Jump to content
chisag

P790 4-pw Steelfiber i95 s-flex

Recommended Posts

I am selling a set of P790's with band new, never used Steelfiber 95 Stiff Flex shafts with upgraded Tour Velvet grips that are all new and unused. I have removed the paint fill to give them a unique clean look. Some of the faces show a little wear but the grooves are in excellent condition. Very little bag chatter and no dings or scratches. BONUS!!! I will include the original DGX100 VSS shafts that are also new and never used along with the stock grips. 

The specs are 1/2" long and D3 swing weight, 1* upright and the 5-pw are 1* weak, the 4 iron standard loft. I own a Mitchell Loft/Lie Machine and can bend any or all of these irons to your personal specs. The 4-pw sells for just over $1600 with Steelfiber and Tour Velvet grips and the DGX100 VSS shafts are $250 for a total of $1850 new. 

I am selling these for only $799 $749 shipped!!!



697106756_790heads2.thumb.JPG.532341d85af07f319ed1e34d47131e8e.JPG74928101_790faces.thumb.JPG.a0eaae5712fcee07472f2e22996051cf.JPG383792045_790soles.thumb.JPG.1c6ba27a27b2876f3374a1781765f430.JPG1179525010_790clubs.thumb.JPG.2c643b98ac490bb8cdb42f563f1a5fa0.JPG1200481693_790i95s.thumb.JPG.3ce6e9a0e0e56254ece91fb973f821d0.JPG1228520893_790dgxshafts.thumb.JPG.57fcf5574febc3831abe363b6a967d79.JPG28974250_790dgxshaftlabels.thumb.JPG.3d09dd4de0766587b160edea4279cfeb.JPG

Share this post


Link to post
Share on other sites

Great deal and they look fantastic. GLWS


Sent from my iPhone using Tapatalk

  • Like 1

Share this post


Link to post
Share on other sites

... Answering a question here:

Yes, I will sell these P790's with standard length, new an unused grips/DGx 105's for $599 $549 shipped!!!!!!

  • Love 1

Share this post


Link to post
Share on other sites

Dang, wish I was located close enough to give these a try.  I've challenged myself to see if I can find a players category club that I can hit as well or better than my G410's. Really thinking more along the lines of forged, but these might be an option.  I think these would be a good graphite shaft for me but dunno.  The two composite shafts I tried as part of my fitting were stiff; one the PING and the other I cannot recall. I played 1/2" long for years and the recent change to +1 was a borderline call to help move strike zone closer to center.  Swingweight on my G410's is D2, so maybe a D3 with lighter shaft would be good. Are these 2018 year?

Share this post


Link to post
Share on other sites

... Yup, the 2018's. I have not hit G410's so I can't compare but fwiw, I do think the P790's are the most forgiving players irons I have hit. The Steelfibers are a very interesting shaft. Many want a dampened feel with graphite so Recoils are very popular, but Pro's that have hit millions of steel shafted iron shots find they dampen the feel too much. So Steelfibers are the most popular shaft because they give you the benefits of graphite with less stress on your joints but a feel about halfway between steel and typical graphite, maybe even a little close to steel so the best of both worlds. 

  • Like 1

Share this post


Link to post
Share on other sites

I promised myself not to buy clubs until I get a few lessons under my belt so I can get a better fit...but dang what a set. You're not making it easy on me!

  • Like 2

Share this post


Link to post
Share on other sites
1 minute ago, ncwoz said:

I promised myself not to buy clubs until I get a few lessons under my belt so I can get a better fit...but dang what a set. You're not making it easy on me!

 

... LOL, that was the goal. 😉

  • Like 1

Share this post


Link to post
Share on other sites
27 minutes ago, ncwoz said:

I promised myself not to buy clubs until I get a few lessons under my belt so I can get a better fit...but dang what a set. You're not making it easy on me!

One of us should do the other a BIG favor 😉.

  • Haha 1

Share this post


Link to post
Share on other sites

... But Wait, there's MORE:

To sweeten the pot and further tempt you two, I will sell the P790's with the Steelfiber shafts for $699 $649.(without including the DGx shafts)

Steelfiber shafts only have been SOLD!!!

  • Like 1

Share this post


Link to post
Share on other sites
On 11/26/2019 at 7:16 PM, chisag said:

... Answering a question here:

Yes, I will sell these P790's with standard length, new an unused grips/DGx 105's for $599 shipped!!!

These would fit me perfectly...if only they were lefty sticks! 
 

Someone buy these, this is a heck of a deal! 

Share this post


Link to post
Share on other sites

... I really thought these would have sold by now so:  ONLY PRICE DROP before going to eBay!!!

New an unused grips and Steelfiber shafts $799 $749 SOLD (including the DGx shafts)

New an unused grips/DGx 105's for $599 $549 shipped!!!

New and never used C-Taper stiff flex with stock TM unused grips I can install for $599 shipped!!! 

Share this post


Link to post
Share on other sites

... I completely forgot I have a set of new and never used C-Taper stiff flex with stock TM unused grips I can install for $599!!! 

Share this post


Link to post
Share on other sites

Unfortunately, I think I'm out. But good luck selling them! That's a great set.

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.


×
×
  • Create New...