MACHINE Limited Edition DAMASCUS Customs

[RookieBlue7 1,677]

Chris, how much are these going to be, or am I out of line asking in this manner? Also, never did get back with you about trying to find a Machine a while back, when you were still in Statesboro. I know you guys don't do a true center shaft, or anything remotely similar, but the longneck M2A's with the fatback, are they face balanced?

[Choeppner 12]

Hello,

 

Let me PM you the pricing on these

 

We do offer Weld Neck Centershafts on both the M1A and M2A Models. I'll post some pics in a second in the Picture thread on here for you

 

The Long Neck's with the Fat Back Flange would be close to Face Balanced, but not perfectly face balanced

 

Thanks in advance

 

-Chris

[Choeppner 12]

Hey Guys,

 

I hope everyone is having a great day I wanted to share pics of this work in progress as you can really see the grain nicely This is a Damascus M2A Converter Head with a Damascus Beefy Back Flange

 

Enjoy

 

-Chris

 

[GolfSpy Dave 1,562]

That is beautiful.

[Choeppner 12]

Thanks More pictures coming as they continue to get worked on

[Choeppner 12]

Hey Guys,

 

I hope everyone is having a great week I wanted to share you with some more Work In Progress Photo's

 

These are the Damascus Limited Edition Converters No.'s 1 and 2 of 8. The 303 Stainless hosels are assembled today for use as an example only. The Damascus hosels start milling tomorrow!

 

As you can see, the grain flows really nicely between the head and flange These currently are finished in our Acid Etch Finish

 

More photo's to come as more milling operations get completed

 

Enjoy

 

-Chris

 

 

 

 

 

[Choeppner 12]

Hey Guys,

 

I hope everyone is having a great day We have finished milling the heads for the M2A Converters and are fixing to mill the heads for the M1A Adjusters and M1A Fixers I wanted to share with you a photo showing the raw bar stock

 

More pictures in just a minute

 

Enjoy

 

-Chris

 

[Choeppner 12]

Hey Guys

 

I wanted to share these 2 Pics with you of a MACHINE ART Damascus Custom Converter Lots of work to go in this head Right now the Bumpers have been melted The Medallion you see will be replaced with a Damascus Cavity Medallion as soon as we mill them This head is fixing to head to our Hot Salts Gun Metal Blue Tank for a nice finish The Gun Blue finish should really make the layers pop

 

More pics to come as she progresses

 

Enjoy

 

-Chris

 

 

[Choeppner 12]

Hey Everyone

 

Last 2 pictures for right now

 

Chris,

 

Pictured here is the 1st Damascus Hand Bent Hosel (medium length)

 

The First Photo shows the Hosel after being lathed

 

The Second Photo shows the Hosel after some hand finishing, then bending, etching, and more finishing, and prior to bluing, more finishing, etc.

 

The bend on this Damascus HBH is 1/2 offset, std lie, 4:30 toe hang.

 

The head was in the middle of the bumpers being melted when these photos were taken

 

Enjoy

 

-Chris

 

 

[Choeppner 12]

Hey Guys

 

I hope everyone had a decent Monday Got a couple of new pics and wanted to share them with you

 

Here we have 2 photos of Limited Edition Damascus MACHINE Putter M2A Converter #3 of 8 after getting a Hot Salts Gunmetal Blue bath

 

The MACHINE is paired with the Damascus Medium Length Hand Bent Hosel #1 for these photos.

 

These parts are right out of the hot oil quench, and there is more custom and finish work to go. This one is going to be GORGEOUS when finished

 

Enjoy the pics

 

-Chris

 

 

[Choeppner 12]

Hey Guys,

 

I hope everyones week is going good so far Wanted to share some more behind the scenes milling operations on the Damascus M2A Converter #1 of 8 Here you can see the neck getting milled and the sightline being milled into the head

 

Enjoy

 

-Chris

 

 

 

 

 

[Choeppner 12]

Hey Guys,

 

I hope everyone is having a great week I wanted to share some more Damascus Work In Progress Photo's with you

 

The first photo is the MACHINE Damascus Head and Damascus Beefy Back Flange after the Perpendicular Sight Line on the Toplineline, The Giff Cut and Nibble Cuts Milled into the Flange. This head is paired with the Damascus Disco Ball Hosel (prior to etching, bending and finishing).

 

The second and third photos show the finishing work on this MACHINE in Progress

 

The fourth photo shows the Damascus Disco Ball Hosel after its first acid etch (while still wet).

 

Enjoy

 

-Chris

 

 

 

 

[Choeppner 12]

Hello Everyone,

 

I hope you are all having a great day I wanted to share with you a couple of the Billets of Damascus after they have been milled into the block for the head These will be milled into the Damascus M1A Adjusters and Damascus M1A Adjusters

 

Enjoy

 

-Chris

 

 

[Choeppner 12]

Hey Guys,

 

I hope everyone is having a great day I wanted to show some work in progress pics of a Left Hand MACHINE Damascus M1A Adjuster These pics are right after the head was milled. The next step is the Deburring and clean up. Once we get the head cleaned up, we can then give this head the Acid Etch which will bring out the different layers in the Damascus

 

Enjoy

 

-Chris

 

 

 

[JohnBarry 119]

Wow, that's all I can say now..just speechless on how good these look.

[Choeppner 12]

Thanks for the compliment Will update with more pics as these progress thru the stages.

 

Thanks

 

-Chris