Jump to content
Sign in to follow this  
TR1PTIK

Putter Strike Location

Recommended Posts

Our Sponsors

Took this photo after a round a few weeks ago and it got me wondering about whether or not I should try to move my strike a little lower on the putter face. The upper most portion of the face (silver part) is steel and the lower part (black) is aluminum. The current strike pattern is almost exactly center (top-to-bottom) of the total face height and milling marks, but it’s high on the aluminum. Should I be trying to attain a strike that’s centered on the aluminum?

AA284736-327A-4B24-AFD5-AD46FB9CD405.jpeg

Edited by TR1PTIK

Driver: Mizuno ST190 9.5* Fujikura Atmos Blue 5S
Fairway Wood: Mizuno ST190 15* Fujikura Atmos Blue 6S
Hyrbrid: Mizuno CLK 19* Fujikura Speeder EVO HB
Irons: Nike Vapor Pro Combo (4-PW) Dynamic Gold Pro S300
Wedges: Bridgestone Tour B XW-1 50*, 54*, & 58* Nippon Modus 3 105
Putter: Scotty Cameron Futura 6m 33"
Ball: Bridgestone Tour B XS
Bag: 2017 Titleist Players 5 Stand Bag

Share this post


Link to post
Share on other sites

It looks to me like you are striking in the center of the machined pattern, which I would think is the goal, regardless of where it is relative to the insert.

  • Like 1

Driver: :bridgestone-small: Tour B JGR 9.5* Recoil 460ES cut to 45"
3W: :bridgestone-small: Tour B JGR 15* Recoil 460ES
3H, 4H: :bridgestone-small: Tour B JGR 19*, 23* Recoil 780ES
4-PW:  :bridgestone-small: Tour B JGR HF2 Modus3 Tour 105
AW: :mizuno-small:S5 52*
SW: :cleveland-small: 588
LW: :callaway-small: MD3
Putter: :odyssey-small: Stroke Lab Marxman
Bag: :bridgestone-small: Tour B Stand Bag
Ball: :srixon-small: Z-Star
Pushcart: BigMax iQ+

:SuperSpeed: Tester
Starting Driver Speed on PRGR Monitor: 102 mph

Share this post


Link to post
Share on other sites
20 minutes ago, MaxEntropy said:

It looks to me like you are striking in the center of the machined pattern, which I would think is the goal, regardless of where it is relative to the insert.

That was my original thought, but I started to wonder if catching it more towards the top edge of the aluminum would produce any negative effects due to increased harshness (it doesn't actually feel harsh though) or some actual performance reason.

I'd assume I'm good where I'm at, but certainly if I were gaming something with an insert akin to the Odyssey White Hot then striking it that close to the border between materials would be detrimental. No?

 


Driver: Mizuno ST190 9.5* Fujikura Atmos Blue 5S
Fairway Wood: Mizuno ST190 15* Fujikura Atmos Blue 6S
Hyrbrid: Mizuno CLK 19* Fujikura Speeder EVO HB
Irons: Nike Vapor Pro Combo (4-PW) Dynamic Gold Pro S300
Wedges: Bridgestone Tour B XW-1 50*, 54*, & 58* Nippon Modus 3 105
Putter: Scotty Cameron Futura 6m 33"
Ball: Bridgestone Tour B XS
Bag: 2017 Titleist Players 5 Stand Bag

Share this post


Link to post
Share on other sites
1 minute ago, TR1PTIK said:

I'd assume I'm good where I'm at, but certainly if I were gaming something with an insert akin to the Odyssey White Hot then striking it that close to the border between materials would be detrimental. No?

Agreed if the insert is something pretty soft. Do you know how the aluminum is attached? If it's something solid (screws, rigid epoxy), I don't think it would matter, but if it's a soft adhesive, you may have a point. To me it looks like you are hitting it where it is designed to be hit.

  • Like 1

Driver: :bridgestone-small: Tour B JGR 9.5* Recoil 460ES cut to 45"
3W: :bridgestone-small: Tour B JGR 15* Recoil 460ES
3H, 4H: :bridgestone-small: Tour B JGR 19*, 23* Recoil 780ES
4-PW:  :bridgestone-small: Tour B JGR HF2 Modus3 Tour 105
AW: :mizuno-small:S5 52*
SW: :cleveland-small: 588
LW: :callaway-small: MD3
Putter: :odyssey-small: Stroke Lab Marxman
Bag: :bridgestone-small: Tour B Stand Bag
Ball: :srixon-small: Z-Star
Pushcart: BigMax iQ+

:SuperSpeed: Tester
Starting Driver Speed on PRGR Monitor: 102 mph

Share this post


Link to post
Share on other sites

Strike location seems okay. Lots of thinks can influence so how would you fix? Forward shaft lean, ball back in stance, descending blow would tend to be high on face. Opposite would be low on the face. What I have seen is more people seem to hit “high” on the face.

If you are hitting the ball on you like and can control the speed then I wouldn’t change anything. If you decide to try and change make sure that you understand what you are trying to accomplish; which, needs to be more than the strike location looks better.

  • Like 1

Driver:  :ping-small: G400 Max 9* with UST Proforce V2
Fairway: :titelist-small: TS3 15* set  w/Project X Hzardous Smoke
Hybrids:  :titelist-small: 816H1 19* set at 18* w/KBS Tour Graphite Hybrid Prototype
                :titelist-small: 915H  21*  w/KBS Tour Graphite Hybrid Prototype
               :titelist-small: 915H 24*  w/KBS Tour Graphite Hybrid Prototype
Irons:      :srixon-small: 765 6-AW with KBS Tour shafts
Wedge:  :cleveland-small: 588 54-14, 58-12
Putter:  :odyssey-small: Ten S      Backups:  :bobby-grace-1: 6330,   :EVNROLL: ER2.2,  

 

Member:  MGS Hitsquad since 2017697979773_DSCN2368(Custom).JPG.a1a25f5e430d9eebae93c5d652cbd4b9.JPG

 

Share this post


Link to post
Share on other sites
Just now, MaxEntropy said:

Agreed if the insert is something pretty soft. Do you know how the aluminum is attached? If it's something solid (screws, rigid epoxy), I don't think it would matter, but if it's a soft adhesive, you may have a point. To me it looks like you are hitting it where it is designed to be hit.

I just did a tiny bit of research to confirm. It's held together with 4 screws, and also utilizes a "vibration dampening system".

https://www.titleist.com/golf-clubs/putters/futura

Based on the images, it looks like there is enough aluminum behind the hitting zone for it not to matter. I never really gave it any thought before because until I took that picture, I never realized where my strike location was. I just knew if it felt good or didn't, etc. I was really quite surprised to see just how consistent I am with the flat stick!

I always like to ask the community about things like this. When we buy clubs, no one tells us how they were actually designed to be hit in terms of CG location, etc. for maximum effectiveness. Until MGS started their CG study and discussion, I never would have even considered it.

  • Like 1

Driver: Mizuno ST190 9.5* Fujikura Atmos Blue 5S
Fairway Wood: Mizuno ST190 15* Fujikura Atmos Blue 6S
Hyrbrid: Mizuno CLK 19* Fujikura Speeder EVO HB
Irons: Nike Vapor Pro Combo (4-PW) Dynamic Gold Pro S300
Wedges: Bridgestone Tour B XW-1 50*, 54*, & 58* Nippon Modus 3 105
Putter: Scotty Cameron Futura 6m 33"
Ball: Bridgestone Tour B XS
Bag: 2017 Titleist Players 5 Stand Bag

Share this post


Link to post
Share on other sites
1 minute ago, cnosil said:

Strike location seems okay. Lots of thinks can influence so how would you fix? Forward shaft lean, ball back in stance, descending blow would tend to be high on face. Opposite would be low on the face. What I have seen is more people seem to hit “high” on the face.

If you are hitting the ball on you like and can control the speed then I wouldn’t change anything. If you decide to try and change make sure that you understand what you are trying to accomplish; which, needs to be more than the strike location looks better.

Excellent points. I honestly don't know what AoA would be, but I'd assume I'm pretty neutral or possibly swinging slightly up as I don't want the ball to skid. I actually putt with a cupped left wrist and don't press at all anymore. I find when I do that I will hit more down on the ball and it creates all sorts of issues for me.


Driver: Mizuno ST190 9.5* Fujikura Atmos Blue 5S
Fairway Wood: Mizuno ST190 15* Fujikura Atmos Blue 6S
Hyrbrid: Mizuno CLK 19* Fujikura Speeder EVO HB
Irons: Nike Vapor Pro Combo (4-PW) Dynamic Gold Pro S300
Wedges: Bridgestone Tour B XW-1 50*, 54*, & 58* Nippon Modus 3 105
Putter: Scotty Cameron Futura 6m 33"
Ball: Bridgestone Tour B XS
Bag: 2017 Titleist Players 5 Stand Bag

Share this post


Link to post
Share on other sites

My observation would be that with the contact high on the face, you are actually hitting down on the ball. It seems that if you were to move the ball forward in your stance you would strike up on the ball which would get the ball rolling a bit sooner. You are striking the ball in the center from toe to heel. I would wonder if with your current strike location if you come up short on some putts. The skid and drag produced by the downward strike seems like it would cause the ball to come up short. Those are the things that I think of when I see the strike high on the face. 


Lefties are always in their Right Mind

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Sign in to follow this  

×
×
  • Create New...