Golfsmith pro forged irons heads what tip of shaft to use

[Mac 59]

What tip fits in golfsmith pro forged iron heads

[cnosil]

with a quick google search  I found the following:

https://www.golfclubspec.com/iron_results.php?id=79

https://www.equip2golf.com/specifications/specs_frameset.html?golfsmith/golfsmith_pro_forged.html~specs

 

Based on those sites .370

 

[03trdblack]

There were very few components (if any) from Golfsmith that used .355 shafts.  .370 tip gave more fitting options for the club maker.

[10shot]

If the head will allow, drill them out to .370

[03trdblack]

2 hours ago, 10shot said:

If the head will allow, drill them out to .370

Ream, not drill

[10shot]

On 12/12/2019 at 6:02 PM, 03trdblack said:

Ream, not drill

You may ream, however, I drill with a very tight quilled drill press. I do ream if going up in a smooth bore. I drill tapered tips to remove material, either will work as long as you have the correct equipment. I use the Mitchell club head vise with a Wilton quill. Keep this in mind if you only ream. You create a straight edge hosel which can and will cause a cut point. When I enlarge hosels I crown the hosel for a collar ferrule or to remove the cut point.

Merry Christmas and may you shoot a 59

[Sparky14]

Those were .370 heads.