Jump to content
Golfspy_CG2

Titleist Performance Institute Visit

Recommended Posts

Our Sponsors

Now that’s a OEM Tour & Fitting
Great job Rob


Sent from my iPhone using MyGolfSpy

  • Like 1

Rick

 

 

Left Hand, 

Driver; Ping G410 Plus

5 Wood; Cally Steelhead 

5 Hybrid; Cally Steelhead

Irons; Ping G410 5-SW & Mizno 919 Hot Metal 5-SW

Putter; Waaay too many to list

Share this post


Link to post
Share on other sites
So today culminated my couple day visit to Carlsbad, and what a way to wrap it up.  I spent over 1/2 the day at TPI getting fit then meeting with some of the Titleist brand people.

It was simply the best fitting experience I've ever had, and some of you know I've had some pretty darn good ones before.  But from the expanse of the facility, over 30 acres of hitting areas from a 400 yard hole with actual fairway bunkers and lining it to replicate the actual teeing off on a hole, to multiple putting greens, a couple short game areas, it was incredible to take in.  That's not even mentioning the full fledged fitness center inside where the performance evaluation is done. 

I was met at the entry by Joey, who knew my name and welcomed me and showed me to the locker room, where a locker with my name awaited.  After dropping a few things off in the locker we made our way through the tour.   In addition to the above, i was able to watch a bit of some ball testing that was going  on...and guess what they were using a robot just like the MGS Study did.   I can't say much about that testing but it was pretty cool to see the high arching perfectly struck 5 irons going 200 yards down range right at the target.    Needless to say, I didn't see any more of those type  shots during the day. 

After I got warmed up by hitting some shots with my clubs we began getting some trackman numbers.  I had my usual pedestrian numbers that were as follows

IRONS

My current Irons   G700 with Alta CB Sr Flx  1/2 over and 3 degrees up.

SS 73.6 ball speed 94 mph for a 1.29 smash   Spin was low at 4182 carry of 134 peak height of 68 and landing angle of 43.  As has been discussed in some threads here, we amateurs often say we hit the ball too high or at the very least, high enough.  Then when at times we will see numbers like that 68 feet and realize we aren't hitting it high enough.

We started with the T300 and also tried the CNCPT 01.  There wasn't a huge number difference in the number between the two and my contact with the T300 was much more consistent as the CNCPT has an even wider sole than the T300 and that works against me. 

The overall numbers for the T300 were

SS 71.3 ball speed 95.1 for a smash factor of 1.33.  Spin was up to 5790 carry of 136 height was 72 and landing angle of 44.5.   So not a huge difference except for one area, the smash factor.    If you noticed my swing speed dropped but ball  speed went up a bit due to the better contact.  

There was a reason for the decreased ball speed.   The specs of the T300 are standard length and standard lie.  The 1/2 over was causing too inconsistent of a strike and i hit some shots fat, leaving them 10 or more yards short.   With the stock length I was hitting it much more flush.   The 2 degrees upright was causing the heel to hit the turf first on some shots, causing the face to shut down and result in a smothered pull hook.   I had wondered where that shot came from on occasions..ha  Glen feels as I get more confident with the T300 I might regain that 1mph or so in club speed, he sensed I was trying to be too precise in my strike with the T300.   He was probably right.

Going  with a stock lie, again allowed for much cleaner and more consistent contact. We even flirted with a 1/2 inch SHORT shaft and 1 degree Flat.  But the shaft felt a bit heavy--unbeknownst to me he had put a heavier shaft in to account for the shorter length, and there was a bit too much fade for both of our liking,  So I'm now stock/stock/stock...Yee haw, that make buying selling much easier...LOL

DRIVER 

Current Driver TS1 10.5 Fubuki 45g Sr. Flex.

Most know I've loved this driver since getting it in June.   I'll save all the details, It's the right driver for me, but I did better with a 9.5 loft and changed the setting from A3 to  B3, which is a bit more closed.   My spin in the original setup was in the mid 4500's.  and too much fade.   The changes lowered the spin to 2700 and was a straight to very slight cut shot.   I picked up 8 yards of carry and 17 yards total.   Here's the part that blew me away.   Glen said to me, "You just bought a driver this summer, I don't want to  tell you to turn around and buy another new one.   If you will  leave this driver with me, I'll  find a home for it, and send you a new 9.5 out with the same shaft."   He looked to see if he had a new 9.5 on hand and he didn't only the fitting ones.    How awesome is that.

Fairway Wood  & Hybrids

Current Setup G410 3,7 and 9 and 5 hybrid.

Again anyone who followed my posts or progress in the PING Long Game Testing, knows how much these have helped my game this year and how confident I am in them.

Well to make this section short and sweet, after gathering numbers from my 7 and 9 woods, Glen had me hit a Titleist 7 wood just for  Sh$%^and Giggles, as I was getting 1.49 smash factor consistently with the 7w and my ball speed had stayed within 1.5 mph on each shot, the perfect consistency he said.   So after hitting a few good shots with the TS2 7W that had pretty much identical  numbers, he  told me the only reason for me to get that would be if I wanted a Titleist, but said my current set up was as good as I could  get.   How's that for honesty, no  trying  to  spin the numbers or tweak anything to show the Titliest is better.  He just commented that I am a very good  FW player and what currently have works for me. 

WEDGES 

Current SM7 54 and 58, and PING Glide 50

This one was fun and interesting.  He had determined my  pitching wedge distance was probably right at 100 to 105 yards based on my iron data.   So we went to a different teeing area across the complex and set up on a tee box 100 yards from a flag on the front  part of a green.   I hit 3 very solid  shots with my set PW and  he was impressed.   He gave me the PW to the T300 and I hit two pin high within 5 to 10 feet and pulled the third one a bit.   He said enough there. ha

Then we moved up about 15 yards to 85 and he gave me the GW and more of the same.  I was feeling  it with these wedges.   

Then this part was interesting.  He gave me a ball told to walk up to a spot short of the green and drop the ball at a distance I  get a lot of.   I waked to  a shot I eyed balled that I have a lot and dropped the ball.   He asked what club I would hit with this shot, I said the 54 and he gave it to me, lasered it at 45 yards.  He asked how  I  would play it, I said probably fly it 3/4 of the way and let it hit stop and release the last few yards.  

I hit the first two practically perfect but  then I hit 3 in a row fat...egads!!   He said, ok we can fix that. 

Then he asked me other than bunker or flop shots over  a bunker what do  I use the 58 for.   I told him when I'm about 10 yards off the green and there is a front pin about 5 yards or so.   So I like to hit a little 15 or 20 yard hit and stop shot.   He  said, OK I want to  see that.  

When I hit the first two exactly as I  described to  2 feet.  He turned  to Josh and Corey who were watching and said..."Looks whose teaching the short game clinic"   

So the only change we made with the  wedges is he felt  my 54 with the M grind and 8 degrees bounce wasn''t  forgiving enough.   He said to quote Bob Vokey's favorite saying..."Bounce is our friend"   He said we need to go  F grind and 12 degrees bounce.   I hit that from the 40 yard shot and it felt much better and I didn't have  any fat shots. 

So that concluded it.  And I was pretty spent after hitting shots for going on 3 hours.   But the time literally flew.  We chatted a bit, then Josh and Corey took me out to what they said was a well earned lunch

Best Day Ever!

Here's a bunch of random shots.   One thing that I failed at and anyone who has done a fitting can probably relate, and that was getting photos during the fitting. I got so  wrapped up in hitting the  shots then listening to  Glen dissect them, I just didn't think about it. 

 

Don't know who the other two are, but that's ok, they probably had no  idea who I was

1A1BDE63-35AE-4BB2-8D7E-30610F571490.thumb.jpeg.8583ea40d3c012e8e1d34fb0bacdb521.jpeg

One of the fairways getting some early morning acquaintance 7EC14807-8F5E-469C-BD9C-347417662422.thumb.jpeg.56ce08b967fe176643acfaddcec6d2f9.jpeg

An indoor hitting bay that hits out to the fairways, only used on the rare days the weather doesn't permit. 78C3E9E9-4229-4858-947B-E29A22960667.thumb.jpeg.c993bc34c83366f33b62e82d0e7b4eaf.jpeg

A recently over-seeded fairway,  they will  alternate fairways to keep them all pristine. 7A639D6A-5D0A-4E8F-89B1-E6CA43B4FE68.thumb.jpeg.dc0648e0612ca88908c166958c475a86.jpeg

This is where they will do the 4D motion capture as part of the Performance Evaluation Fitting, 27 high speed cameras capture everything you do and the ball does 4BF5D0B1-8B1E-4C74-B5B2-F62CECCF59C2.thumb.jpeg.e3f8f247190559efcb8364c626b684b6.jpeg

These are some members of the player testing panel.  Much like our Most Wanted Testing, local area guys who  have signed up to come in and test new and prototype equipment and balls to give them real world  feedback.   So when MGS tells the doubters that they use real golfers for club tests as do most of the OEM's they meant  what they say. C5E2CD90-C69B-4E34-A02E-53D6C22D2E2F.thumb.jpeg.bd8270ddc4d6d68e116f70c2ca31eed2.jpeg

The nicest boardroom I've ever seen.  How  does anyone concentrate on the meeting in a room like this...ha5D51A2AD-A3A1-4713-8FA9-FD92E87A747F.thumb.jpeg.f6cd73d31fdccbefee31536d3884558c.jpeg

The most pristine putting and practice bunker green I've ever  seen. AE41CF7D-ECDE-496A-BDB8-D0F59EFCD5BE.thumb.jpeg.3f6425289d04f3801bd5dbbc42101d64.jpeg

The area where my fitting will be done   64A8400B-9949-4375-A3D5-8AF439EAA6F5.thumb.jpeg.8bfa5e420c259990c5e6c35cb4a7994d.jpeg

My first target...easy eough 4CFCB4ED-F8D1-4486-B95C-919A80A61CF3.thumb.jpeg.50a46e2d587fce2eb875768514a82146.jpeg

This is taken from a balcony on top of the clubhouse area where they will  entertain or just generally hang out and realize it doesn't get much better than this. CFCED8BF-3177-48ED-9559-16FCFC5C18BC.thumb.jpeg.81f98ff417e502ed3159e2360d94667f.jpeg

79F5256E-3D84-4518-87B0-1586385C3F82.thumb.jpeg.93209b3e53c4926bf1b2c4e7ff0c42b6.jpeg

My new best friend...Josh Talge VP of Marketing for ClubsDBA0F845-575C-4BA1-93C3-7E5B8098CD42.thumb.jpeg.bd92c583a86c873e0a64e56096046c41.jpeg

Glen Mahler...the man is a legend at Titleist

17238A69-8E17-425C-BF5C-BD358D3684B8.thumb.jpeg.4658186e39c989344de874e152cda9c8.jpeg

AE349CA3-CEF2-466F-B566-5A8E0B831BA2.thumb.jpeg.c4ad88cc0a82e82f974c2b2ef15b5599.jpeg

The obligatory Ocean View Selfie!!7E7C6FD1-138C-4ABD-BEB3-A0DACD2956B7.thumb.jpeg.bfb5874a3e7849fe38671edfa1e2c643.jpeg

Great summary! So jealous!!!! What an amazing experience for sure!!!

 

 

Sent from my iPhone using Tapatalk Pro

  • Like 1

Driver: Honma TR20 460, Fujikura Ventus Black 70X

Fwy: Tour Edge Exotics EX9 Tour 17* (playing at 15*), Veylix Rome 888 X

Hybrid: Callaway X2 Hot Pro, 20*, Dynamic Gold X100 

Irons: Srixon Z585 4/5 iron, Z785 6-PW, Modus 120X

Wedges: Vega VC-06 50*/54*/58*, Dynamic Gold S300

Putter: SeeMore Platinum M5 HT Mallet, 36"

Share this post


Link to post
Share on other sites

What a great review. Well done!

  • Like 1

Left Hand orientation

:ping-small: G410 SFT driver 

:cobra-small: F Max 5 wood

:ping-small:  9 wood
:ping-small:  410  Hybrids 22*, 26*
:wilson-small: C300 4i-GP
:cleveland-small:  Wedges RTX 3.0: 52*, 56*
:ping-small: EYE 2 Wedge 60*

:odyssey-small: O Works putter
:918457628_PrecisionPro:NX9-HD

:CaddyTek: - 4 Wheel 
:footjoy-small: - too many shoes to list and so many to buy

:1590477705_SunMountain:

:SuperSpeed: Official Tester 2020   Beginning Driver Speed  - 78

 

Share this post


Link to post
Share on other sites

Great write up and the changes in the irons is perfect example of why fittings are some important. 

the experience sounds awesome. it’s on my bucket list of things to do 

  • Like 1

Driver: Titleist 917D3 9.5 with Graphite Design MAD Pro 65g S

Wood: Titleist 917F2 with UST Mamiya Helium 5F4

Hybrid: Titleist 816H1 21 with Atmos Blue 85 S

Irons: Titleist 718 AP3 4i, 718 CB 5-6, MB 7-9 with KBS $ Taper 125

Wedges: Vokey SM7 46/50/54/60 with DG s200

Putter: Scotty Caemeron Super Rat1

Ball: Titleist Prov1

Share this post


Link to post
Share on other sites

For anyone has their mind made uo they want Titleist clubs.   I think its well worth the cost and time.  The prices are right in line with othet fittings at Club Champion and Truespec.  
 

but the opportunity to hit on grass and have trackman and the fitters eye on the ball flight is the optimum. 
 

Sure there is the cost of getting here if youre nit local on top of the fitting.   But just tell the wife you want the family to go to seaworld and the San Diego Zoo for vacation, then just slip away for a few hours.  🤣

  • Like 3
  • Love 1

:titelist-small: TS1 10.5 Fubuki 45g Shaft

:taylormade-small: SIM Max 5w 18* Ventus Black 

:ping-small:  G410 FW 7,9 Alta CB R flex 

:ping-small: G410 Hybrid 26 degree Alta CB R Flex

:titelist-small: T300 KBS TGI 80 5 iron thorugh 46 W2

:vokey-small: SM7 50.08, 54.08 and 58.14 

:scotty-small:  Phantom 5.5   35" 

:titelist-small: ProV1X Play number 12

 

 

Share this post


Link to post
Share on other sites
35 minutes ago, RickyBobby_PR said:

Great write up and the changes in the irons is perfect example of why fittings are some important. 

the experience sounds awesome. it’s on my bucket list of things to do 

So true.  

On the driver i had followed the fitting specs from PING and my G410 and went with 10.5 because I was getting older and losing speed, so I figured I needed more loft. ...I was wrong. 

By going with a 9.5 it took some loft and most importantly spin off it, smash factor went way up as a result the increase distance with no change in swing speed. 

Oddly enough when I was fit by A Titleist fitter for the 917 three years ago at a TT event he put me in a D3 9.5 for the same reason.  

I should have stayed with that thought. 

 

 

  • Like 3

:titelist-small: TS1 10.5 Fubuki 45g Shaft

:taylormade-small: SIM Max 5w 18* Ventus Black 

:ping-small:  G410 FW 7,9 Alta CB R flex 

:ping-small: G410 Hybrid 26 degree Alta CB R Flex

:titelist-small: T300 KBS TGI 80 5 iron thorugh 46 W2

:vokey-small: SM7 50.08, 54.08 and 58.14 

:scotty-small:  Phantom 5.5   35" 

:titelist-small: ProV1X Play number 12

 

 

Share this post


Link to post
Share on other sites
5 minutes ago, Golfspy_CG2 said:

So true.  

On the driver i had followed the fitting specs from PING and my G410 and went with 10.5 because I was getting older and losing speed, so I figured I needed more loft. ...I was wrong. 

By going with a 9.5 it took some loft and most importantly spin off it, smash factor went way up as a result the increase distance with no change in swing speed. 

Oddly enough when I was fit by A Titleist fitter for the 917 three years ago at a TT event he put me in a D3 9.5 for the same reason.  

I should have stayed with that thought. 

 

 

That’s the one thing that I don’t like about the static fittings on ping or other sites.

the std/std/std on irons is even more interesting 

  • Like 1

Driver: Titleist 917D3 9.5 with Graphite Design MAD Pro 65g S

Wood: Titleist 917F2 with UST Mamiya Helium 5F4

Hybrid: Titleist 816H1 21 with Atmos Blue 85 S

Irons: Titleist 718 AP3 4i, 718 CB 5-6, MB 7-9 with KBS $ Taper 125

Wedges: Vokey SM7 46/50/54/60 with DG s200

Putter: Scotty Caemeron Super Rat1

Ball: Titleist Prov1

Share this post


Link to post
Share on other sites
35 minutes ago, RickyBobby_PR said:

That’s the one thing that I don’t like about the static fittings on ping or other sites.

the std/std/std on irons is even more interesting 

Lol.  You nailed it.  

Before we even got into length he explained his process.   Told me to stand straight ans arms at the side.   When I did.   He said. Perfect.  Now in 30 years in ths business.  I've never seen one person hit a ball from that position. 

It doesn't matter if you are 6'5 or 5'5 or what your wrist to ground length is standing straight. 

It matters how far they are from the ground at impact.  Even at address.  Ideally a highly skilled player will return to the same position.  But most of us are not highly skilled and don't return  to the same position. 

Said the same thing about our board.  A piece of tape may indicate the club is too flat but yet if he sees the ball go left.  He is going to trust what be sees with his eyes, not what a piece of tape and a plastic boars says 

  • Like 4

:titelist-small: TS1 10.5 Fubuki 45g Shaft

:taylormade-small: SIM Max 5w 18* Ventus Black 

:ping-small:  G410 FW 7,9 Alta CB R flex 

:ping-small: G410 Hybrid 26 degree Alta CB R Flex

:titelist-small: T300 KBS TGI 80 5 iron thorugh 46 W2

:vokey-small: SM7 50.08, 54.08 and 58.14 

:scotty-small:  Phantom 5.5   35" 

:titelist-small: ProV1X Play number 12

 

 

Share this post


Link to post
Share on other sites

Enjoyed the post; would love to get out to a place to do a fitting like that and get a real wedge fitting. 

  • Like 3

Driver:  :ping-small: G400 Max 9* with UST Proforce V2
Fairway: :titelist-small: TS3 15* set  w/Project X Hzardous Smoke
Hybrids:  :titelist-small: 816H1 19* set at 18* w/KBS Tour Graphite Hybrid Prototype
                :titelist-small: 915H  21*  w/KBS Tour Graphite Hybrid Prototype
               :titelist-small: 915H 24*  w/KBS Tour Graphite Hybrid Prototype
Irons:      :srixon-small: 765 6-AW with KBS Tour shafts
Wedge:  :cleveland-small: 588 54-14, 58-12
Putter:   :bobby-grace-1: 6330,   :EVNROLL: ER2.2,  :odyssey-small: Ten S 

 

Member:  MGS Hitsquad since 2017697979773_DSCN2368(Custom).JPG.a1a25f5e430d9eebae93c5d652cbd4b9.JPG

 

Share this post


Link to post
Share on other sites
3 hours ago, Golfspy_CG2 said:

For anyone has their mind made uo they want Titleist clubs.   I think its well worth the cost and time.  The prices are right in line with othet fittings at Club Champion and Truespec.  
 

but the opportunity to hit on grass and have trackman and the fitters eye on the ball flight is the optimum. 
 

Sure there is the cost of getting here if youre nit local on top of the fitting.   But just tell the wife you want the family to go to seaworld and the San Diego Zoo for vacation, then just slip away for a few hours.  🤣

^^^^ So much this!

Hitting off real grass HAS to add so much value to a fitting. 

I have a small hitting mat that is supposed to be one of the most real, but I still dont think it can quite replicate sole-real grass interactions. 

  • Like 2

:ping-small: G400 LST 8.5 Ping Tour 65 Stiff

:adams-small: Adams XTD Ti 18 deg 3Hy

:benhogan-small: Ben Hogan PTx 22-46 

:benhogan-small: Ben Hogan TK15 50, 54, 58 deg wedges

:cameron-small: Futura 5.5

Share this post


Link to post
Share on other sites
5 hours ago, RickyBobby_PR said:

That’s the one thing that I don’t like about the static fittings on ping or other sites.

the std/std/std on irons is even more interesting 

I'll admit i wasn't completely shocked.  At the TT event in Wisconsin one of the Titleist staff members in my ground had a brand new set at stock. I hit his 6 a couple times and his 9 once and each one of them were flushed. 

Then at KBS this week in order to try the TGI shaft I asked them to put it on a T300.   Same thing stock specs and I hit them all very well.  

 

  • Like 3

:titelist-small: TS1 10.5 Fubuki 45g Shaft

:taylormade-small: SIM Max 5w 18* Ventus Black 

:ping-small:  G410 FW 7,9 Alta CB R flex 

:ping-small: G410 Hybrid 26 degree Alta CB R Flex

:titelist-small: T300 KBS TGI 80 5 iron thorugh 46 W2

:vokey-small: SM7 50.08, 54.08 and 58.14 

:scotty-small:  Phantom 5.5   35" 

:titelist-small: ProV1X Play number 12

 

 

Share this post


Link to post
Share on other sites
4 hours ago, cnosil said:

Enjoyed the post; would love to get out to a place to do a fitting like that and get a real wedge fitting. 

Yeah the wedge part was great. I could have spent another hour at least there hitting wedge shots off that turf and into those greens.  

  • Like 3

:titelist-small: TS1 10.5 Fubuki 45g Shaft

:taylormade-small: SIM Max 5w 18* Ventus Black 

:ping-small:  G410 FW 7,9 Alta CB R flex 

:ping-small: G410 Hybrid 26 degree Alta CB R Flex

:titelist-small: T300 KBS TGI 80 5 iron thorugh 46 W2

:vokey-small: SM7 50.08, 54.08 and 58.14 

:scotty-small:  Phantom 5.5   35" 

:titelist-small: ProV1X Play number 12

 

 

Share this post


Link to post
Share on other sites

I guess now we know what “Golfer” heaven is like


Sent from my iPhone using MyGolfSpy

  • Like 2

Rick

 

 

Left Hand, 

Driver; Ping G410 Plus

5 Wood; Cally Steelhead 

5 Hybrid; Cally Steelhead

Irons; Ping G410 5-SW & Mizno 919 Hot Metal 5-SW

Putter; Waaay too many to list

Share this post


Link to post
Share on other sites
22 minutes ago, Rickp said:

I guess now we know what “Golfer” heaven is likeemoji106.png


Sent from my iPhone using MyGolfSpy

Indeed.  There was even a gatekeeper that let me in.   Guess Saint Peter deemed me worthy enough 😜

  • Like 2
  • Haha 1

:titelist-small: TS1 10.5 Fubuki 45g Shaft

:taylormade-small: SIM Max 5w 18* Ventus Black 

:ping-small:  G410 FW 7,9 Alta CB R flex 

:ping-small: G410 Hybrid 26 degree Alta CB R Flex

:titelist-small: T300 KBS TGI 80 5 iron thorugh 46 W2

:vokey-small: SM7 50.08, 54.08 and 58.14 

:scotty-small:  Phantom 5.5   35" 

:titelist-small: ProV1X Play number 12

 

 

Share this post


Link to post
Share on other sites

Awesome stuff - thanks for sharing your experience!


Sent from my iPhone using MyGolfSpy

  • Like 2

Ping G410 - set at 12 degrees, fade setting - Alpha Distanza 40 weak R flex shaft

Tour Exotics EX 10 3 wood

Ping G410 5-9 wood

G30 6-PW -  Aerotech FT 500 shafts

SCOR 48,52,58

EVNRoll ER 5

Titleist Pro VIx optic yellow with revkev stamped on them

Share this post


Link to post
Share on other sites
4 hours ago, Golfspy_CG2 said:

I'll admit i wasn't completely shocked.  At the TT event in Wisconsin one of the Titleist staff members in my ground had a brand new set at stock. I hit his 6 a couple times and his 9 once and each one of them were flushed. 

Then at KBS this week in order to try the TGI shaft I asked them to put it on a T300.   Same thing stock specs and I hit them all very well.  

 

I can’t wait to hear about the looks on guys faces on the course when you tell them you are standard l/l/l

  • Like 1

Driver: Titleist 917D3 9.5 with Graphite Design MAD Pro 65g S

Wood: Titleist 917F2 with UST Mamiya Helium 5F4

Hybrid: Titleist 816H1 21 with Atmos Blue 85 S

Irons: Titleist 718 AP3 4i, 718 CB 5-6, MB 7-9 with KBS $ Taper 125

Wedges: Vokey SM7 46/50/54/60 with DG s200

Putter: Scotty Caemeron Super Rat1

Ball: Titleist Prov1

Share this post


Link to post
Share on other sites
58 minutes ago, RickyBobby_PR said:

I can’t wait to hear about the looks on guys faces on the course when you tell them you are standard l/l/l

A couple of them whose specs are 1/2 long a drive 2 up are going to be upset that the hand me downs no longer fit.  😎

  • Like 3

:titelist-small: TS1 10.5 Fubuki 45g Shaft

:taylormade-small: SIM Max 5w 18* Ventus Black 

:ping-small:  G410 FW 7,9 Alta CB R flex 

:ping-small: G410 Hybrid 26 degree Alta CB R Flex

:titelist-small: T300 KBS TGI 80 5 iron thorugh 46 W2

:vokey-small: SM7 50.08, 54.08 and 58.14 

:scotty-small:  Phantom 5.5   35" 

:titelist-small: ProV1X Play number 12

 

 

Share this post


Link to post
Share on other sites
1 hour ago, Golfspy_CG2 said:

A couple of them whose specs are 1/2 long a drive 2 up are going to be upset that the hand me downs no longer fit.  😎

Like the little bro who needs to grow into the hand me downs 

  • Like 1

Driver: Titleist 917D3 9.5 with Graphite Design MAD Pro 65g S

Wood: Titleist 917F2 with UST Mamiya Helium 5F4

Hybrid: Titleist 816H1 21 with Atmos Blue 85 S

Irons: Titleist 718 AP3 4i, 718 CB 5-6, MB 7-9 with KBS $ Taper 125

Wedges: Vokey SM7 46/50/54/60 with DG s200

Putter: Scotty Caemeron Super Rat1

Ball: Titleist Prov1

Share this post


Link to post
Share on other sites

So glad I read your fitting experience and saw your pics! I will make sure my wife takes pics of the action during the fitting if she's allowed in to watch. I'm very excited as it looks like a great experience!!!

  • Like 1

Driver: Titleist TS2 8.5*/ Project X Evenflow white 1100 65gr. stiff
Fairway: Titleist 915 Fd 13.5*/ Project X Evenflow white 1100 75gr. stiff
Hybrid/ Driving Iron: Titleist TS3 19*/ Mitsubishi Tensei Black 100gr. x stiff
Irons: Mizuno JPX 919, 4-9/ Nippon Modus Pro 120 x stiff
Wedges: Vokey SM6 46*F/TT DG x100
Wedges: Vokey SM6 50*F/ TT DG x100
Wedges: Vokey SM6 54*M/ TT DG s200
Wedges: Vokey Hand Ground SM5 58*T/ TT DG Tour Issue S400
Putter: Scotty Cameron Monterey 35"
Ball: Titleist Pro AVX

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

×
×
  • Create New...