Jump to content

Show us your Maltby!!!


azstu324

Recommended Posts

Under the hood: 

Driver KE4 Tour TC with Blue Tensi (thanks to Popeye)

4 Wood - KE4 Tour TC - MPF Maltby Pro Shaft 

22 Hybrid - KE4 Tour TC Hybrid

5-PW TS2 KBS Tour S+ shafts

Gap - TS1 KBS Tour S+ shaft

54 and 58 TSW Wedges Tour S+ shafts

9E767E0A-703A-41C9-AD8D-8E1B2E0DDD36.jpeg

  • Like 3
Link to comment
Share on other sites

Under the hood: 
Driver KE4 Tour TC with Blue Tensi (thanks to Popeye)
4 Wood - KE4 Tour TC - MPF Maltby Pro Shaft 
22 Hybrid - KE4 Tour TC Hybrid
5-PW TS2 KBS Tour S+ shafts
Gap - TS1 KBS Tour S+ shaft
54 and 58 TSW Wedges Tour S+ shafts
9E767E0A-703A-41C9-AD8D-8E1B2E0DDD36.jpeg.85ba4a7cef5fd9a95598707c8e417f53.jpeg
Nice bag. How is that shaft working out for you?

Sent from my SM-G981U using Tapatalk

  • Like 1
Link to comment
Share on other sites

Here is current bag.
Ke4 TC- Xcaliber T6 ☆ S
TM SIM 3w Ti- Xcaliber Rapid Taper Fw
FDI 2 HY- Xcal Rapid Taper 75 g
PTM BLACKS 4-Gw- Xcal Pro X 85g
TSW 52-56- Xcal Spin Wedge 100g shaft
Ball is the amazing Bridgestone Tour B X.
Easily the best bag I've had in such a long time. 20200727_233141.jpg20200727_233119.jpg

Sent from my SM-G981U using Tapatalk

  • Like 6
Link to comment
Share on other sites

OK so I'm going to ask for a suggestion here.. I'm thinking about either

A. Building a TSW 50* to accompany my 56*. My current Gap is a W/S 51* set Gap which works just great but for some reason is about 1" shorter than I think it needs to be. I'm just so damn enamored with the TSW wedge that I would rather just build another one than have the W/S extend 1". 

OR

B. Building a TS-1 3 iron to cover my 220-230 yd gap AND to start using exclusively in place of driver at my exec. I've got a KBS Tour 90 3i shaft that would be a killer match up with this head. My current setup is only utilizing 12 clubs so I've got room to add another. 

$ permitting, I would easily just do both, but I'm faced with an either/or situation right now. The way I see it, is that I would use both equally at my course as there are 8 par 4's and roughly about 8-9 holes with either a tee or approach 130 yds or less that the 50* would come in handy. 

To add another twist, I'm hoping to be able to have a full set of TS1-s built by year's end AND I will at some point add the 50* TSW. So either way, I will eventually have both clubs in the bag.. it's just a matter of which one do I want right now? 😛

 

Cheers!

 

 

  • Like 2

:taylormade-small:  SIM Max 7°/ Fujikura MotoreX F1 6X
:cobra-small:  F6 3 Wood 14* / Mitsubishi Diamana Kai'li x5ct XS  
:callaway-small: Epic Flash Hybrid 18* / Mitsubishi Tensei Silver 70g 

post-76102-0-38507100-1525284411_thumb.jpg  TS-1 3 - P / TT DG 105 (S+) 
post-76102-0-38507100-1525284411_thumb.jpg  TSW Wedges - 50/6 + 56/12
:cleveland-small: HB Soft Premier #4 / Golf Pride Pro Only Red Star 
:taylormade-small: TP5x

(MGS Test Member for the :edel-golf-1:EAS Putter)

 

 

 

 

Link to comment
Share on other sites

47 minutes ago, azstu324 said:

OK so I'm going to ask for a suggestion here.. I'm thinking about either

A. Building a TSW 50* to accompany my 56*. My current Gap is a W/S 51* set Gap which works just great but for some reason is about 1" shorter than I think it needs to be. I'm just so damn enamored with the TSW wedge that I would rather just build another one than have the W/S extend 1". 

OR

B. Building a TS-1 3 iron to cover my 220-230 yd gap AND to start using exclusively in place of driver at my exec. I've got a KBS Tour 90 3i shaft that would be a killer match up with this head. My current setup is only utilizing 12 clubs so I've got room to add another. 

$ permitting, I would easily just do both, but I'm faced with an either/or situation right now. The way I see it, is that I would use both equally at my course as there are 8 par 4's and roughly about 8-9 holes with either a tee or approach 130 yds or less that the 50* would come in handy. 

To add another twist, I'm hoping to be able to have a full set of TS1-s built by year's end AND I will at some point add the 50* TSW. So either way, I will eventually have both clubs in the bag.. it's just a matter of which one do I want right now? 😛

 

Cheers!

 

 

I just purchased a driving 3i from Maltby with a hybrid shaft in it I will let you know what it is like when it gets here.

  • Like 3
Link to comment
Share on other sites

1 minute ago, tommc23 said:

I just purchased a driving 3i from Maltby with a hybrid shaft in it I will let you know what it is like when it gets here.

 

Always interested in hearing more about the Driving Irons! 

FYI, the Maltby shafts are wildly underrated! I had a 4 hybrid that I played for a little while and ended up giving to my dad but the shaft in it was absolutely beautiful. Both in terms of looks and performance. If Maltby made a low spin X flex driver shaft, I'd be all over it!. 

 

  • Like 1

:taylormade-small:  SIM Max 7°/ Fujikura MotoreX F1 6X
:cobra-small:  F6 3 Wood 14* / Mitsubishi Diamana Kai'li x5ct XS  
:callaway-small: Epic Flash Hybrid 18* / Mitsubishi Tensei Silver 70g 

post-76102-0-38507100-1525284411_thumb.jpg  TS-1 3 - P / TT DG 105 (S+) 
post-76102-0-38507100-1525284411_thumb.jpg  TSW Wedges - 50/6 + 56/12
:cleveland-small: HB Soft Premier #4 / Golf Pride Pro Only Red Star 
:taylormade-small: TP5x

(MGS Test Member for the :edel-golf-1:EAS Putter)

 

 

 

 

Link to comment
Share on other sites

5 hours ago, azstu324 said:

 

Always interested in hearing more about the Driving Irons! 

FYI, the Maltby shafts are wildly underrated! I had a 4 hybrid that I played for a little while and ended up giving to my dad but the shaft in it was absolutely beautiful. Both in terms of looks and performance. If Maltby made a low spin X flex driver shaft, I'd be all over it!. 

 

I got it with the Adilla NV 2KXV Blue. Going to see how I do with a mid launch mid spin shaft I normally have a very high laugh and high spin swing. Going to see how I do with it.

  • Like 1
Link to comment
Share on other sites

On 7/27/2020 at 9:36 PM, Popeye64 said:

Nice bag. How is that shaft working out for you?

Sent from my SM-G981U using Tapatalk
 

Really liking it. A little soft for my liking but the distance I am getting is pretty stout. I hit one today that I won’t say how far because I don’t think most would believe me. I’ll just say it went a very very long ways. Love the ball flight also. Thanks again!

Edited by Triplebogey
  • Like 2
Link to comment
Share on other sites

I did it, I pulled the trigger on a TS-1 3 iron head. Also ordered the ferrules that go with it. 

@Popeye64 if I might pick your brain, I've got a KBS Tour 90 shaft. It's .370 Parallel tip. Have you had any experience with the "universal" hosel? I've just read that you load up the inside with epoxy to fill the void at the bottom. 

Any other words of wisdom? 😄 

  • Like 1

:taylormade-small:  SIM Max 7°/ Fujikura MotoreX F1 6X
:cobra-small:  F6 3 Wood 14* / Mitsubishi Diamana Kai'li x5ct XS  
:callaway-small: Epic Flash Hybrid 18* / Mitsubishi Tensei Silver 70g 

post-76102-0-38507100-1525284411_thumb.jpg  TS-1 3 - P / TT DG 105 (S+) 
post-76102-0-38507100-1525284411_thumb.jpg  TSW Wedges - 50/6 + 56/12
:cleveland-small: HB Soft Premier #4 / Golf Pride Pro Only Red Star 
:taylormade-small: TP5x

(MGS Test Member for the :edel-golf-1:EAS Putter)

 

 

 

 

Link to comment
Share on other sites

12 minutes ago, azstu324 said:

I did it, I pulled the trigger on a TS-1 3 iron head. Also ordered the ferrules that go with it. 

@Popeye64 if I might pick your brain, I've got a KBS Tour 90 shaft. It's .370 Parallel tip. Have you had any experience with the "universal" hosel? I've just read that you load up the inside with epoxy to fill the void at the bottom. 

Any other words of wisdom? 😄 

https://www.golfworks.com/maltby-ke4-fdi-hybrids/p/kma0305/

 

I'm waiting on this baby I ordered it and I'm excited to get it in. I also ordered a 58° to match my 54° I'm excited. 

  • Like 2
Link to comment
Share on other sites

I did it, I pulled the trigger on a TS-1 3 iron head. Also ordered the ferrules that go with it. 
[mention=75887]Popeye64[/mention] if I might pick your brain, I've got a KBS Tour 90 shaft. It's .370 Parallel tip. Have you had any experience with the "universal" hosel? I've just read that you load up the inside with epoxy to fill the void at the bottom. 
Any other words of wisdom? [emoji1] 
Don't do anything out of the ordinary. The pocket is really small so there really is nothing to fill.

Sent from my SM-G981U using Tapatalk

  • Like 2
Link to comment
Share on other sites

Here is my bag:

Driver - Maltby STW 10.5 (hand picked at 10°), Xcaliber Avalon 6S, 45", D0

3 Wood - Maltby KE4 14 (hand picked at 13.5°), Xcaliber T6* S flex, tipped 1/4" more than standard. D2

19° Hybrid - Snake Eyes Quick Strike II, Xcaliber T6+ (older model), TS untipped to play softer (had this as my driver shaft before, it is a LOT of shaft). D3

22° Hybrid - Maltby KE4 Tour, Kuro Kage Black X hybrid shaft, standard trim. D3

Irons - Maltby TS1 5-pw, DG Sensicore X100, 2° flat, D2, 4 degree gapping from 6 through pw (pw at 44°)

Wedges - Maltby TSW 50, 54, 58. 2° flat. D4 on 50 and 54, D2 on 58. 35.5" on 50, 35.25" on 54, 35" on 58. DG X100, soft stepped one club.

Putter - Ping TP 5 Anser 33", standard loft and lie.

Ball - Bridgestone Tour B X

Grips - Golf Pride Z grip cord, standard size.

 

1596381211739_20200802_091427.jpg

1596381214125_20200802_091419.jpg

20200801_135730.jpg

20200802_091412.jpg

  • Like 5

Taylormade SIM 9° set at 7.5°, Xcaliber Avalon 6S tour stiff, tipped 1/2", 11g backweight, 10g adjustable weight, D5, 45 7/8", Maltby KE4 Tour TC 3 wood, 14°, Xcaliber Avalon 6S tour stiff, tipped 1/2" 44", D4, 6g weight installed, Maltby KE4 FDI 19° (bent to 18°) and 21° (bent to 22°), Xcaliber Avalon i9 shafts tipped 1/2", D2,Snake Eyes quick strike tour 18° hybrid, Xcaliber T6* TS untipped (soft stepped)

Maltby KE4 tour hybrid, 22°, kuro kage black shaft X 

Maltby TS-1 irons, DG X100 Sensicore, D4, 2° flat, 5-PW

Maltby TSW wedges,  DG X100 Sensicore,  50°, 54°, 58°, 2° flat

Ping TR series Anser 5, 33", 2° flat, 1.5° strong

Tp5x pix

Link to comment
Share on other sites

Here is my bag:
Driver - Maltby STW 10.5 (hand picked at 10°), Xcaliber Avalon 6S, 45", D0
3 Wood - Maltby KE4 14 (hand picked at 13.5°), Xcaliber T6* S flex, tipped 1/4" more than standard. D2
19° Hybrid - Snake Eyes Quick Strike II, Xcaliber T6+ (older model), TS untipped to play softer (had this as my driver shaft before, it is a LOT of shaft). D3
22° Hybrid - Maltby KE4 Tour, Kuro Kage Black X hybrid shaft, standard trim. D3
Irons - Maltby TS1 5-pw, DG Sensicore X100, 2° flat, D2, 4 degree gapping from 6 through pw (pw at 44°)
Wedges - Maltby TSW 50, 54, 58. 2° flat. D4 on 50 and 54, D2 on 58. 35.5" on 50, 35.25" on 54, 35" on 58. DG X100, soft stepped one club.
Putter - Ping TP 5 Anser 33", standard loft and lie.
Ball - Bridgestone Tour B X
Grips - Golf Pride Z grip cord, standard size.
 
1596381211739_20200802_091427.jpg.5e432eb008e4395b5cb441953c3256ce.jpg
1596381214125_20200802_091419.jpg.7bb667cb3b5f4fdb8329604075a27d28.jpg
20200801_135730.jpg.791a59c7f79897aff33acf51a79af7d4.jpg
20200802_091412.jpg.94c9bfecbdaf0776ea7ff7035af2f8db.jpg
Now you're a guy who's brain o need to pick! I'm a few months from pulling the trigger on some TS-1's.

How have they been treating you with the X100's? I'm on the fence between those and S300's.

I'll be going the full set 3-PW. I'm currently playing DG (not dynalite) XP S300's in my Wilson Staff Tour FG's. The shaft are a little different in that they're a higher flight but weight is similar and I definitely feel like I could go a tad stiffer for some more control.

Of course I'll be heading over to PGATSS to compare the 2 before pulling the trigger.




the more I practice, the luckier I seem to get..

:taylormade-small:  SIM Max 7°/ Fujikura MotoreX F1 6X
:cobra-small:  F6 3 Wood 14* / Mitsubishi Diamana Kai'li x5ct XS  
:callaway-small: Epic Flash Hybrid 18* / Mitsubishi Tensei Silver 70g 

post-76102-0-38507100-1525284411_thumb.jpg  TS-1 3 - P / TT DG 105 (S+) 
post-76102-0-38507100-1525284411_thumb.jpg  TSW Wedges - 50/6 + 56/12
:cleveland-small: HB Soft Premier #4 / Golf Pride Pro Only Red Star 
:taylormade-small: TP5x

(MGS Test Member for the :edel-golf-1:EAS Putter)

 

 

 

 

Link to comment
Share on other sites

I LOVE the TS1's. Only club I have ever hit and the first contact (5 iron and not loose) made me say "wow, I need these!"

I am building some for a friend who hit mine and loved them. To get the same feel as my sensicore shafts, we are doing x100 soft stepped one club and putting in the vibration dampening foam inserts you can buy at Golfworks. Not sure i could tell the difference between them.

I would build one with a soft stepped x100 and give it a go. Stiffer, but playable.

Taylormade SIM 9° set at 7.5°, Xcaliber Avalon 6S tour stiff, tipped 1/2", 11g backweight, 10g adjustable weight, D5, 45 7/8", Maltby KE4 Tour TC 3 wood, 14°, Xcaliber Avalon 6S tour stiff, tipped 1/2" 44", D4, 6g weight installed, Maltby KE4 FDI 19° (bent to 18°) and 21° (bent to 22°), Xcaliber Avalon i9 shafts tipped 1/2", D2,Snake Eyes quick strike tour 18° hybrid, Xcaliber T6* TS untipped (soft stepped)

Maltby KE4 tour hybrid, 22°, kuro kage black shaft X 

Maltby TS-1 irons, DG X100 Sensicore, D4, 2° flat, 5-PW

Maltby TSW wedges,  DG X100 Sensicore,  50°, 54°, 58°, 2° flat

Ping TR series Anser 5, 33", 2° flat, 1.5° strong

Tp5x pix

Link to comment
Share on other sites

6 hours ago, jtgavigan said:

Here is my bag:

Driver - Maltby STW 10.5 (hand picked at 10°), Xcaliber Avalon 6S, 45", D0

3 Wood - Maltby KE4 14 (hand picked at 13.5°), Xcaliber T6* S flex, tipped 1/4" more than standard. D2

19° Hybrid - Snake Eyes Quick Strike II, Xcaliber T6+ (older model), TS untipped to play softer (had this as my driver shaft before, it is a LOT of shaft). D3

22° Hybrid - Maltby KE4 Tour, Kuro Kage Black X hybrid shaft, standard trim. D3

Irons - Maltby TS1 5-pw, DG Sensicore X100, 2° flat, D2, 4 degree gapping from 6 through pw (pw at 44°)

Wedges - Maltby TSW 50, 54, 58. 2° flat. D4 on 50 and 54, D2 on 58. 35.5" on 50, 35.25" on 54, 35" on 58. DG X100, soft stepped one club.

Putter - Ping TP 5 Anser 33", standard loft and lie.

Ball - Bridgestone Tour B X

Grips - Golf Pride Z grip cord, standard size.

 

1596381211739_20200802_091427.jpg

1596381214125_20200802_091419.jpg

20200801_135730.jpg

20200802_091412.jpg

That 3w head looks gigantic is it big or just the picture?

Link to comment
Share on other sites

Here is my bag:
Driver - Maltby STW 10.5 (hand picked at 10°), Xcaliber Avalon 6S, 45", D0
3 Wood - Maltby KE4 14 (hand picked at 13.5°), Xcaliber T6* S flex, tipped 1/4" more than standard. D2
19° Hybrid - Snake Eyes Quick Strike II, Xcaliber T6+ (older model), TS untipped to play softer (had this as my driver shaft before, it is a LOT of shaft). D3
22° Hybrid - Maltby KE4 Tour, Kuro Kage Black X hybrid shaft, standard trim. D3
Irons - Maltby TS1 5-pw, DG Sensicore X100, 2° flat, D2, 4 degree gapping from 6 through pw (pw at 44°)
Wedges - Maltby TSW 50, 54, 58. 2° flat. D4 on 50 and 54, D2 on 58. 35.5" on 50, 35.25" on 54, 35" on 58. DG X100, soft stepped one club.
Putter - Ping TP 5 Anser 33", standard loft and lie.
Ball - Bridgestone Tour B X
Grips - Golf Pride Z grip cord, standard size.
 
1596381211739_20200802_091427.jpg.5e432eb008e4395b5cb441953c3256ce.jpg
1596381214125_20200802_091419.jpg.7bb667cb3b5f4fdb8329604075a27d28.jpg
20200801_135730.jpg.791a59c7f79897aff33acf51a79af7d4.jpg
20200802_091412.jpg.94c9bfecbdaf0776ea7ff7035af2f8db.jpg
Great looking bag. That Xcaliber Avalon 6S is such a smooth feeling shaft. I have built 4 of them for people and they are just smitten with how they feel and play.

Sent from my SM-G981U using Tapatalk

Link to comment
Share on other sites

Just the picture..

Taylormade SIM 9° set at 7.5°, Xcaliber Avalon 6S tour stiff, tipped 1/2", 11g backweight, 10g adjustable weight, D5, 45 7/8", Maltby KE4 Tour TC 3 wood, 14°, Xcaliber Avalon 6S tour stiff, tipped 1/2" 44", D4, 6g weight installed, Maltby KE4 FDI 19° (bent to 18°) and 21° (bent to 22°), Xcaliber Avalon i9 shafts tipped 1/2", D2,Snake Eyes quick strike tour 18° hybrid, Xcaliber T6* TS untipped (soft stepped)

Maltby KE4 tour hybrid, 22°, kuro kage black shaft X 

Maltby TS-1 irons, DG X100 Sensicore, D4, 2° flat, 5-PW

Maltby TSW wedges,  DG X100 Sensicore,  50°, 54°, 58°, 2° flat

Ping TR series Anser 5, 33", 2° flat, 1.5° strong

Tp5x pix

Link to comment
Share on other sites

Just now, jtgavigan said:

Just the picture..

 

4 hours ago, tommc23 said:

That 3w head looks gigantic is it big or just the picture?

Just the picture. 

Taylormade SIM 9° set at 7.5°, Xcaliber Avalon 6S tour stiff, tipped 1/2", 11g backweight, 10g adjustable weight, D5, 45 7/8", Maltby KE4 Tour TC 3 wood, 14°, Xcaliber Avalon 6S tour stiff, tipped 1/2" 44", D4, 6g weight installed, Maltby KE4 FDI 19° (bent to 18°) and 21° (bent to 22°), Xcaliber Avalon i9 shafts tipped 1/2", D2,Snake Eyes quick strike tour 18° hybrid, Xcaliber T6* TS untipped (soft stepped)

Maltby KE4 tour hybrid, 22°, kuro kage black shaft X 

Maltby TS-1 irons, DG X100 Sensicore, D4, 2° flat, 5-PW

Maltby TSW wedges,  DG X100 Sensicore,  50°, 54°, 58°, 2° flat

Ping TR series Anser 5, 33", 2° flat, 1.5° strong

Tp5x pix

Link to comment
Share on other sites

I have played extra stiff shafts for years and often ones that feel "boardy" to others. These (T6 and Avalon 6) are plenty stiff and I never felt that I was going to lose control with a stiff flex with either. Neither one feels boardy either. Robin nailed it with these. 

  • Like 1

Taylormade SIM 9° set at 7.5°, Xcaliber Avalon 6S tour stiff, tipped 1/2", 11g backweight, 10g adjustable weight, D5, 45 7/8", Maltby KE4 Tour TC 3 wood, 14°, Xcaliber Avalon 6S tour stiff, tipped 1/2" 44", D4, 6g weight installed, Maltby KE4 FDI 19° (bent to 18°) and 21° (bent to 22°), Xcaliber Avalon i9 shafts tipped 1/2", D2,Snake Eyes quick strike tour 18° hybrid, Xcaliber T6* TS untipped (soft stepped)

Maltby KE4 tour hybrid, 22°, kuro kage black shaft X 

Maltby TS-1 irons, DG X100 Sensicore, D4, 2° flat, 5-PW

Maltby TSW wedges,  DG X100 Sensicore,  50°, 54°, 58°, 2° flat

Ping TR series Anser 5, 33", 2° flat, 1.5° strong

Tp5x pix

Link to comment
Share on other sites

When the time comes to replace my current irons, I will seriously consider Maltby. I typically play a few clubs from the smaller manufacturer. Just last year I retired my MacGregor wedges and a year or two prior, my MacGregor driver. 

:cobra-small: Fly Z+ Aldila DVS

Golfsmith Jet Stream 3W UST V2

:titelist-small: 915 H3 Diamana

:titelist-small: 915 H4 Diamana

:benhogan-small: Apex Edge Pro Apex 4

:titelist-small: Vokey SM6 50F/54S/58S

:titelist-small: Studio Design 2.5/:cleveland-small: Huntington Beach 11S

:titelist-small: Pro V1x

:skycaddie:

Bag Boy Chiller

Bag Boy Quad XL

 

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...