Jump to content
Golfspy_CG2

2019-Official Forum Member Review-PING Blueprint Irons

Recommended Posts

How much of a flight gap (estimated) can you do with the same iron? For example how low/high can you flight a 3 iron?  If there was a grill on the course, I'd ask you to bounce a 6 iron off it with a ball into a trash can
 
MDGolfHacker


Oh man.

Anywhere from just over head high to a big moon ball.

25 yards in height difference maybe? More or less perhaps.

PW for example I can send a big high cut that goes 110 yards, or send a bullet that is maybe 45’ high that goes 140.

The actual height is just an estimate.

No grills in the course, and not much room in the yard for tricky stuff... but I’ll see what I can do.
  • Like 3

Share this post


Link to post
Share on other sites

You've been gaming these for a while now and your swing is really getting in the groove. Is your confidence through the roof with them yet? Are they now permanently in the bag or are there still doubts about them?

  • Like 1

Share this post


Link to post
Share on other sites
You've been gaming these for a while now and your swing is really getting in the groove. Is your confidence through the roof with them yet? Are they now permanently in the bag or are there still doubts about them?


They’ve been in the bag mostly from day 1.

I only had a small learning curve with them, I just dropped the TM’s out and put these in. Didn’t give myself a chance to not sharpen my game. I did hit the TM’s at the range, and put them head to head, but in the end the performance was so similar it was a no brainer to keep them in full time.

They do bite when you act up. Definitely forgiving on minor mishits, but I’ve said numerous times “get up there”, a little thin or horizontally missed there is definitely a drop off in ball speed, but nothing worse than the old clubs.

My confidence isn’t through the roof, but knocking on the ceiling tiles... but I think that is more the new swing, and maybe a combo with the irons..? I haven’t had a chance to play as much as I would have liked this summer, new job was a bit more demanding than I was expecting.

I will most likely add something in the 2-3 iron spots that had a touch more forgiveness. The course I’ll be playing doesn’t really call for many long iron shots, aside from the tee. I’ll save the butter knives for a dried out summer day, or when I make it to Scotland/Ireland.
  • Like 2

Share this post


Link to post
Share on other sites

Evening Everyone - I have a few moments for a small update. As I’ve said in other threads I am swamped with more than I can handle right now....

... But I vow to get a round in this week and get an update for you all. I think it will be good coming off a few “bye weeks”, to see if I have lost any confidence with the irons.

We have another work outing planned for Mid October, and I plan on winning that one just like the last, so I’ll have to get some practice in.

I just cleaned them (no that they needed it) but I’ve got the itch to throw some divots.

Main focus this week will be the bounce back ability of myself with a blade.

  • Like 2

Share this post


Link to post
Share on other sites
Work meeting tomorrow. I’ll have to stay overnight, and it just so happens there is a course at the hotel...

The test is going to be straight up against my previous set, prepping for the tournament on Friday. Ok it’s just a scramble, but I still want to win.

I don’t see the Blueprint’s getting taken out of the bag, but I am doing a one for one shot on the course. Mano a mano.

IMG_6350.thumb.JPG.07fd5e5379ee2fa2e897ce84777b0262.JPG

What were the results here? I didn’t see it in the thread.


Sent from my iPhone using Tapatalk Pro
  • Like 1

Share this post


Link to post
Share on other sites

What were the results here? I didn’t see it in the thread.


Sent from my iPhone using Tapatalk Pro


Oh yeah. Blueprint’s stayed in the bag.

I definitely noticed a sound/feel difference. The Blueprint irons felt like a solid chunk of metal smashing into a ball... go figure right?

The TM’s to me have a great feel, unique to anything I’ve hit prior to or after owning them. Mostly in the irons with the speed slot, it’s a soft feeling. That’s the 3-7 iron, 8-P doesn’t have the slot and they feel more like a solid piece of metal, even though they are a CB. I really like the feel of these, so much that even some forged clubs feel clicky and hard to me.

Blueprints are on the firm side, but you get the reverberations you’d expect from smacking a piece of urethane covered rubber with a smashed together piece of metal. Paired with a PV1, it’s a hard combo to beat... feel wise.

I will say that distances in the shorter irons are fairly equal, but when I moved up to the 4,3,2 iron I’m not sure there is a huge distance gap between them all.

No way to know unless I walk out on the range, or hit numerous balls out in the fairway. I’ll remember to take note of this next round.

I don’t see the Blueprint’s coming out of the bag, at least the 5 iron - Wedge.
  • Like 6
  • Love 1

Share this post


Link to post
Share on other sites
On 9/23/2019 at 5:50 AM, Shankster said:

I don’t see the Blueprint’s coming out of the bag, at least the 5 iron - Wedge.

Maybe time for a name change "Pingster" 😉.  

  • Like 2

Share this post


Link to post
Share on other sites
Maybe time for a name change "Pingster" .  


Nah. I like my carriage maker surname from days gone by.

Thought about Shanksenstein for Halloween though.

Thanksgiving is definitely HappyShanksGiving.

Then for Christmas time it could be Shanksthehalls.

Valentine’s Day... Shanksentine.

4th of July... IndeShanksendce Day.

I’m sure I could come up with some more, but Son’s birthday is tomorrow; the BIG 1 1. So I’ll be tied up with cake, and whatever else the big man wants to do.

Planning on Sunday to take the Blueprints out for a stroll.

  • Like 3
  • Haha 3

Share this post


Link to post
Share on other sites

️ Update:

Went to play 9 today and there were 5 groups backed up on the first tee...

So I hit 4 buckets of range balls instead. It has been a long time by standards since I swung a club.

First thought was, dannnngggg these things feel good, even with range rocks.

Second was, dannnnnnnggggg I can still hit them.

Still working the one(ish) plane swing. I think taking a little extended break was good, as my mishits were small, and not often. But I did notice that my takeaway gets a bit quick, and that’s when the Captain Hooks show up.

Had about a 10mph crosswind that would exaggerate a fade, I was able to hold draws up in the wind, even over draw some through the wind.

Flip side of that I could also keep them straight, and control the fade.

After a good warm up I “played” the course through the bag.

Driver, 2 iron, Wedge. And so on.

The short game area was occupied by a father son duo, so I skipped that today.

One more check in the box for me, it’s like riding a bike.

These Blueprints are really trying to get some more PING brethren in the bag, I can hear them talking to me... whispering sweet G410 Plus, and Glide Forged Wedges nothings in my ear... and I think I heard G410 2 Hybrid too... and probably something that sounded like Hoof R 14...?

Point being, these are top quality, along with the rest of the PING gear.

I’ll get a round in soon. Tournament in 2 weeks.

And.... I think we are due for an updated photo shoot.

  • Like 8
  • Haha 1

Share this post


Link to post
Share on other sites

First tourney win for the Blueprints !

Cameron Champ WITB:

DRIVER: Ping G410 LST (9 degrees), with Project X HZRDUS Smoke Green 6.5 TX shaft

FAIRWAY WOOD: Ping G410 LST (17.5 degrees), with Project X HZRDUS Black 85X shaft

IRONS: Ping i500 (4), i210 (4), Blueprint (5-PW), with True Temper Dynamic Gold Tour Issue X100 shafts

WEDGES: Ping Glide Forged (52, 56 degrees), TaylorMade Milled Grind Hi-Toe (60 degrees), with True Temper Dynamic Gold Tour Issue S400 shafts

PUTTER: Ping PLD Tyne CS

BALL: Srixon Z-Star XV

GRIPS: Lamkin UTX

  • Like 9

Share this post


Link to post
Share on other sites
First tourney win for the Blueprints !
Cameron Champ WITB:

DRIVER: Ping G410 LST (9 degrees), with Project X HZRDUS Smoke Green 6.5 TX shaft

FAIRWAY WOOD: Ping G410 LST (17.5 degrees), with Project X HZRDUS Black 85X shaft

IRONS: Ping i500 (4), i210 (4), Blueprint (5-PW), with True Temper Dynamic Gold Tour Issue X100 shafts

WEDGES: Ping Glide Forged (52, 56 degrees), TaylorMade Milled Grind Hi-Toe (60 degrees), with True Temper Dynamic Gold Tour Issue S400 shafts

PUTTER: Ping PLD Tyne CS

BALL: Srixon Z-Star XV

GRIPS: Lamkin UTX



It was a heck of a weekend for PING. Won on the PGA, won the Dunhill, and won on the Champions Tour.

I’ve noticed an uptick in the Blueprint usage. I can’t deny, these things do give me that warm and fuzzy feeling.

Working on a good photo op for these. But another busy week this week might slow me down a little.

I will say my favorite club is the 2 iron. Love hitting that thing.
  • Like 6

Share this post


Link to post
Share on other sites


It was a heck of a weekend for PING. Won on the PGA, won the Dunhill, and won on the Champions Tour.

I’ve noticed an uptick in the Blueprint usage. I can’t deny, these things do give me that warm and fuzzy feeling.

Working on a good photo op for these. But another busy week this week might slow me down a little.

I will say my favorite club is the 2 iron. Love hitting that thing.


The fact that your favorite iron is the 2 iron is all the proof I need to determine you have severe mental health issues. Please seek help soon.


Sent from my iPhone using Tapatalk
  • Like 2
  • Haha 1

Share this post


Link to post
Share on other sites


The fact that your favorite iron is the 2 iron is all the proof I need to determine you have severe mental health issues. Please seek help soon.


Sent from my iPhone using Tapatalk


Probably so. But... honestly it’s the club I hit the best. Not sure what the deal is, but it just goes.

High, low, medium... pure 17.5° goodness.

I should do a one club challenge with it....?
  • Like 2

Share this post


Link to post
Share on other sites
2 hours ago, Shankster said:

I will say my favorite club is the 2 iron. Love hitting that thing.

This belongs in the MGS HOF. 

  • Like 3

Share this post


Link to post
Share on other sites


Probably so. But... honestly it’s the club I hit the best. Not sure what the deal is, but it just goes.

High, low, medium... pure 17.5° goodness.

I should do a one club challenge with it....?


That’s awesome. I love that feeling when something clicks with your equipment. Definitely something you won’t want to give up anytime soon.

Although I can’t say mine has happened with even a mid-iron... and I’ve never owned a 2 iron! I guess that’s the ultimate proof the guys at MGS chose the correct person for this test!


Sent from my iPhone using Tapatalk
  • Like 1

Share this post


Link to post
Share on other sites


That’s awesome. I love that feeling when something clicks with your equipment. Definitely something you won’t want to give up anytime soon.

Although I can’t say mine has happened with even a mid-iron... and I’ve never owned a 2 iron! I guess that’s the ultimate proof the guys at MGS chose the correct person for this test!


Sent from my iPhone using Tapatalk


I used to have an old PING 1 iron I used as my driver for a good bit of time.

I’d give a Blueprint 1 iron a go, I imagine it would be around 15°-15.5° of wholesome 8620 Forged Grain Steel. Breakfast of champions.

I think it was an ISI 1 iron, which was 15.5°... loved that thing.

As far as the correct person...? Not sure about that, but I still am shocked even 3 months later. Another testament as to why this place is the bees knees!
  • Like 4

Share this post


Link to post
Share on other sites

I still play my MP 14 1 iron occasionally - it's the same loft as the Blueprint 2 iron I think but I have always hit that club well. My issue now is speed - I don't have enough speed to get out of a 1 iron what I should even if I do hit it solid. That said I'm really enjoying the 2 Crossover - great club. I think I'm going to order some more Blueprints. I'm doing the 8 iron for sure but I'm considering 6 and 7 as well.


Sent from my iPhone using Tapatalk

  • Like 2

Share this post


Link to post
Share on other sites
I still play my MP 14 1 iron occasionally - it's the same loft as the Blueprint 2 iron I think but I have always hit that club well. My issue now is speed - I don't have enough speed to get out of a 1 iron what I should even if I do hit it solid. That said I'm really enjoying the 2 Crossover - great club. I think I'm going to order some more Blueprints. I'm doing the 8 iron for sure but I'm considering 6 and 7 as well.


Sent from my iPhone using Tapatalk


I had an offline conversation with Stud about that same thing not long ago. I don’t see any performance loss in those mid irons over my CB’s.

The look of the Blueprint is more “professional” at address, by that I mean it looks like they took a lot of time to build them.... and they did. Very tidy look. Simplistic, Historic and futuristic all in one package.

As time goes by the shape, and finish are really growing on me. For the Blueprint players I hope this isn’t a one off club and they continue to refine it in the future.
  • Like 3

Share this post


Link to post
Share on other sites


I had an offline conversation with Stud about that same thing not long ago. I don’t see any performance loss in those mid irons over my CB’s.

The look of the Blueprint is more “professional” at address, by that I mean it looks like they took a lot of time to build them.... and they did. Very tidy look. Simplistic, Historic and futuristic all in one package.

As time goes by the shape, and finish are really growing on me. For the Blueprint players I hope this isn’t a one off club and they continue to refine it in the future.


It's funny - when I first saw the Blueprints I thought it was the perfect club for me because they were 1) a blade and 2) they were made by ping. I have always loved Ping (the first equipment company I fell in love with) but since having my first set of blades, have always thought blades were superior. I would vacillate between blades and Ping so the Blueprint was a match made in heaven. The problem for me was that I was really enjoying the i500's and thought I would be giving up to much. After playing the 9 and PW, I can tell you that the Blueprint irons are amazing. The size is a bit intimidating at first but now I love it - it somehow makes it more likely to hit it solid and it feels more solid behind the ball - something akin to Baby Blades. I honestly feel like a blended set of the Blueprint and i500 are the perfect set of irons. We will see what the ultimate blend is through a bit more testing.


Sent from my iPhone using Tapatalk
  • Like 4

Share this post


Link to post
Share on other sites


It's funny - when I first saw the Blueprints I thought it was the perfect club for me because they were 1) a blade and 2) they were made by ping. I have always loved Ping (the first equipment company I fell in love with) but since having my first set of blades, have always thought blades were superior. I would vacillate between blades and Ping so the Blueprint was a match made in heaven. The problem for me was that I was really enjoying the i500's and thought I would be giving up to much. After playing the 9 and PW, I can tell you that the Blueprint irons are amazing. The size is a bit intimidating at first but now I love it - it somehow makes it more likely to hit it solid and it feels more solid behind the ball - something akin to Baby Blades. I honestly feel like a blended set of the Blueprint and i500 are the perfect set of irons. We will see what the ultimate blend is through a bit more testing.


Sent from my iPhone using Tapatalk



I really like Champ’s set up. 5-PW Blueprint, 4 iron iBlade, 3 iron i500 I believe. Seems like a perfect transition. Would even be good with 4-5 iBlade.

But you are right. They look pretty darned good at address... and the feel is like nothing I’ve hit before. The whole face feels the same (inside the grooves) and not super thin or high on the blade.

Can’t wait to hear about your set up.

I am thinking about going to get fit for a G410 Driver real soon.
  • Like 3

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.


  • Daily Deals

  • Sponsors

  • Our Sponsors

     
     
     

  • Member Statistics

    • Total Members
      82,711
    • Most Online
      2,247

    Newest Member
    Kong
    Joined
  • Similar Content

    • By mr.hicksta
      Vessel Player 2.0 14-Way Stand Bag
       G410 LST 9º (45") | ACCRA TZ5 65 M4 (70g, tipped 1/2", D2) 
       G410 3W 14.5º (43") | ACCRA TZ5 75 M4 (78g, tipped 1 1/2", D2)
      G410 2H 18º (40.75") | ACCRA TZ5 95H M4 (95g, tipped 1 1/2", D2)
      Epon AF-505 4-PW | Nippon Pro Modus3 Tour130 S (124g, Hard Stepped, 4-9 D3, PW D4)
      Epon Tour 50º F, 54º N, 58º O | Nippon Pro Modus3 Tour130 X (129g, Soft Stepped, D4, D5, D6)
      PXG Bat Attack Gen2 (33") | KBS CT Tour Putter
       Pro V1x

      Accessories: Bushnell Pro XE, Golf Pride Tour Velvet/Tour Velvet 360 grips, Ping Tour and Sport Gloves,  Robert Mark Golf and Dormie Workshop headcovers/putter cover, Club Glove pocket towel, Cayce Golf caddy towel and custom Epoch S3 tees.








       
    • By THEZIPR23
      Almost a total remodel of the bag.
       



       Epic Flash SZ 10.5 set at -1 N Graphite Design Tour AD TSG Blue X (45")
      M3 15 set at -2 Paderson Fairway KG 860-F30 S
      Epic Flash SZ 18 set at S N Tensei AV Blue 70 X
       Z585 4 & 5 KBS C Taper S
       Z785 6-AW KBS C Taper S
       Glide Forged 56 KBS Hi Rev 2.0
       Glide Forged 60 KBS Hi Rev 2.0
       SS 28 CS 33"
       
      Driver: Thank you MGS, flat out the best driver I have ever had in the bag.
      3W: A random purchase after being unable to hit the original epic 3w. Put same shaft that I was fit for in the epic and it has been a match made in heaven. Absolute money from the tee and I know exactly what it will do from the fairway. Combined with the driver there are not many par 5's that I can't reach. 
      5W: Solid club but this spot has always been a trouble spot in my bag and that hasn't changed in 20 years. 
      Irons: Love the combo and they feel absolutely amazing. All of them are 1* strong, standard lie and +1/2" Biggest thing I was looking for in making the change was more control. They definitely fly different than P790's but hopefully after an adjustment period they will meet or exceed my expectations. 
      Wedges: A different look from what I am used to but feel is amazing. The shaft on full swings is so easy for me to deliver correctly. 
      Putter: Not a fast revolving door but one that moves some. Have gotten used to the look of the center shaft but still struggling with alignment some. 
      Ball: Titleist PROV1X #23 imprinted with THEZIPR in blue. Have played this ball since its birth and while I have tried many other options nothing has been able to kick it out. 
      Rangefinder: Bushnell PRO X2 
      Glove: Footjoy Weathersof. Love the Ping tour glove but at the rate I go through gloves I just can't justify the price difference.
      Shoes: Ecco Biom G 3 BOA and Biom Hybrid 3 BOA. Most comfortable shoes I have ever worn. 



    • By Golfspy_CG2
      When it comes to PING many things come to mind, quality, engineering, performance and irons are among the first things most people will think of.   And with the release earlier this year of the G410 irons, PING has hit on each one of those characteristics. 
      Following the huge success of the G400 irons, PING has hit a home run with the striking black and red colors of this iron, as well as a being a bit more streamlined in all the right places.   PING has achieved the rare feat of providing an iron that has a profile appealing to even the most discerning of golfers, but yet still offering the forgiveness and help that higher handicaps look for. 

      We are looking for three forum members to join staff member Golfspy_Stroker in testing, reviewing and keeping a set of these G410's built to their custom specs.  Testing will require a nearly two month commitment of putting the irons in play on the course, at the range and providing ongoing commentary in the forum thorough out the process. 
      As an extra bonus to the irons, the selected testers will have the option to choose Golf Pride Tour Velvet grips equipped with Arccos.  The clubs will come with a 99 day free trial to arccos.  After that the tester would be responsible for paying for the subscription in order to continue it.   It will be a great way to add data to your review. 
      PING has opened this testing to all golfers regardless of country of residence.   All you have to do to be eligible for the testing is follow the below instructions.
       
      In a post in this thread please provide the following information...AND DO NOT QUOTE this post when replying!
      First Name/State or Country of residence
      Handicap
      Current irons in Play
      The carry distance of the your 7 iron
      That's it.   Good luck to everybody
      We'll be selecting the testers within the next 10 to 14 days, so check back to see if you've been selected!

      ===========================================================================================
      YOUR ATTENTION PLEASE....

      Please join me in congratulating these members selected from a very large and diverse applicant pool:

      @ballplayer002003
      @GregB135
      @Rickp
      Official announcement here:
      https://forum.mygolfspy.com/topic/33112-testers-wanted-3-ping-g410-irons/?do=findComment&comment=571106
       
    • By Golfspy_CG2
      Lynx Golf Continues Momentum with Launch of LynxGolfUSA.com, Release of Black Cat Lines
        (Weybridge, Surrey, UK) – Lynx® Golf – the iconic equipment brand trusted by multiple major championship winners over its storied history – unveils LynxGolfUSA.com, a new website providing American golfers access to the manufacturer’s innovative lines, including the new Black Cat Series.

      Launch of the site coincides with new social media channels, Facebook, Twitter and Instagram, and will feature unique blog content, newsletter sign-up and more. Bolstering the introduction of the new site and social media channels is the U.S. debut of the latest generation of the famed Black Cat line, which delivers leading-edge technology in an attractive and classic aesthetic.  
       
      “The U.S. site is the latest step in our journey to bring this iconic brand back to a place of prominence in the American golf market,” says Stephanie Zinser, CFO and co-owner of Lynx Golf. “Black Cat is the perfect series to accompany our website and social launches as golfers have fond memories of previous iterations, but that nostalgia will quickly be replaced with modern performance that maximizes both distance and accuracy.”
       
      The Black Cat line features innovations unique to the Lynx brand: Effective Energy Transfer – Each driver, fairway wood and hybrid are engineered with proprietary technology designed to disperse energy across the club face, offering greater forgiveness on off-centre hits.                                                                                                                                                                                                                                                                                                                                         Weight Bar System – Found in the line’s driver and fairway woods, the system transfers weight from the front to the back of the clubhead, giving players control over their preferred launch and spin rate.                                                                                                                                                                             Hollow-Head Technology with Variable Face Thickness – Each iron distributes weight across the hitting surface while a polymer-filled hollow cavity in the head allows for one of the thinnest forged faces in the industry. This provides more effective energy transfer across the face for increased ball speeds and a higher, more stable MOI throughout the set.  Over the past several years, the Lynx brand has made a resounding impact in the U.K., as the company has recorded double-digit annual sales increases every year since 2013. This growth has been driven by several successful products which will be featured on LynxGolfUSA.com including the popular Prowler VT irons, Prowler Forged irons, and Tigress line of women’s clubs.                                    
      “Without our success in Europe and around the world, days like today are not possible” says Steve Elford, CEO and co-owner of Lynx Golf. “What golfers are about to see and experience in the U.S. started nearly a decade ago when our team set out to restore the glory once associated with the iconic brand.”
        
      Founded in the 1970’s by John Riley Sr. and Carl Ross, Lynx® Golf quickly established a massive fanbase among the game’s best players. This included legendary ambassadors who trusted the brand to help them capture victories at the 1992 Masters and 1994 US Open, among other wins.
       
      Lynx’s renowned product lines include everything from TOUR-caliber clubs, such as the Prowler VT irons, to products geared for mid-to-high handicappers. At the professional level, the brand continues to draw talent, as its ambassadors include the legendary Dame Laura Davies and former European Tour standout, and current Sky Sports TV presenter, Nick Dougherty, as well as LET players Lydia Hall, Becky Brewerton and Trish Johnson.  
        About Lynx® Golf
        
      Lynx® Golf concentrates on developing high quality, technologically-advanced but affordable golf clubs, backed up by great customer service. In the UK, it has gained a strong foothold in ‘green grass’ golf accounts – retail operations typically run at golf courses by PGA Professionals - with clubs designed and assembled in the UK at the company’s Weybridge, Surrey, headquarters.
       
      For more information visit: www.Lynxgolfusa.com, www.Lynxgolf.co.uk/, or follow @LynxGolfUK on twitter.
  • Recent Topics

  • Latest from the Blog

  • Happy Birthday Today!

×
×
  • Create New...