Jump to content

New with Questions


Recommended Posts

Our Sponsors

Good day,

I'm new to posting and setting up the profile. I'm confused as I have tried to fill out my profile several times and it says only 4% complete. When I click next it goes no where.  What am I missing?

Also, I posted a cover picture which was easy.  However, every time I try and post a profile picture it says the file is too large.  I've cropped photos and it still is too big.  What am I missing?

Thank you in advance.

  • Like 1

:callaway-small: Epic Flash Sub Zero 9degree. Hosel set to -1degree/Nuetral. Aftermarket 10gram front weight and 6.5 gram sliding weight set to fade. Mitsubishi  Tensei AV Blue Stiff 67 “Tipped” half inch

Diablo 5 Wood Nuetral Stock shaft

:taylormade-small: M3 3 Hybrid Mitsubishi Tensei Blue Weight set to fade

:mizuno-small: JPX 850 Forged 4-GW KBS C Taper Stiff 1/2 inch longer 

:callaway-small: Mac Daddy 4 54, 58

:odyssey-small: Works Tank Cruiser 7              40 Grams in head and counterbalanced 30 grams inside Super Stroke Fatso Grip

:srixon-small: Z-Star

Link to post
14 minutes ago, T2Grn said:

Good day,

I'm new to posting and setting up the profile. I'm confused as I have tried to fill out my profile several times and it says only 4% complete. When I click next it goes no where.  What am I missing?

Also, I posted a cover picture which was easy.  However, every time I try and post a profile picture it says the file is too large.  I've cropped photos and it still is too big.  What am I missing?

Thank you in advance.

Try saving the photo as a compressed size. We have to do this in reviews because the true photo size is too big and would take forever to load. A simple app like Pixlr is the one I have used... Save the picture and it gives a option for pixel sizes. 

Pretty sure I had to do that with my profile pictire too.

Hope this helps...

As for the 4% I have no idea. Yours looks pretty complete and done up! 

  • Like 2

 ⛳🛄 as of Sept 24, 2020

SuperSpeed 2020 from 100-112 and climbing!

Driver:   :callaway-small: Epic Sub Zero - Set at 10* with Aldila Rogue Max 65 gram 

Wood:    :cobra-small: F7 3 wood 14.5* w/ weight back

               :ping-small: G410 Crossover - 2 and 4 iron

Irons:     :ping-small: i210 5-U w/ Nippon Modus 105 stiff (2018 Tester)

Wedge:  :ping-small: Glide 2.0 54* 58* w/ Nippon Modus 105 Stiff

Putter:   :odyssey-small: Stroke Lab 7 35* and oversized grip (2019 Tester)

Balls:      :srixon-small: Z Star

Other:     :Arccos: 360 (Caddie)

Link to post

The profile photos are limited to 250 pixels. Don’t know why that’s the number but it was set up by default and seems to work well. Just drop the picture you want into MS Paint then resize to that and it should work. 
 

As to the % complete, I’m stumped. It looks like you’ve filled out everything of consequence. 

  • Like 1

In my ATumSBM.jpg Pisa riding on a hXf3ptG.jpg 3.5+
.......tracked by :Arccos:


:ping-small: G410 Plus: Tensei Orange
:cobra-small: King F7 3/4 FW: Tensei Blue

:cobra-small: King F7 3/4 Hy: Fujikura Pro
:ping-small: i500 5-GW: Modus3 105
wxW5hk4.jpg Equalizer 56/60: KBS Tour 90
:MLA: Tour Classic Black w/ :P2-grips-logo:

Link to post

I have the same issue with the profile, except mine says 0% complete. When I click next it just takes me back to the main profile screen as if I had completed it.

  • Like 1
Link to post

Mine says 0% complete as well.   I would say it isn't important;  just fill out the profile information that you want and leave the rest blank.   the problem described seems to occur when you go through settings and use the complete my profile button.   I recommend just going to the profile/edit profile and filling out that information.  

Driver:  :ping-small: G400 Max 9* w/ KBS Tour Driven
Fairway: :titelist-small: TS3 15* set  to 16.5* w/Project X Hzardous Smoke
Hybrids:  :titelist-small: 816H1 19* set at 18* w/KBS Tour Graphite Hybrid Prototype
                :titelist-small: 915H  21*  w/KBS Tour Graphite Hybrid Prototype
               :titelist-small: 915H 24*  w/KBS Tour Graphite Hybrid Prototype
Irons:      :honma:TR20V 6-11 w/Vizard TR20-85 Graphite
Wedge:  :cleveland-small: 588 54-14, 58-12
Putter:  :odyssey-small: Ten S      Backups:  :bobby-grace-1: 6330,   :EVNROLL: ER2.2,  

 

Member:  MGS Hitsquad since 2017697979773_DSCN2368(Custom).JPG.a1a25f5e430d9eebae93c5d652cbd4b9.JPG

 

Link to post

One of the reasons it concerns me is because to be considered for testing products you have to have a completed profile. Thanks all for your insight. 

  • Like 1

:callaway-small: Epic Flash Sub Zero 9degree. Hosel set to -1degree/Nuetral. Aftermarket 10gram front weight and 6.5 gram sliding weight set to fade. Mitsubishi  Tensei AV Blue Stiff 67 “Tipped” half inch

Diablo 5 Wood Nuetral Stock shaft

:taylormade-small: M3 3 Hybrid Mitsubishi Tensei Blue Weight set to fade

:mizuno-small: JPX 850 Forged 4-GW KBS C Taper Stiff 1/2 inch longer 

:callaway-small: Mac Daddy 4 54, 58

:odyssey-small: Works Tank Cruiser 7              40 Grams in head and counterbalanced 30 grams inside Super Stroke Fatso Grip

:srixon-small: Z-Star

Link to post
1 hour ago, T2Grn said:

One of the reasons it concerns me is because to be considered for testing products you have to have a completed profile. Thanks all for your insight. 

I think it is just a glitch with the forum. If @cnosil has a 0% complete profile then you don't have anything to worry about because it looks like he was a tester for something back in '18.

  • Like 1
Link to post
9 hours ago, T2Grn said:

One of the reasons it concerns me is because to be considered for testing products you have to have a completed profile. Thanks all for your insight. 

Profile pic is all you need. We can't see your personal profile % complete. Did the resizing help?

In my ATumSBM.jpg Pisa riding on a hXf3ptG.jpg 3.5+
.......tracked by :Arccos:


:ping-small: G410 Plus: Tensei Orange
:cobra-small: King F7 3/4 FW: Tensei Blue

:cobra-small: King F7 3/4 Hy: Fujikura Pro
:ping-small: i500 5-GW: Modus3 105
wxW5hk4.jpg Equalizer 56/60: KBS Tour 90
:MLA: Tour Classic Black w/ :P2-grips-logo:

Link to post

Haven’t tried yet but will. Thank you. 

  • Like 1

:callaway-small: Epic Flash Sub Zero 9degree. Hosel set to -1degree/Nuetral. Aftermarket 10gram front weight and 6.5 gram sliding weight set to fade. Mitsubishi  Tensei AV Blue Stiff 67 “Tipped” half inch

Diablo 5 Wood Nuetral Stock shaft

:taylormade-small: M3 3 Hybrid Mitsubishi Tensei Blue Weight set to fade

:mizuno-small: JPX 850 Forged 4-GW KBS C Taper Stiff 1/2 inch longer 

:callaway-small: Mac Daddy 4 54, 58

:odyssey-small: Works Tank Cruiser 7              40 Grams in head and counterbalanced 30 grams inside Super Stroke Fatso Grip

:srixon-small: Z-Star

Link to post
18 hours ago, Apolloshowl said:

Try saving the photo as a compressed size. We have to do this in reviews because the true photo size is too big and would take forever to load. A simple app like Pixlr is the one I have used... Save the picture and it gives a option for pixel sizes. 

Pretty sure I had to do that with my profile pictire too.

Hope this helps...

As for the 4% I have no idea. Yours looks pretty complete and done up! 

 

:callaway-small: Epic Flash Sub Zero 9degree. Hosel set to -1degree/Nuetral. Aftermarket 10gram front weight and 6.5 gram sliding weight set to fade. Mitsubishi  Tensei AV Blue Stiff 67 “Tipped” half inch

Diablo 5 Wood Nuetral Stock shaft

:taylormade-small: M3 3 Hybrid Mitsubishi Tensei Blue Weight set to fade

:mizuno-small: JPX 850 Forged 4-GW KBS C Taper Stiff 1/2 inch longer 

:callaway-small: Mac Daddy 4 54, 58

:odyssey-small: Works Tank Cruiser 7              40 Grams in head and counterbalanced 30 grams inside Super Stroke Fatso Grip

:srixon-small: Z-Star

Link to post

That helped. Thank you did it with Pixlr. You guys are awesome for helping me out. And I think I might be able to get my introduction on the southwest forum.  
 

  • Like 1

:callaway-small: Epic Flash Sub Zero 9degree. Hosel set to -1degree/Nuetral. Aftermarket 10gram front weight and 6.5 gram sliding weight set to fade. Mitsubishi  Tensei AV Blue Stiff 67 “Tipped” half inch

Diablo 5 Wood Nuetral Stock shaft

:taylormade-small: M3 3 Hybrid Mitsubishi Tensei Blue Weight set to fade

:mizuno-small: JPX 850 Forged 4-GW KBS C Taper Stiff 1/2 inch longer 

:callaway-small: Mac Daddy 4 54, 58

:odyssey-small: Works Tank Cruiser 7              40 Grams in head and counterbalanced 30 grams inside Super Stroke Fatso Grip

:srixon-small: Z-Star

Link to post

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...