Jump to content

Tool for Measuring Club Length


Recommended Posts

Our Sponsors

I am looking to buy a setup to measure club length (driver, irons, putters etc.). I build clubs and modify off the rack clubs too. I have a good swingweight scale now, and want to have a more consistent setup for club length. Currently I use a board, with a piece of wood on it mounted at 60 degrees to the centre line which I measure along (sort of inline with the USGA method I guess), it works well enough, but I'm wondering about maybe getting a more "professional" setup. I am looking at,

 

The Mitchell setup,

 

http://www.mitchellgolf.com/products/CLUBLENGTH_Ruler_Measuring_Tool_Kit-288-47.html

 

and the Maltby setup,

 

http://www.golfworks.com/product.asp_Q_pn_E_MA2010_A_cn_E_10026,

 

they are both in the $130 can (ya, I live in canada)

 

Looking for suggestions on other options, styles, experience with either of these brands etc.

 

Thoughts ? comments ? Thanks,

Link to post
Share on other sites

I have this kit: http://www.mitchellgolf.com/products/CLUBLENGTH_Ruler_Measuring_Tool_Kit-288-0.html

 

It's $99.99 through Mitchell and works perfect every time.

In The Bag
Driver: TaylorMade M2 (2017) w/ Project X T1100 HZRDUS Handcrafted 65x 
Strong 3 wood: Taylormade M1 15* w/ ProjectX T1100 HZRDUS handcrafted 75x
3 Hybrid: Adams PRO 18* w/ KBS Tour Hybrid S flex tipped 1/2"
4 Hybrid: Adams PRO 20* (bent to 21*) w/ KBS Tour Hybrid S flex tipped 1/2"
4-AW: TaylorMade P770 w/ Dynamic Gold Tour Issue Black Onyx S400

SW: 56* Scratch Tour Dept(CC grooves) w/ Dynamic Gold Spinner
LW: 60* Scratch Tour Department (CC grooves) w/ Dynamic Gold Spinner
XW: 64* Cally XForged Vintage w/ DG X100 8 iron tiger stepped
Putter: Nike Method Prototype 006 at 34"

Have a ton of back-ups in all categories, but there are always 14 clubs in the bag that differ depending on the course and set-up. Bomb and gouge. Yes, I'm a club gigolo.

Link to post
Share on other sites
  • 6 months later...

I use the cheap 48" ruler from GolfWorks and its never let me down. I just finished building a set and took them to my friends shop to measure on one of his tools like you posted above, every club was spot on.

 

http://www.golfworks.com/product.asp_Q_pn_E_RUL48

I basically use the same thing you do but mine came from the Home Depot around the corner from me. Ie;; No shipping charges in fact I rode my motorcycle there maybe used 25 cents worth of gas

Driver --- Honma G1-X Stock R Flex----  3W Callaway Steelhead UST Pro Force Gold 65 stiff--- 2 iron 1980 Macgregor VIP Nike R flex-------- Irons 3 thru PW 1980 Macgregor VIP Hogan Apex shafts--- SW Cleveland 588 Sensicore S-400-- Putter Rusty Santa Fe Bulls Eye Fluted shaft-- Bag Old School Hoofer I had in the stash--- Goes along with my raggety persona

 

 

 

 

Link to post
Share on other sites
  • 3 weeks later...

Driver - 44.5" 5.0 flex 10.5 deg ACCRA tour Z GP MCC4+ 1 deg closed

Irons - 5-pw, GW stnd length 5.0 flex same grip 1 deg flat. Type low medium offset cavity back, no diggers

Wedges - 56 and 60 tour grind wedge spinner and mcc4+ grip 2 flat 10 and 8 in bounce

Putter - 33" 3 deg loft 70 lie, lrg slight line slightly toe hang

Ball - truvis

Carried in a Sun Mountain C-130 USA bag - BE PROUD.

HC - LH but 85 is a good number, playing in Ohio.

Link to post
Share on other sites
  • 1 month later...

Really you have what you need. The Mitchell Plate Ruler is set at 59*; it's accurate enough for every club in the bag. Your setup sounds similar enough that it wouldn't be an issue, so long as the ruler/tape measurer is situated properly.

 

Save your money and use it for stocking up grips or disposable tools like epoxy, ferrules, solvent, tape, shims, extra saw blades, etc.

Link to post
Share on other sites

This is what I use. I have these taped on the walls all over the place.

http://blog.hirekogolf.com/2009/06/measuring-club-length-the-easy-way-%E2%80%93-hireko%E2%80%99s-ruler-buddy/

Taylormade Stage 2 10.5 SK Fiber Helium shaft

taylormade superfast 2.0 3 wood Graphite Design shaft

superfast 2.0 5 wood Aldila NVS shaft

Adams Idea Tech V4 hybrid 4-GW Bassara shaft

Snakeyes forged 52,56,60 wedges Apollo Hump shaft

Odyssey #7 Metal X putter

Bagboy revolver pro bag

Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...