Jump to content

Recommended Posts

Our Sponsors

So, PXG released 0211 irons.

A progressive size head set (4i XF -> then P size head) with the same foam inside but the whole club is cast. 

At half the price of the current lineup ($200/head).

What do you guys think?

Pic:

 

Share this post


Link to post
Share on other sites

Seems very un PXG 

  • Like 1

In my :mizuno-small: BR-D4 Stand Bag

:ping-small: G410 Plus Ping 9* VA Nemesys 65FIVE
:ping-small: G410 LST 14.5* VA Vylyn 75FIVE
:titelist-small: 818 H2 20* Tour AD DI 85X
:mizuno-small: MP20 HMB 4 Tour AD 95X
:mizuno-small: JPX 919 Tour 5-PW Oban CT 115 X(-)
:titelist-small: Vokey SM7 49 F - 54 S - 59 D
:mizuno-small: M Craft II
:bridgestone-small: Tour B X
 
SuperSpeed Forum Tester
Initial Driver Speed on Provided Monitor: 109 MPH
 

Share this post


Link to post
Share on other sites

Not bad, but not sure I’d like to see different sized heads along a set. I’d have to see the progression to really know. Interesting they’re going “mainstream”, or closer to it, pricing-wise.

A big knock on their irons has been durability, so curious if these would be an improvement there.

 

Sent from my iPhone using Tapatalk Pro

 

  • Like 1

Driver: :honma: TR20 460, :Fuji: Ventus Black 70X

Fwy: :titelist-small: TS3, 15*, Veylix Rome 888 X

Hybrid: :callaway-small: X2 Hot Pro, 20*, :Fuji: Rombax 8D07HB TM27 X

Irons: :srixon-small: Z585 4/5 iron, Z785 6-PW, :Nippon:Modus 120X

Wedges: Vega VW-06 50*/54*/58*, Dynamic Gold S400

Putter: :seemore-small: Platinum M5 HT Mallet, 36"

Share this post


Link to post
Share on other sites
6 minutes ago, PMookie said:

Not bad, but not sure I’d like to see different sized heads along a set. I’d have to see the progression to really know. Interesting they’re going “mainstream”, or closer to it, pricing-wise.

A big knock on their irons has been durability, so curious if these would be an improvement there.

 

Sent from my iPhone using Tapatalk Pro

 

Hmmm never heard about the durability issue and I've played 500 rounds with my gen1s and just over 300 with gen2s and they're pretty good condition still.

I even made a post about it 🙂

 

 

  • Like 2

Share this post


Link to post
Share on other sites
  • Like 2

:titelist-small: TS1 10.5 Fubuki 45g Shaft

:taylormade-small: SIM Max 5w 18* Ventus Black 

:ping-small:  G410 FW 7,9 Alta CB R flex 

:ping-small: G410 Hybrid 26 degree Alta CB R Flex

:titelist-small: T300 KBS TGI 80 5 iron thorugh 46 W2

:vokey-small: SM7 50.08, 54.08 and 58.14 

:scotty-small:  Phantom 5.5   35" 

:titelist-small: ProV1X Play number 12

 

 

Share this post


Link to post
Share on other sites
1 hour ago, jlukes said:

Seems very un PXG 

When they came out with the Gen II driver that it was to try and get into more of a mainstream price point to compete at the top end of the market.  It appears this is the same thing with irons.  

  • Like 1

:titelist-small: TS1 10.5 Fubuki 45g Shaft

:taylormade-small: SIM Max 5w 18* Ventus Black 

:ping-small:  G410 FW 7,9 Alta CB R flex 

:ping-small: G410 Hybrid 26 degree Alta CB R Flex

:titelist-small: T300 KBS TGI 80 5 iron thorugh 46 W2

:vokey-small: SM7 50.08, 54.08 and 58.14 

:scotty-small:  Phantom 5.5   35" 

:titelist-small: ProV1X Play number 12

 

 

Share this post


Link to post
Share on other sites

I imagine if they lower the price a bit more on the 0311 irons they will sell a lot more.

I get the whole “luxury” thing, but it seems they could profit more if they branches off from the most expensive irons on the market thing.

What do I know. There’s only a ton of demand from what I read, and the supply is only for The Who’s who. Marketing and sales 101.

You can still be a sports car at sports car pricing and not be out of reach for the majority of people.

Share this post


Link to post
Share on other sites
12 minutes ago, Golfspy_CG2 said:

When they came out with the Gen II driver that it was to try and get into more of a mainstream price point to compete at the top end of the market.  It appears this is the same thing with irons.  

Yes, but the Gen 2 driver still looked like a pxg driver. This does not look like a pxg iron. It looks safe and generic , which is the exact opposite feeling Parsons is about 

  • Like 1

In my :mizuno-small: BR-D4 Stand Bag

:ping-small: G410 Plus Ping 9* VA Nemesys 65FIVE
:ping-small: G410 LST 14.5* VA Vylyn 75FIVE
:titelist-small: 818 H2 20* Tour AD DI 85X
:mizuno-small: MP20 HMB 4 Tour AD 95X
:mizuno-small: JPX 919 Tour 5-PW Oban CT 115 X(-)
:titelist-small: Vokey SM7 49 F - 54 S - 59 D
:mizuno-small: M Craft II
:bridgestone-small: Tour B X
 
SuperSpeed Forum Tester
Initial Driver Speed on Provided Monitor: 109 MPH
 

Share this post


Link to post
Share on other sites

First I think they are a nice looking iron with a concept that I love. I gamed a Nicklaus iron that followed it for about five years a decade plus ago and played very well with those clubs. Looking at different sized iron heads bitter me far less than looking at big heads with a lot of great freer and no transition into my wedges like I do now. :(

I think it’s a good move by PXG - I like Ts Mercedes analogy - I think it fits.


Sent from my iPhone using MyGolfSpy

  • Like 3

Ping G410 - set at 12 degrees, fade setting - Alpha Distanza 40 weak R flex shaft

Tour Exotics EX 10 3 wood

Ping G410 5-9 wood

G30 6-PW -  Aerotech FT 500 shafts

SCOR 48,52,58

EVNRoll ER 5

Titleist Pro VIx optic yellow with revkev stamped on them

Share this post


Link to post
Share on other sites

Demand dictates the market. It’s a nice looking set of irons that might do fairly well.


Sent from my iPhone using MyGolfSpy


  • PING G400 LST 8.5 Evenflow Black 65g 6.5
  • PING G 3W HZRDUS Yellow 75g 6.0
  • Mizuno HMB MP20 3i Nippon Modus 3 120S
  • Maltby TS1 4-G Nippon Modus3 120S
  • Maltby TSW 52 Nippon Modus Wedge
  • Maltby TSW 58 Nippon Modus Wedge
  • Bettinardi BB8 Wide 2020
  • Oncore Elixr

Currently testing the Ben Hogan PTx Combo irons https://forum.mygolfspy.com/topic/38486-2020-official-member-review-ben-hogan-icon-ptx-proicon-combo-irons/

 

 

Rochester, NY

4.3 Index

Share this post


Link to post
Share on other sites
18 minutes ago, bens197 said:

Demand dictates the market. It’s a nice looking set of irons that might do fairly well.


Sent from my iPhone using MyGolfSpy

True

3 hours ago, jlukes said:

Seems very un PXG 

The sgi irons weren’t either 

3 hours ago, PMookie said:

Not bad, but not sure I’d like to see different sized heads along a set. I’d have to see the progression to really know. Interesting they’re going “mainstream”, or closer to it, pricing-wise.

A big knock on their irons has been durability, so curious if these would be an improvement there.

 

Sent from my iPhone using Tapatalk Pro

 

What durability issues? I haven’t seen any of this nor read about it. I have a set of gen2 and a fitter who has sold a bunch of gen 1

1 hour ago, Shankster said:

I imagine if they lower the price a bit more on the 0311 irons they will sell a lot more.

I get the whole “luxury” thing, but it seems they could profit more if they branches off from the most expensive irons on the market thing.

What do I know. There’s only a ton of demand from what I read, and the supply is only for The Who’s who. Marketing and sales 101.

You can still be a sports car at sports car pricing and not be out of reach for the majority of people.

They have made their initiation costs back. They are still a luxury brand and want a consumer who is interested in playing the best and at any cost. Ferrari would sell a lot more cars if they lowered the cost too. 

  • Like 3

Driver: Titleist 917D3 9.5 with Graphite Design MAD Pro 65g S

Wood: Titleist 917F2 with UST Mamiya Helium 5F4

Hybrid: Titleist 816H1 21 with Atmos Blue 85 S

Irons: Titleist 718 AP3 4i, 718 CB 5-6, MB 7-9 with KBS $ Taper 125

Wedges: Vokey SM7 46/50/54/60 with DG s200

Putter: Scotty Caemeron Super Rat1

Ball: Titleist Prov1

Share this post


Link to post
Share on other sites

Yes, they would. But they aren’t Ferrari’s. They claim they are, but it’s more like AMC.

 

Never hit one. Shouldn’t have that opinion but I do.

 

Just hard to see this company around in 15-20 years.

  • Like 3

Share this post


Link to post
Share on other sites
1 hour ago, Shankster said:

Yes, they would. But they aren’t Ferrari’s. They claim they are, but it’s more like AMC.

 

Never hit one. Shouldn’t have that opinion but I do. emoji6.png

 

Just hard to see this company around in 15-20 years.

Yeah I wouldn’t knock until you try. Several people I know held a similar opinion then changed their mind once they did 

  • Like 1

Driver: Titleist 917D3 9.5 with Graphite Design MAD Pro 65g S

Wood: Titleist 917F2 with UST Mamiya Helium 5F4

Hybrid: Titleist 816H1 21 with Atmos Blue 85 S

Irons: Titleist 718 AP3 4i, 718 CB 5-6, MB 7-9 with KBS $ Taper 125

Wedges: Vokey SM7 46/50/54/60 with DG s200

Putter: Scotty Caemeron Super Rat1

Ball: Titleist Prov1

Share this post


Link to post
Share on other sites

Seems we've both created an 0211 thread.

As I mentioned in mine, I think it's a good move from PXG overall. I'd have preferred to see them offer these in the same head sizes as they do for the 0311 line instead of as a single progressive set, being as I would prefer to play their T iron, personally.

Sent from my Pixel 2 using MyGolfSpy mobile app

Share this post


Link to post
Share on other sites

I have the PXG Gen 2 driver and I love it.  I did hit the 0311 irons while I was doing my fitting, just for fun.  They felt great, but not $400/club great or whatever the price.  

I'd love to give these a hit, but the one thing I'd be curious about is how they feel.  At $200/club and not being forged, I'd wonder if they would compete against a Mizuno JPX forged as an example.  Granted the AP3's feel amazing, but it would definitely be something I'd want to test.

  • Like 1

Driver: PXG 0811 X Gen 2
3 Wood: Taylormade SIM
3 Utility Iron: Srixon U85
4i – AW: Taylormade P760
SW: Vokey SM7 M Grind
LW: Cleveland RTX 4 X-Low
Putter: Ping Vault Oslo

 

 

Share this post


Link to post
Share on other sites

Am I the only one that notices that these look almost identical to the G700?

  • Like 1

Share this post


Link to post
Share on other sites
2 minutes ago, Shankster said:

Am I the only one that notices that these look almost identical to the G700?

I completely agree.

 

Im sure these are perfectly good irons, but let's be honest, would you want to play the cheap PXG's? Or the expensive Titleist/Taylormade etc? Also, the progressive head design bugs me. If I want a combo set, I'll make one. 

  • Like 1

Wilson Staff C300 9.0* Fujikura Pro 58 stiff

Callaway Rogue 3W Mitsubishi Diamana D+ LTD 80 stiff

Mizuno MP-18 MMC FLI-HI 2 iron UST Mamiya Recoil 95 stiff

Ping I200's 4-W Aerotech Steelfiber I110 CW stiff

Ping Glide 52* and 58* stiff

Bettinardi Studio Stock #38 Armlock

 

 

Share this post


Link to post
Share on other sites
I completely agree.
 
Im sure these are perfectly good irons, but let's be honest, would you want to play the cheap PXG's? Or the expensive Titleist/Taylormade etc? Also, the progressive head design bugs me. If I want a combo set, I'll make one. 


Yeah. I am a pay for what I get type of person. For me to justify the price they’d have to meet all of my criteria. So right out of the gate they don’t meet it being over priced...

Some of them can be had for decent prices. I am really considering the 1 iron as I stated in another post. But that’s only because I can get a deal on one. If not I’d be looking elsewhere.
  • Like 2

Share this post


Link to post
Share on other sites
They have made their initiation costs back. They are still a luxury brand and want a consumer who is interested in playing the best and at any cost. Ferrari would sell a lot more cars if they lowered the cost too. 

Three friends here in-town all have Gen1 and said they won’t go back to PXG just because of the wear and dings.


Sent from my iPhone using Tapatalk Pro

Driver: :honma: TR20 460, :Fuji: Ventus Black 70X

Fwy: :titelist-small: TS3, 15*, Veylix Rome 888 X

Hybrid: :callaway-small: X2 Hot Pro, 20*, :Fuji: Rombax 8D07HB TM27 X

Irons: :srixon-small: Z585 4/5 iron, Z785 6-PW, :Nippon:Modus 120X

Wedges: Vega VW-06 50*/54*/58*, Dynamic Gold S400

Putter: :seemore-small: Platinum M5 HT Mallet, 36"

Share this post


Link to post
Share on other sites
Hmmm never heard about the durability issue and I've played 500 rounds with my gen1s and just over 300 with gen2s and they're pretty good condition still.
I even made a post about it
 
 

I don’t own them, just relaying what three friends here in-town have said. All 3 said they’ll look at other brands when they make a change because of the dings, and bag chatter.


Sent from my iPhone using Tapatalk Pro

Driver: :honma: TR20 460, :Fuji: Ventus Black 70X

Fwy: :titelist-small: TS3, 15*, Veylix Rome 888 X

Hybrid: :callaway-small: X2 Hot Pro, 20*, :Fuji: Rombax 8D07HB TM27 X

Irons: :srixon-small: Z585 4/5 iron, Z785 6-PW, :Nippon:Modus 120X

Wedges: Vega VW-06 50*/54*/58*, Dynamic Gold S400

Putter: :seemore-small: Platinum M5 HT Mallet, 36"

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.


×
×
  • Create New...