Jump to content
TESTERS WANTED! ×

ShotScope and SuperStroke


3ironpunch

Recommended Posts

I'm considering switching putter grips to a superstroke and adding the weight  to the grip.  However, the normal method to attach a shotscope tag will not work since there is no threaded hole in the grip end. 

I am thinking about removing the threaded end of the tag and using a super glue or similar to affix the shotscope tag to the weight.  Has any else attempted this ?  

Thanks

RB 

Callaway Big Bertha Fusion Heavy 10.5 closed face setting

Callaway Razor Fit 3 wood

Nickent 3 Hybrid

XR-OS 4i - 9i factory steel stiff 2 up +1

Ben Hogan 44,48,52,56

Nickent PP-01

Maxfli Tour Center of Gravity model

Link to comment
Share on other sites

I've seen a lot of people cutting the thread off and using double-sided velcro tape on it... super glue is gonna work, too, but it might be more permanent.

Other people use the manual mode to register putts.

:cobra-small: SpeedZone 9* w/ Aldila Rogue Silver 60 S
:callaway-small: X2 Hot 3 Deep 14.5* w/ Aldila Tour Green 75 S
:taylormade-small: JetSpeed 5W 19* w/ Matrix Velox T 69 S OR :adams-small: Super LS 3H 19* w/ Kuro Kage Black 80 S
:mizuno-small: JPX919 Forged 4-PW w/ Modus3 105 S
:titelist-small: Vokey SM7 50/08F, 54/14F & 58/08M w/ Modus3 115 Wedge
:EVNROLL: ER1 34" w/ SuperStroke Fatso 2.0
MfleKCg.jpg Pro / 9dZCgaF.jpgH2NO Lite Cart Bag / :Clicgear: 3.0 / :918457628_PrecisionPro: NX7 Pro LRF

My reviews: MLA Putter // Titleist SM7 // PING i500 // PuttOUT

Link to comment
Share on other sites

When I used ShotScope, I cut most of the threads off (left just enough to get a little bite in the hole of the grip) and used Gorilla Glue. This is what I used:

29469-DEFAULT-l.jpg

Driver:  :callaway-small:Epic Speed 9* (set -1) MMT 70X
3W:bridgestone-small: Tour B JGR Recoil 760ES
3H, 4H: :bridgestone-small: Tour B JGR 19*, 23* Recoil 780ES
4-AW:bridgestone-small: Tour B JGR HF2 Modus3 Tour 105
SW: :cleveland-small: RTX Zipcore Black Satin 54*
LW:Sub70: TAIII Black 58*
Putter:ping-small: Scottsdale TR Senita
Bag: BigMax Dri Active Lite
Ball:taylormade-small: TP5x or :titleist-small: AVX (yellow)
Pushcart: BigMax iQ+

Testing Complete, Final Review PostedSub70 TAIII Forged Wedges

Link to comment
Share on other sites

Thanks.  I have used Gorilla Glue before  "Strong Stuff.."  and i will look more into the manual putt registration.  

Callaway Big Bertha Fusion Heavy 10.5 closed face setting

Callaway Razor Fit 3 wood

Nickent 3 Hybrid

XR-OS 4i - 9i factory steel stiff 2 up +1

Ben Hogan 44,48,52,56

Nickent PP-01

Maxfli Tour Center of Gravity model

Link to comment
Share on other sites

Don't know why i didn't think of this before.  I called superstroke.  They have an attachment but it is designed for Arcos only. Next step.... purchase and reengineer 🙂  Franken Putter !

Callaway Big Bertha Fusion Heavy 10.5 closed face setting

Callaway Razor Fit 3 wood

Nickent 3 Hybrid

XR-OS 4i - 9i factory steel stiff 2 up +1

Ben Hogan 44,48,52,56

Nickent PP-01

Maxfli Tour Center of Gravity model

Link to comment
Share on other sites

  • 2 weeks later...
On 6/12/2020 at 9:37 AM, 3ironpunch said:

Don't know why i didn't think of this before.  I called superstroke.  They have an attachment but it is designed for Arcos only. Next step.... purchase and reengineer 🙂  Franken Putter !

Have you tried this yet?  I'd be interested to see if this works...

Link to comment
Share on other sites

  • 4 weeks later...

I just drilled a hole in the top of the grip beside the metal plug (far enough away to not damage the plug/thread) and screwed in the tag. Works great.

One thing to be aware of if you are considering cutting off the screw and gluing the tag to your putter: The putter tag is unique. You can't substitute a different tag as your putter tag if you change putters.

Edited by Jim418

Driver:    Titliest TSi3 - Tensei white stiff
Wood:   PING  G425 LST 14.5* - Tensei orange stiff
Hybrid:   PING  G425 19* - Tensei orange stiff
Irons:    PING i525 - Project X I/O 5.5 - 4-W
Wedges:     Taylormade MG3 52* and HiToe 56* Project X I/O 6.0
Putter:  TM Spider X HYDROBLAST (33", 3* upright)

 

 

 

 

Link to comment
Share on other sites

I changed the watch over to "manual" mode to collect putts and no longer use a putter tag. Helps accuracy and eliminates errors when I am tapping down pitch marks on the green. 

:ping-small: G425 MAX Driver & 5W

:cobra-small: Baffler Rail-H 3H-4H

:Sub70: 699 Pro Utility V2 - 4i

:callaway-small: APEX CF19 6-AW

INDI Wedges 52, 56, 60 

 :edel-golf-1: EAS 2.0

Link to comment
Share on other sites

  • 4 weeks later...
Have you tried this yet?  I'd be interested to see if this works...

Sorry for the delay. Had some family health issues and not really thinking about golf. But. I did receive the SuperStroke attachment and the shot scope tags would need to be shaved down to fit. I have not tried to mod it yet. About 1/32 would need to come off the external diameter. Just haven’t had time and I don’t know the thickness of the casing on the tag. Another option would be a blast motion oversized putter grip adapter but
it is a bit oversized for the SuperStroke I have. Now that shotscope has made available extra putter tags Without the threaded shaft that is probably the way to go


Sent from my iPhone using MyGolfSpy

Callaway Big Bertha Fusion Heavy 10.5 closed face setting

Callaway Razor Fit 3 wood

Nickent 3 Hybrid

XR-OS 4i - 9i factory steel stiff 2 up +1

Ben Hogan 44,48,52,56

Nickent PP-01

Maxfli Tour Center of Gravity model

Link to comment
Share on other sites

8 hours ago, 3ironpunch said:


Sorry for the delay. Had some family health issues and not really thinking about golf. But. I did receive the SuperStroke attachment and the shot scope tags would need to be shaved down to fit. I have not tried to mod it yet. About 1/32 would need to come off the external diameter. Just haven’t had time and I don’t know the thickness of the casing on the tag. Another option would be a blast motion oversized putter grip adapter but
it is a bit oversized for the SuperStroke I have. Now that shotscope has made available extra putter tags Without the threaded shaft that is probably the way to go


Sent from my iPhone using MyGolfSpy

Or just drill a hole in the top of the grip beside the metal plug (far enough away to not damage the plug/thread) and screw in the tag. Works great.

Driver:    Titliest TSi3 - Tensei white stiff
Wood:   PING  G425 LST 14.5* - Tensei orange stiff
Hybrid:   PING  G425 19* - Tensei orange stiff
Irons:    PING i525 - Project X I/O 5.5 - 4-W
Wedges:     Taylormade MG3 52* and HiToe 56* Project X I/O 6.0
Putter:  TM Spider X HYDROBLAST (33", 3* upright)

 

 

 

 

Link to comment
Share on other sites

  • 7 months later...
On 6/12/2020 at 3:37 PM, 3ironpunch said:

Don't know why i didn't think of this before.  I called superstroke.  They have an attachment but it is designed for Arcos only. Next step.... purchase and reengineer 🙂  Franken Putter !

Hi mate, have you done this experiment? I've just got a new putter with a nice SuperStroke grip and want to continue to use by ShotScope but want a more clean solution than just glue it on the putter.

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Recently Browsing

    • No registered users viewing this page.
×
×
  • Create New...