Jump to content

Evenflow anyone?


Recommended Posts

Just asking, partly because I'm curious and partly because I'm getting ready to buy a driver and am looking at options. Reading the material on the Project X Evenflow has made me curious. I used to be a shaft junkie and kept up with anything and everything shaft related. But having a wife and kids has changed priorities a little bit, so now if I see something new it's a pretty safe bet I don't know much about it. So has anyone played an Evenflow? I haven't used the Hzrdus line either, so I know very little about them. I hit my driver 275-280, I have a quick transition, and a short fairly quick swing, if that helps any. The 2 shafts I currently have for my F7+ are a KuroKage cb an a Wave. Both shafts work for me, I'm just looking at other options. I'd like to go to ClubChampion and get fit, but I don't know if that's going to happen.

  • Like 2
Link to post
Share on other sites
  • Replies 48
  • Created
  • Last Reply

Top Posters In This Topic

Top Posters In This Topic

Popular Posts

... Amen brother. As a smooth swinger around 100mph the EF Blue is an excellent shaft for me and I will start out the season with it in my new Speedzone 5 wood. The RF Blue has worked very well for me

I just ordered a set of TS3s with the Evenflow White 6.5 in them. Getting an 8.5* driver with 75g shaft, 13.5* 3 wood with 85g shaft, and 19* hybrid with 105g shaft. I got fit for them at a Titleist T

I have demoed and tried every evenflow shaft and none of them work for me. Black, blue, white. Just doesn't matter. The overarching profile of the evenflow line just doesn't mesh with my swing. 

Posted Images

Can't speak to the driver shaft, but I have two ping crossovers with evenflow black shafts. Love them and find it as a great compliment for my swing as well as club. 

I have tried them in a rogue before as well but didn't get along with the rogue so can't say much there. 

Good idea going to get fit, definitely think it would be worth while with all the different stock shaft offerings and options in general.

  • Like 1

 ⛳🛄 as of Sept 24, 2020

SuperSpeed 2020 from 100-112 and climbing!

Driver:   :callaway-small: Epic Sub Zero - Set at 10* with Aldila Rogue Max 65 gram 

Wood:    :cobra-small: F7 3 wood 14.5* w/ weight back

               :ping-small: G410 Crossover - 2 and 4 iron

Irons:     :ping-small: i210 5-U w/ Nippon Modus 105 stiff (2018 Tester)

Wedge:  :ping-small: Glide 2.0 54* 58* w/ Nippon Modus 105 Stiff

Putter:   :odyssey-small: Stroke Lab 7 35* and oversized grip (2019 Tester)

Balls:      :srixon-small: Z Star

Other:     :Arccos: 360 (Caddie)

Link to post
Share on other sites

I have demoed and tried every evenflow shaft and none of them work for me. Black, blue, white. Just doesn't matter. The overarching profile of the evenflow line just doesn't mesh with my swing. 

Just goes to show the importance of fitting. 

  • Like 3

In my :mizuno-small: BR-D4 Stand Bag

:ping-small: G410 LST 9* VA Nemesys 65X
:ping-small: G410 LST 14.5* Tour AD DI 7X
:titelist-small: 818 H2 20* Tour AD DI 85X
:mizuno-small: MP20 HMB 4 Tour AD 95X
:mizuno-small: JPX 919 Tour 5-PW Oban CT 115 X(-)
:titelist-small: Vokey SM7 50F - 54S - 59D
:scotty-small: Phantom X 5.5 (2021)
:titelist-small: ProV1
Link to post
Share on other sites
32 minutes ago, jlukes said:

I have demoed and tried every evenflow shaft and none of them work for me. Black, blue, white. Just doesn't matter. The overarching profile of the evenflow line just doesn't mesh with my swing. 

Just goes to show the importance of fitting. 

 

... Amen brother. As a smooth swinger around 100mph the EF Blue is an excellent shaft for me and I will start out the season with it in my new Speedzone 5 wood. The RF Blue has worked very well for me in driver, fw wood, hybrid and DI. I also tried the EF Black in my driver and even though it is still a very smooth feeling shaft and I had some success with it, it did not load-unload as well as the Blue and I found myself starting to over swing.

... While it is impossible to making generalizations about any shaft (or club) that will apply to all players, I think smoother swingers generally do well with the EF Blue and even stronger swingers do well with the EF Black. Additionally some hitters also like the EF Black because of it's smooth profile, but stronger more aggressive hitters will most likely not care for it at all. So basically adding to what jlukes said, you can find shafts that might fit your swing by profile and that is always a good starting point, but unless you are very familiar with exactly what kind of shaft works for you, it is always wise to get fitted. And even if you know what works for you, a fitting is never a bad idea. 

  • Like 5

Driver:   TaylorMade SIM2 Max ... Diamana Limited 60R
Fairway:  Cobra SZ 14.5* ... Atmos Blue TS 7S
Utility:   Callaway Super Hybrid 17*   ... Diamana Limited 65R
               TaylorMade DHy 19* ... Diamana Limited 65R
Irons:    4-Pw Cobra King Tour MIM ... Nippon 950gh r-flex
Wedges:  Cobra Snakebite 50* ... Nippon 950gh r-flex
                 Mizuno T20 58* ... Nippon 950gh r-flex
Putter:  Cleveland Hunting Beach Soft 11S 33.5"
Ball:      TaylorMade TP5x (2021)

Link to post
Share on other sites

I was intrigued by the Even Flow line I took a punt and got one for my M5 and have been very very happy with it. I love it so much I was happy to see it was an option in the Tour Edge hybrid I was chosen to test. It performed in the hybrid as well as it did in the driver, so much so, when I ordered my @GolfSub70 3 wood, I got it in that as well. So, you can see I'm a convert. But, I'd get fit rather than go out on a limb like I did.

Now to try my luck with the new Riptide.

  • Like 3

In the bag:
Driver: :titelist-small: TSi2 Project X HZRDUS Smoke Black RDX 6.0
Fairway: :Sub70: 939X 15° Project X Even Flow Blue 6.0
Hybrid: :Sub70: 939X 3 Hybrid Project X Even Flow Riptide 6.0
Irons: :wilson_staff_small: D7 Forged 4-GW Project X Catalyst 80 6.0
Wedge: :cleveland-small: Smartsole S
Putter :yes-small: Tracy
Bag: 
:Ogio: Alpha Convoy 514
Balls::Snell: MTB-X or Black

Cart: :CaddyTek: CaddyLite ONE Ver. 8


God Bless America🇺🇸, God save the Queen🇬🇧, God defend New Zealand🇳🇿 and thank Christ for Australia🇦🇺!

Link to post
Share on other sites

Like[mention=12972]MattF[/mention] I also have experience with these shafts from testing the exotics hybrid last year.

 

While it’s not a driver shaft, the profiles are similar. I chose the black in a stiff and I am very pleased with its performance...pleased enough that it’s staying in my bag without any need to tweak it.

 

Project X has worked best for me since my last fitting and I haven’t found anything better to make me change. I have a quick tempo swing and my driver SS is between 110-115 depending on the day. That puts me in an approximately 275-285 distance range depending on the weather.

 

I would have no issue putting the Even Flow black in my driver but the Hzrdus Yellow hits all the marks for me at the moment.

 

If you’re curious, you may be able to find a gently used one on eBay for not a lot of money.

 

 

Sent from my iPhone using MyGolfSpy

 

 

  • Like 2
  • PING G400 LST 8.5 Evenflow Black 65g 6.5
  • TaylorMade SIM2 3 wood Fujilkura Ventus Blue 7-X
  • Mizuno HMB MP20 3i Nippon Modus 3 120S
  • Ben Hogan PTx Combo Nippon Modus 3 120S
  • TaylorMade MG2 TW 56 & 60 Nippon Modus 3 120S
  • Scotty Cameron Phantom X 11.5
  • TaylorMade TP5

 

Western, NY

5.7 Index

Link to post
Share on other sites

PX designed the hzrdus line for performance and feel was left out. When they designed the evenflow line they yes feel first while not sacrificing performance. The only difference between black and blue is the black has a slightly stiffer tip. The White is going to play stiffer than the black and will have lower launch and spin.

One that gets quick in transition or pulls hard on the handle probably won’t like the feel of them. They are a great shaft if they mesh with your swing. Like @jlukes I don’t get along with them. 

  • Like 1

Driver: PXG 0811 X+ Proto w/UST Helium 5F4

Wood: TaylorMade M5 5W w/Accra TZ5 +1/2”, TaylorMade Sim 3W w/Aldila rogue white

Hybrid: PXG Gen2 22* w/AD hybrid

Irons: PXG Gen3 0311T w/Nippon modus 120

Wedges: TaylorMade MG2 50*, Tiger grind 56/60

Putter: Scotty Caemeron Super Rat1

Ball: Titleist Prov1

Link to post
Share on other sites

I picked up the Epic Flash driver a few weeks ago and I was actually really surprised how much I liked the stock Evenflow green that comes with it (I went with Stiff, 55g). Love the feel and I've been hitting it great with good launch conditions and consistency. And... I didn't have to spend a few hundred bucks to get a different shaft. 

On a similar note, I also tried the Evenflow Riptide orange that comes with the new Mavrik and I absolutely hated it; felt really whippy throughout the swing and my dispersion was all over the place. There was a noticeable difference between the two.  

  • Like 3

Driver:  Callaway Epic Flash 9° w/ GD Tour AD DI-6X

3wd:  TaylorMade SIM 15° w/ GD Tour AD DI-7S

2h: Callaway Big Bertha Alpha 815 17° w/ Fujikura Speeder 865 Stiff

4h: Callaway XR Pro 23 w/ Project X LZ 6.0

5i - PW: PXG 0311T w/ Project X LZ 6.0

Wedges: Callaway MD3 50°, Titleist SM7 54° and 58°

Putter: TaylorMade Spider Tour

Ball: Titleist ProV1x

 

Link to post
Share on other sites
  • 3 weeks later...
On 2/29/2020 at 2:45 PM, therod said:

Just asking, partly because I'm curious and partly because I'm getting ready to buy a driver and am looking at options. Reading the material on the Project X Evenflow has made me curious. I used to be a shaft junkie and kept up with anything and everything shaft related. But having a wife and kids has changed priorities a little bit, so now if I see something new it's a pretty safe bet I don't know much about it. So has anyone played an Evenflow? I haven't used the Hzrdus line either, so I know very little about them. I hit my driver 275-280, I have a quick transition, and a short fairly quick swing, if that helps any. The 2 shafts I currently have for my F7+ are a KuroKage cb an a Wave. Both shafts work for me, I'm just looking at other options. I'd like to go to ClubChampion and get fit, but I don't know if that's going to happen.

Is that carry or total distance? If you like a Kuro Kage CB, I don't think the Evenflow Blue will work for you. I can't speak for the Black which is hear is somewhat counterbalanced, but not extreme. With your aggressive transition, unless you like to feel a lot of load and unload in your shafts (like the Tour AD Di or the original Blue Speeder Evolution), I think you'll find the Hzrdus to be more manageable. If you play a heavy head and a club at 45 inches, you might want to try their CB options - Hzrdus Yellow or Smoke Yellow or T1100 (the original Handcrafted $$). Would help to get more info like your preferred playing length, SS, Swingweight preferences. 

image.png.1415d20f5fde9c8e2717e5529344485f.png

image.png

image.png

image.png

image.png

Link to post
Share on other sites

Was looking at the eve flow for a little while, but tested into a Hzrdus Yellow 75 6.5 with ~110 avg SS... loved it but the miss would always be a push right (as I normally play a draw).  I recently switched to the Hzrdus Black 75 6.5 and absolutely love it.  Almost canceled out the right push.  The Hzrdus line and definitely the black get heat from people for feeling like telephone poles, but I love the stability.  The black helped me with dispersion and with a slightly lower launch angle (I also turned my g400LST down from 8.5 to 7.5 <I think> so that helped with launch) but I’ve picked up distance with better dispersion.

 

id recommend trying shafts on a monitor to see the numbers, but since the new driver will probably be really easy to swap out shafts, you can always pick up a used one and then sell it if it doesn’t work?

 

happy swinging

Link to post
Share on other sites
Was looking at the eve flow for a little while, but tested into a Hzrdus Yellow 75 6.5 with ~110 avg SS... loved it but the miss would always be a push right (as I normally play a draw).  I recently switched to the Hzrdus Black 75 6.5 and absolutely love it.  Almost canceled out the right push.  The Hzrdus line and definitely the black get heat from people for feeling like telephone poles, but I love the stability.  The black helped me with dispersion and with a slightly lower launch angle (I also turned my g400LST down from 8.5 to 7.5 so that helped with launch) but I’ve picked up distance with better dispersion.
 
id recommend trying shafts on a monitor to see the numbers, but since the new driver will probably be really easy to swap out shafts, you can always pick up a used one and then sell it if it doesn’t work?
 
happy swinging

I was in a similar boat as you when I was fit for my LST 2 years ago. SS was 112-116 and I was hitting the 6.5 yellow in an 8.5 non-adjusted head. Typical flight was straight and a few push blocks. The fitter wanted me to take the 6.5 but I insisted on the 6.0 for the days I wasn’t hitting it well. It was the correct choice and I haven’t looked back.

The Even Flow in my hybrid gives me the stability but a liiittle bit better feel. If money was no object I’d try a 65 Black in my LST for fun.
  • PING G400 LST 8.5 Evenflow Black 65g 6.5
  • TaylorMade SIM2 3 wood Fujilkura Ventus Blue 7-X
  • Mizuno HMB MP20 3i Nippon Modus 3 120S
  • Ben Hogan PTx Combo Nippon Modus 3 120S
  • TaylorMade MG2 TW 56 & 60 Nippon Modus 3 120S
  • Scotty Cameron Phantom X 11.5
  • TaylorMade TP5

 

Western, NY

5.7 Index

Link to post
Share on other sites
  • 4 weeks later...

Got fit for a TS3 13.5 3 wood with T1100 6.5 75G White last year with a trackman. Numbers were awesome. Feel of the shaft was great. Felt smooth in swing trasnistion and stout at impact. Didn't end up buys the club.

Recently discovered a crack in my G400 LST at the hosel. Sent it back to ping and ping thankfully replaced it with a G410 LST but used a even flow black 6.5 75G. 

Hopping to get out soon to get some swings in and see how the club suits me nervous and excited at the same time.

Link to post
Share on other sites

I picked up a G400 LST driver this winter and have been using it indoors. It has the evenflow black.

I have really liked it. I've found it helps me slow my swing down and keep my transition smooth. It does launch low for sure, but it's been a great combo for me.

The name of the shaft says it all. If you have an aggressive swing or transition, you will not feel good about it. I would be happy to answer any questions you have. I swing right around in the 105 range if that helps.

WITB

 

Driver- PING G400 LST w/ Project X Evenflow Black

Fwy- TM Aeroburner 16.5HL

Irons- Callaway Steelhead XR (3-PW)

Wedges- Callaway MD3 (50,54,58)

Putter- Cleveland TFI Satin Cero

Ball-  Snell MTB-X

Link to post
Share on other sites

The evenflow line other than the white which is very different from the rest are all good shafts. Very linear in profile going from stiff to soft from but to tip. The only difference being how steep the line is. Meaning how fast they lose that stiffness. 
 

Linear profiles have a few decent features, overall they typically feel smoother. They are also typically a bit more active feeling.

shafts with linear profiles work best generally for players with a smoother transition. Of course there are always exceptions and this is just a general rule.

the white is different in that it is stiffer in the tip and butt and softer in the middle. Interestingly tipping it more will make it play softer, not stiffer as is the case for many and the reason most tip a shaft more. To stabilize the tip. 

Driver: SIM 9 Motore X F1 7X tipped 1 inch

Utility Iron: Cobra King Utility irons 18 degree Aldila rogue 90 X

Irons: Cobra King forged CB 4-PW KBS $ Taper 130 X

Wedges: Cleveland 49,52.58.64

Putter: Kronos Release.

Link to post
Share on other sites
On 4/3/2020 at 6:47 PM, FilOfFuture said:

Was looking at the eve flow for a little while, but tested into a Hzrdus Yellow 75 6.5 with ~110 avg SS... loved it but the miss would always be a push right (as I normally play a draw).  I recently switched to the Hzrdus Black 75 6.5 and absolutely love it.  Almost canceled out the right push.  The Hzrdus line and definitely the black get heat from people for feeling like telephone poles, but I love the stability.  The black helped me with dispersion and with a slightly lower launch angle (I also turned my g400LST down from 8.5 to 7.5 <I think> so that helped with launch) but I’ve picked up distance with better dispersion.

 

id recommend trying shafts on a monitor to see the numbers, but since the new driver will probably be really easy to swap out shafts, you can always pick up a used one and then sell it if it doesn’t work?

 

happy swinging

I am wanting to update my driver shaft and just seem drawn in to these Hzrdus Black. I have a high swing speed. Between 110-115 but I normally play a fade. My current shaft is a S 55 gram stock with my PING G400. I turned down from a 9 to a 8.5 so I don't balloon as often. Thinking the shaft you mentioned might help me eliminate all together and prevent my baby fade to a slicer. Especially when I grip it and rip it haha

Use :Arccos: for all clubs. Love the feedback and caddie options the app provides.

Driver: :ping-small: G400 with stock 55gram stiff flex. Just ordered a EvenFlow 75 gram stiff flex. Pumped!

3Wood: :callaway-logo-1: Epic Flash

Hybrid: :taylormade-small: 3 RBZ Rescue

Irons 5 thru A wedge: Sub70 699 irons. Project X Rifle shafts. XStiff

54° Wedge: :cleveland-small: RTX4

60° Wedge: :callaway-logo-1: MD4

Putter: :1332069271_TommyArmour: MyGolfSpy Most Wanted 2 years in a row!

Ball:  :srixon-small: ZStar. New believer 

Link to post
Share on other sites
I am wanting to update my driver shaft and just seem drawn in to these Hzrdus Black. I have a high swing speed. Between 110-115 but I normally play a fade. My current shaft is a S 55 gram stock with my PING G400. I turned down from a 9 to a 8.5 so I don't balloon as often. Thinking the shaft you mentioned might help me eliminate all together and prevent my baby fade to a slicer. Especially when I grip it and rip it haha

I’ve got two uncut Even Flow black shafts (65g 6.5 flex) that I’m going to list tomorrow. If you want one PM me.
  • Like 1
  • PING G400 LST 8.5 Evenflow Black 65g 6.5
  • TaylorMade SIM2 3 wood Fujilkura Ventus Blue 7-X
  • Mizuno HMB MP20 3i Nippon Modus 3 120S
  • Ben Hogan PTx Combo Nippon Modus 3 120S
  • TaylorMade MG2 TW 56 & 60 Nippon Modus 3 120S
  • Scotty Cameron Phantom X 11.5
  • TaylorMade TP5

 

Western, NY

5.7 Index

Link to post
Share on other sites

I just ordered a set of TS3s with the Evenflow White 6.5 in them. Getting an 8.5* driver with 75g shaft, 13.5* 3 wood with 85g shaft, and 19* hybrid with 105g shaft. I got fit for them at a Titleist Thursday hosted at my local course and they felt really good. We tried the black and the white, ultimately settling on the white since I added weight to my clubs. A really good feeling shaft with my swing, which is fairly even tempoed. As mentioned above, I feel like it helps me maintain a smooth swing and not speed up which is my tendency when tired. And for my swing, the low launch is perfect.

  • Like 4
Link to post
Share on other sites

I have had issues with getting my 3 wood to launch high enough. So when I upgraded my 3 wood to a PXG 0341 I put an Even Flow Blue shaft in it and I like my ball flight much better now.

  • Like 3

:taylormade-small: Supreme Hybrid Stand Bag

:ping-small: G400 Max 10.5° w/HZRDUS Smoke Black

 image.png 0341 3 wood 15° w/Project X Even Flow Blue

:ping-small: G30 Hybrid 3 19° w/TFC 419H

 237E457C-550E-40CE-B307-BB11B9B6B4A0.jpeg.0a1ea2f794d73d0896d726040c6a1252.jpeg NLU-01 18° Utility w/Mitsubishi Kura Kage Black

:ping-small: G410 Crossover 4 23° w/Mitsubishi Tensei Blue

 image.png 0211 irons 5-GW w/True Temper Elevate

:callaway-small: Mack Daddy CB 54°/14° W-Grind w/KBS HI-REV 2.0 105

:EVNROLL: ER7 34”

image.png.11327db90df1932c3b37a9451ae0c6af.png MTB-Black

Link to post
Share on other sites

Currently and have been loaded with the EvenFlow Hzrd Black on my M6 driver for the past two years and absolutely love it.. I haven't experienced that much of a variety in Driver shafts over my years as I was always comfortable with the stock ones that came with them, however the performance is and was noticeable the minute i got fitted and took it to the course.  

  • Like 1

Brock C Davison 

Things To Know :

  • I hit my 7-iron like John Daly hits the 3
  • Brands I Stand By: Peter Millar, Taylormade, PING, Seamus, and of course Titleist 
  • Favorite Golfer Of All Time: Payne Stewart & Freddy "Boom Boom
Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...