COBRA GOLF’S NEW KING FORGED TEC IRONS OFFER BETTER PLAYERS A POWERFUL COMBINATION OF ACCURACY, FEEL, DISTANCE AND FORGIVENESS IN AN EYE-CATCHING DESIGN
The KING Forged TEC Irons Combine Classic Shaping with Distance & Forgiveness In Variable and ONE Length Designs
COBRA Golf today introduced its next generation of KING Forged TEC Irons, featuring a traditional muscle-back shape with a hollow design for softer feel and improved power preferred by better players, available in a variable or ONE Length set make-up. Fusing a classic look with modern, cutting-edge face, finish and feel technologies, the KING Forged TEC irons provide golfers with the ideal balance of precision and distance.
A sleek, muscle-back shape and sophisticated design of the Forged TEC Irons encloses an unassuming hollow body that delivers low CG and helps maximize distance, forgiveness and playability. A hollow cavity is infused with energizing foam microspheres that fine-tune acoustics and create the softer feel that better players desire while supporting a thin PWRSHELL Face for increased ball speeds. An updated forged face insert creates a larger Sweet Zone and return area for higher launch and faster ball speeds in a players iron. A tungsten toe weight centers the CG behind the hitting zone to maximize distance and increase precision for attacking pins, even on off-center hits.
Like a majority of COBRA equipment, the Forged TEC irons will feature the innovative COBRA CONNECT™ Powered by Arccos allowing users to track their accuracy and distance using the Arccos Caddie app on a smart device. Electronically embedded sensors in the grip automatically record the distance and accuracy of every shot so golfers can track their improvements round-to-round.
The KING Forged TEC ONE Length irons offer an added dimension of consistency, as COBRA engineers have manipulated the design of each iron to match the weight and length of a 7-iron, allowing for one simple, repetitive set up and swing motion to reduce variability and increase consistency between clubs. This is primarily achieved through matching 7-iron head and swing weights in every iron to create a consistent feel throughout the set. Weight is added to the ONE Length long irons to compensate for shorter (37.50”) shafts and to match 7-iron swing weight, while weight is removed from the short irons & wedges to compensate for longer shafts while still delivering traditional 7-iron swing weight. In addition, lie angles have been adjusted to optimize ball flight in a ONE Length set configuration. Long irons utilize more upright lie angles, while the short irons and wedges have slightly flatter lie angles delivering more consistent trajectory and ball flights. Lighter long iron shafts encourage easy launch while heavier wedge shafts promote more control into and around the green.
The Forged Tec ONE Length irons are available through stock in an 7-piece (4-PW) set in stiff and regular, in both right and left-handed versions (graphite is available through custom in x-stiff, stiff and regular). The steel version come equipped with a KBS $-Taper Lite (115- stiff, 110 – reg, 120 – wedge) shaft with Lamkin Crossline COBRA CONNECT grips in a blue colorway.
The Forged Tec variable length irons (MAP: $1,099 steel; $1,199 graphite) are available through stock in an 8-piece (4-GW) set in both right and left-hand versions. The steel KBS $-Taper Lite shaft is offered in both regular (R110) and stiff (S115) flexes. Graphite offerings in Project X Catalyst 80 in regular, stiff and x-stiff flexes are available through custom only. Each set comes stock with Lamkin Crossline COBRA CONNECT grips in black.
The Forged Tec irons in variable and ONE Length will be available at retail and at cobragolf.com beginning November 1, 2019. For more information on the entire KING family of products, visit cobragolf.com.
The First Look Article by our Chris Nickel can be read here Cobra Forged Tec First Look
My son bought me a Ping g400 driver for christmas last year. Great club and I hit it way farther than my old BB, but only if I de-loft it to 9.5 (big minus setting), slow my swing down a bit and play it back in my stance (de-loft some more). Of course, anything other perfect timing and its either snap hook or balloon like crazy. The shaft is an Alta 55 soft regular. I'm thinking this shaft is a little too soft for my swing (swing speed =95 mph). Here's where the bling squirrel comes in, in Springfield ,IL your only options for anything Ping is Dick's or Scheels. Both are woefully lacking in any type of shaft to demo (each had 1 Alta in stiff only), so I'm here looking for any suggestions. Thanks in advance.
I was previously playing with a taylormade R15 driver 10.5° for which I was hitting terrible 90% of the time(hooks, slices and short) . This was before I realised what shaft flex it was so when I checked the shaft I realised it was a L flex. I was able to trade it in for a stiff flex Titleist 915 D2 driver and this sorted my problems out. What flex shaft do you use? Do other shafts mess your tee shots up? Let me know 🙂
Hey everyone! new member/first post here so bear with me!
Callaway (unknown model) Grey Goose stand bag (looks awesome, purchased from PlayItAgain)
Cobra F7 Driver - Stiff 60g Fukijura shaft - Garfield "Born 2 Birdie" Headcover
Callaway Rouge 3 wood - Adila Synergy Regular shaft
Cobra F7 5 wood - Regular Fukijura shaft - My old Callaway Diablo 3 wood Headcover
TaylorMade TP Rescue 4/22* - I'm not sure how old this is, I am in the market for something new
Cobra F8 Iron set 5-GW - Regular flex TrueTemper XP90 shafts
Ping Tour-S 54*/12* bounce wedge - KBS Tour Shaft
Adams Tom Watson 58*/8* bounce wedge - Adams branded shaft
Tommy Armour Impact #3 Putter - 35" Black painted shaft
I think the next things to be replaced are the Rescue, then the wedges, then the driver. I also have the 38" Counterbalanced TA putter I have used twice if anyone is interested! Enjoy the pictures: