 2-ball

Ball: Snell MTB X
Other: Game Golf Live
Handicap: 5.9  -  Best Score: 73 (1 over) Bryan Park - Players Course, Greensboro NC -2020

2020 MGS Forum Tester - Ben Hogan GS53 Driver

Link to post
Share on other sites
1 hour ago, pozzit said:

Are you planning to do the washer route or solid weight?
If you are using washers just get a bolt with that diameter and use one with a big head to hold washers.
Good luck I have been using miss without any issue for the last 3-4 months and it's been flawless.
 

I will be using washers. HD didn't have the threaded rod I needed so I'll check out Menards tomorrow. Picked up some Gorilla epoxy as well as Plasti Dip. Looking forward to getting this going. I'm assuming you used the bolt (screw head) instead of a wingnut and just epoxied everything in?


 

 

Link to post
Share on other sites

Yep and epoxied the hell out of it. was a little worried about them flying off but have had no issues. I just used JB weld so gorilla epoxy should be perfect.

Driver:  Ben Hogan GS53
3W:  Callaway Big Bertha Steelhead 2
2i: Maltby KE4 FDI 
4-PW:  Maltby TS-1 - C-Taper 120g 
50º: Maltby TSW

56º:  Cleveland RTX-2 
60º: Maltby Tour Grind MG
Putter:  Odyssey White Hot RX 2-ball

Ball: Snell MTB X
Other: Game Golf Live
Handicap: 5.9  -  Best Score: 73 (1 over) Bryan Park - Players Course, Greensboro NC -2020

2020 MGS Forum Tester - Ben Hogan GS53 Driver

Link to post
Share on other sites
19 hours ago, pozzit said:

Yep and epoxied the hell out of it. was a little worried about them flying off but have had no issues. I just used JB weld so gorilla epoxy should be perfect.

Slow but sure now. I have a new player as of mid last year with the Cobra F8 and that weighs in at 315 grams. My previous TaylorMade Burner Superfast came in at 296 grams. Wow. It felt like the Cobra F8 was heavier but I didn't realize by that much. Hmmmmm. Either way I hit it better so I'll be basing the medium weight on that club.

  • Like 1
Link to post
Share on other sites

This thread inspired me to make my own training stick.  Just purchased the first of the materials yesterday.  I'm going to try and incorporate some of my favorite ideas from this thread and can't wait to show you guys how it turns out.

  • Like 1

Sean K.

Driver: :callaway-small: Great Big Bertha, 10.5o, -1"
Wood: :srixon-small: Z-F85, 3W, 15o
Hybrids: :titelist-small: 818 H1, 19o
Irons: :mizuno-small: JPX 919 Hot Metal 4-GW
Wedges: :cleveland-small: CBX 2.0 55o, 60o
Putter: :1332069271_TommyArmour: Tour Impact No. 3
Ball: :srixon-small: Z Star

2017 Vice Pro Forum Review
2019 Tommy Armour Tour Impact No.3 Forum Review

Link to post
Share on other sites
3 hours ago, skrupa15 said:

This thread inspired me to make my own training stick.  Just purchased the first of the materials yesterday.  I'm going to try and incorporate some of my favorite ideas from this thread and can't wait to show you guys how it turns out.

Good luck! I still use my set regularly and have had no issues with the weights so far. The grips, however, will need to be replaced at sometime in the near future. I will probably splurge for Star Sidewinders when I do that. 

Unofficial WHS Handicap: 9.7 (Last Updated Nov. 27, 2020)

Driver: cobra_logo.png.190908c8b4518eec87c087429e4343ee.png Cobra SpeedZone Xtreme (9°, set to Draw), 44.5", Aldila Rogue Silver 60 (110 MSI) Stiff
17° Hybrid:
callaway_logo.png.3dd18aa65544000dd0ea3901697a8261.png Callaway Super Hybrid, 41.5", Mitsubishi Tensei CK Pro Orange 80 Hybrid Stiff
19° Driving Iron: 
cobra_logo.png.190908c8b4518eec87c087429e4343ee.png Cobra SpeedZone 4 Iron, 2° Flat, 39.75", X-Caliber Rapid Taper 75g Stiff
22° Hybrid:
cobra_logo.png.190908c8b4518eec87c087429e4343ee.png Cobra KING F8, 38.5", Aerotech Steelfiber i95 Stiff
5-GW:  
maltby_logo.png.c889f4bebd3ab94fe9c37e77ba6c0c55.png Maltby PTM Chrome, 1° Flat, 37" 7 Iron, KBS C-Taper Lite 110 Stiff
54°, 58°:
cobra_logo.png.190908c8b4518eec87c087429e4343ee.png Cobra KING MIM Black, 3° Flat, -1/2" (54°), -1/4" (58°), KBS C-Taper Lite 115 X-Stiff
Putter:
image.png.49fcc172a1ed0010d930fbe1c5dc8b79.png L.A.B. Golf DF 2.1, 36", 68°, Black with Custom Sightlines, BGT Stability Tour, L.A.B. Press II 3°
Ball: :Snell:Snell MTB-X Optic Yellow

Tracked By: :Arccos: Arccos / Cobra Connect
Bag: :1590477705_SunMountain: Personalized 2020 Sun Mountain Sync
Riding On: :CaddyTek: CaddyTek Caddylite EZ V8

2020 Participant #CobraConnect Challenge | 2019 Reviewer Callaway Epic Flash Driver

Link to post
Share on other sites

Finished. I can clean it up a bit but ugly still works. I epoxied the HE double hockey stick out of it but I think I'll still give it a swing for a while in the garage area as I don't want it to go through the neighbors windows. Now to measure a starting mph point with the Cobra F8 and starting point with the speed... what the heck are we calling this?

Thank you very much for the tips.  

 

20200104_075647.jpg

20200104_075623.jpg

  • Like 4
Link to post
Share on other sites
  • 3 months later...

I love DIY projects like this.  Very cool idea.

  • Like 1
  • TaylorMade R15 460cc w/ Fujikura Speeder 661 Evolution Tour Spec R
  • TaylorMade R11 5 Wood w/ Fujikura Motore Speeder VC 6.0 S
  • Mizuno JPX 850 Forged 4-GW w/ True Temper XP 105 S300
  • Titleist Vokey SM5 54* F Grind
  • Titleist Vokey SM5 58* M Grind
  • SeeMore Original FGP w/ SuperStroke 1.0 Flatso

Tennessee

Link to post
Share on other sites
  • 3 weeks later...

Amazing work.  Congratulations!

Driver: :callaway-small: XR16 Aldila Tour Green XS

3wood: :callaway-small: XR16 Project X LZ Handcrafted 6.5

Hybrid 19º: :callaway-small: XR OS Fubuki S

Irons 4-5: :titelist-small: 718 AP3 Project X LZ 6.0

Irons 6-P: :titelist-small: 718 AP2 Project X LZ 6.0

Wedges: :titelist-small: Vokey Design SM7, 50º 55° 60º

Putter: :taylormade-small: Spider X Navy

Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...