Nothing feels like a Mizuno

[Golfspy_CG2 31,739]

32 minutes ago, StrawberryShortCake said:

I'm looking at getting the JPX 919 Forged this fall (hoping for a sale) when the new mizuno line comes out. Anyone on the forum selling a 4-pw set in decent condition please message me.

The price on the 919 has already been dropped in anticipation of the new JPX lineup later this summer.  

[StrawberryShortCake 627]

36 minutes ago, Golfspy_CG2 said:

The price on the 919 has already been dropped in anticipation of the new JPX lineup later this summer.  

New or used? What retailers have dropped the price? I've been looking online and the prices mediocre.

[mchiller 43]

1 hour ago, StrawberryShortCake said:

New or used? What retailers have dropped the price? I've been looking online and the prices mediocre.

I think all places are now $1,000 ($125/club) for the set. Used to be $1,400 ($175/club). 

[StrawberryShortCake 627]

4 hours ago, mchiller said:

I think all places are now $1,000 ($125/club) for the set. Used to be $1,400 ($175/club). 

Canada is prob behind, like always. Were still sitting at 1400-1700 dollars a set. Fingers crossed i scoop a great deal before Xmas. 

[tony@CIC 21,999]

Last year I was fit for D-7's but didn't get them because my wife's new clubs were a higher priority. Thinking about getting them this year and asked my fitter. He suggested I try the 919 Hot Metals as a comparison to the D-7's. He mentioned they were only $13./club more than the D-7's. I'm tempted to go back for just an iron fitting. I love the look of the Mizunos - almost too pretty to hit. 

[Kanoito 2,948]

20 hours ago, ballplayer002003 said:

really?!  How interesting!  You went to get fit for Mizuno's and they didn't use the MIZUNO Optimizer.  Interesting.  What shafts did you decide to go with?

For some reason, when I did the Mizuno fitting, the guy also didn't bring it out. He said his instinct is more accurate than the optimizer 

I trusted him and don't regret my purchase at all.

[Golfspy_CG2 31,739]

1 hour ago, tony@CIC said:

Last year I was fit for D-7's but didn't get them because my wife's new clubs were a higher priority. Thinking about getting them this year and asked my fitter. He suggested I try the 919 Hot Metals as a comparison to the D-7's. He mentioned they were only $13./club more than the D-7's. I'm tempted to go back for just an iron fitting. I love the look of the Mizunos - almost too pretty to hit. 

You should really look at the D7 Forged as well if you haven't.  John wrote a very good-as usual--first look piece on them earlier this spring, that is on the blog. 

A very good value for a nice looking club, but nothing wrong with the Hot Metals either!

[Duffman57 2]

15 hours ago, Golfspy_CG2 said:

The price on the 919 has already been dropped in anticipation of the new JPX lineup later this summer.  

I’m hoping to get a real steal on EBay at some point for the forged. Have old x-14s that im probably too good for now, and just got mp-32s that I haven’t hit yet, that I got super cheap from a family member, but I really don’t think I’m good enough for those yet. 
 

I’m really annoyed though, I missed out on a split set of forged(4-6)/tour(7-9) 900s that went for $165 on eBay. Hope I can find something in the 150-250 range in the 900 or 919s when the new JPXs come out. 

Edited June 11, 2020 by Duffman57

[Golfspy_CG2 31,739]

900 deals should be pretty easy to find.   I sold a my 919 Forged right before the COVID for $650, but that was before any price reduction and they were in mint shape, probably less than 10 rounds on them. 

[StrawberryShortCake 627]

2 minutes ago, Golfspy_CG2 said:

900 deals should be pretty easy to find.   I sold a my 919 Forged right before the COVID for $650, but that was before any price reduction and they were in mint shape, probably less than 10 rounds on them. 

Dang with I saw that post.

[Duffman57 2]

15 minutes ago, Golfspy_CG2 said:

900 deals should be pretty easy to find.   I sold a my 919 Forged right before the COVID for $650, but that was before any price reduction and they were in mint shape, probably less than 10 rounds on them. 

Yeah, They're going for right around 300-350 on ebay right now, hoping with the new release and if I monitor ebay enough, I'll be able to find a good deal.  I know the 32's are a pretty well known club, so maybe they'll be more forgiving than I expect I'm just getting to playing weekly after only playing a couple times a year for the last 5-10, so I'm no expect but my irons have been the best part of my game by far. 

[Golfspy_CG2 31,739]

7 minutes ago, Duffman57 said:

Yeah, They're going for right around 300-350 on ebay right now, hoping with the new release and if I monitor ebay enough, I'll be able to find a good deal.  I know the 32's are a pretty well known club, so maybe they'll be more forgiving than I expect I'm just getting to playing weekly after only playing a couple times a year for the last 5-10, so I'm no expect but my irons have been the best part of my game by far. 

Good luck with your search.  Sometimes the hunt is as fun as the actual pulling of the trigger on deals for clubs.  I know I've been known to go down several rabbit holes looking for a deal on a particular set.

As for the MP32, I can't speak to their forgiveness, but all I can tell you is @MDGolfHacker regrets the day he sold his several years ago, more than any other day that he can recall.  He's been searching for the perfect iron since then.   Perhaps he can give you some of his thoughts on the play ability of them. 

[Duffman57 2]

1 minute ago, Golfspy_CG2 said:

Good luck with your search.  Sometimes the hunt is as fun as the actual pulling of the trigger on deals for clubs.  I know I've been known to go down several rabbit holes looking for a deal on a particular set.

As for the MP32, I can't speak to their forgiveness, but all I can tell you is @MDGolfHacker regrets the day he sold his several years ago, more than any other day that he can recall.  He's been searching for the perfect iron since then.   Perhaps he can give you some of his thoughts on the play ability of them. 

Yep, It's almost sad how much I obsessed over it for the last week or two, still pissed I pulled the trigger on the MP-32's and missed out on the 900 tour/Forged deal. I think the Forged are going to be exactly what I wanted out of the clubs.

If nothing else I'll use the MP-32's to learn how to really strike irons.  I'm very much a feel player, and I remember hitting my dads old MP-60s and I absolutely LOVED the feeling of them (the club weight was perfect, I dislike lighter irons, and want something heavier at the end, which is part of the reason I want to upgrade).  So maybe the feel of the clubs will help me out on the ball striking front. We'll see when I actually get the clubs haha.

[McaseyM 1,725]

wish i had the game ..... and money.. to play these ..... #oneday

[ballplayer002003 1,433]

On 6/11/2020 at 9:02 AM, Kanoito said:

For some reason, when I did the Mizuno fitting, the guy also didn't bring it out. He said his instinct is more accurate than the optimizer 

I trusted him and don't regret my purchase at all.

I am sure you will LOVE the clubs for many years!  They are a GREAT stick!!!!!

[Gman24 70]

On 6/10/2020 at 12:55 PM, tchat07 said:

Actually I did not, was fitted at 3 different facilities and none brought out the shaft optimizer.

Any Mizuno fitter should have the optimizer.  I would question why they don't have it.

[Gman24 70]

Mizuno T20:  I am really enjoying my MP20s, so I met with my Mizuno fitter (Mulligans in Richmond VA) and we fit me for 3 T20s Satin finish.  Jay (the fitter) took ample time to let me hit multiple wedge configurations using a lie board and fitting tape while hitting outdoors.  We went with S Grind 50/07, M Grind 54/12 and C Grind 59/09 to create diversity in the grinds.  I have a shop, so I can tweak the 54's grind a little if needed, but we did our best to fit based on the prevalent conditions in my home area. I was carrying a 52/56/60 set gapping, so it will be interesting how these work.  I am hitting my MP20s with DG X100s, so we matched them up with DG S400 for shaft weight to help keep the swing weight reasonable (all my clubs are plus 3/4").  

I will post a "review" when I get them and put them in play.

 

[ZenGolfer 928]

I recently put my old Mizuno MX-11s back in the bag and Ive been really enjoying them.  They arent forged but even cast, hollow-bodied Mizunos still feel pretty good.

[Gman24 70]

Just put a set of 3 T20 Wedges into my bag with DG S400 shafts to complement my new MP20s.  So far, I am really liking the new wedges and irons.  The wedges feel really nice on "touch" shots around the green.

[Brookers 14]

Up until this year I played MP-5's (P-7) W/ JPX EZ 5 and 6 irons.  I noticed I wasn't getting the distance nor the shot shaping I wanted, just getting old :(...

I spent three and one half hours at the PGA store in Schaumburg, IL (prior to Covid) and went through all of the currently available irons, knowing sadly, I needed to go to cavity back set.  After I tried the Mizuno JPX 919 HM's (third set I had tried) I knew they were the clubs to beat!  Only the AP3's had anywhere near the feel of the Mizuno's and definitely not as good.  I was seriously impressed that a forgiving iron still gave me the feedback that I had hit the shot I wanted or slightly mis-hit it, absolutely awesome!

I loved the irons so much I went with Mizuno JPX 919 Forged for my wedges, great set.