Evenflow Driver Shafts

[newballcoach 865]

I have the evenflow black in a G400 LST I bought over the winter. Had no idea what it would look like when I went to the course. The driver is a very hot and cold part of my game, and mostly, it was cold. Trouble with hooking the ball and poor contact with my old driver.

This combo has been a god send. I have been bashing the ball and the left miss is almost completely out of play. My carry distance has gone up and my dispersion is tightening up as well. That head is no joke, but this combo has been awesome for me.

[Jc2 8]

I went from a EF blue 6.0 to a black 6.5  in a Callaway Rogue.  Not fitted, just found a great deal on ta bare shaft and put the tip on as a cheap quick test.  Like newballcoach up there ^^^  the shaft has been a huge improvement for me.  The left miss is gone but still have workability and according to my Arccos data there has been no noticeable change in distance.  I never liked the feel of the HZRDUS shafts, and while the Blue felt great it was all over the place.  The black is a great compromise

[therod 69]

I've just about decided sometime this fall, I'd like to try a red Evenflow. We'll see how the new Grafalloy / Golfworks ProLaunch shaft works, but I'm always up for an experiment.

[RickyBobby_PR 4,780]

1 hour ago, therod said:

I've just about decided sometime this fall, I'd like to try a red Evenflow. We'll see how the new Grafalloy / Golfworks ProLaunch shaft works, but I'm always up for an experiment.

By red evenflow are you referring to the evenflow riptide?

[therod 69]

No, they make a red version that's high launch. It might be a made-for version that TaylorMades uses, not sure exactly. But I'm probably going to try a high launching shaft in my recently acquired F9.

[RickyBobby_PR 4,780]

6 hours ago, therod said:

No, they make a red version that's high launch. It might be a made-for version that TaylorMades uses, not sure exactly. But I'm probably going to try a high launching shaft in my recently acquired F9.

PX has no evenflow red and have no made for shafts for any manufacturer. Could it be the ventus red you are referring to?

[B.Boston 8,459]

PX has no evenflow red and have no made for shafts for any manufacturer. Could it be the ventus red you are referring to?

I believe [mention]therod [/mention] is referring to the “max carry” model. It was on the M6 last year I believe.

[dlow206 5,069]

6 minutes ago, B.Boston said:

I believe [mention]therod [/mention] is referring to the “max carry” model. It was on the M6 last year I believe.

Yep, this exists. Its a pretty good shaft, I owned one recently but sold it.

[RickyBobby_PR 4,780]

21 minutes ago, B.Boston said:

I believe [mention]therod [/mention] is referring to the “max carry” model. It was on the M6 last year I believe.

 

14 minutes ago, dlow206 said:

Yep, this exists. Its a pretty good shaft, I owned one recently but sold it.

I remember that shaft and after spending time on Project X website researching what shaft I wanted in my sim driver I didn’t recall seeing it there. I just went to their site and its non longer Project X website and it’s not an offering on TMs site either. Iirc that shaft came out in 2017 or 2018 and don’t recall it being a widely sight after option.
 

 

[B.Boston 8,459]

I remember that shaft and after spending time on Project X website researching what shaft I wanted in my sim driver I didn’t recall seeing it there. I just went to their site and its non longer Project X website and it’s not an offering on TMs site either. Iirc that shaft came out in 2017 or 2018 and don’t recall it being a widely sight after option.
 
 

Yeah I went right to the PX site too and was confused. I was like I know I’ve held it in my hands... I know it exists! Haha

Must not have been very popular outside of being an option for TM. I don’t recall seeing it in any other OEM lineup.


Sent from my iPad using Tapatalk

[RickyBobby_PR 4,780]

5 minutes ago, B.Boston said:

Yeah I went right to the PX site too and was confused. I was like I know I’ve held it in my hands... I know it exists! Haha

Must not have been very popular outside of being an option for TM. I don’t recall seeing it in any other OEM lineup.


Sent from my iPad using Tapatalk

Yeah it’s one that I haven’t seen any real reviews or feedback on since release. Iirc it was available in Callaway and maybe Cobra when it was released

[therod 69]

Yes it does seem strange. I just think a higher launching shaft would be good for me, and I like the Evenflow idea / design concept, and they're available on eBay.

[RickyBobby_PR 4,780]

54 minutes ago, therod said:

Yes it does seem strange. I just think a higher launching shaft would be good for me, and I like the Evenflow idea / design concept, and they're available on eBay.

Evenflow is a great option and the max carry shaft fits the high launch concept you are looking for. 

[tehuti 501]

I have the Evenflow Blue 5.0 55g paired with a PXG 0811X Gen 1 head.

 

 

 

 

 

Edited July 20, 2020 by tehuti

[beads81 7]

I had the Even Flow White 6.5 75 in my Titleist TS3 driver, I recently upgraded to a Callaway Mavrik driver with the Aldila Rogue white shaft.

I would like to get an even flow white like i had in my Titleist for the Callaway, just loved the way the shaft felt and performed.

[jayjay0808 1,112]

I have tried the EF, and for my swing it just didn't compare to the standard Smoke Green/Black/Yellow. I tend to have a pretty violent tempo but even the White and Black EF didn't provide me with my optimized numbers

[Acass916 0]

On 7/20/2020 at 2:00 PM, beads81 said:

I had the Even Flow White 6.5 75 in my Titleist TS3 driver, I recently upgraded to a Callaway Mavrik driver with the Aldila Rogue white shaft.

I would like to get an even flow white like i had in my Titleist for the Callaway, just loved the way the shaft felt and performed.

Dude I have the Mavrik with aldila rogue white shaft as well. Love it, allows me to move the ball in both directions 

[LukieAtTheLinks 0]

I have a green 65g shaft in my Callaway Epic 3-wood, it felt like a cheat code going from 710 3-wood to this from the head to the shaft. 

 

 

[Sluggo42 6,032]

Ive got the 6.0 50g Riptide in my new MavriK  I like it a lot