goaliewales14 Posted July 16, 2020 Share Posted July 16, 2020 Has anyone ever switched up their putter hosel? I'm using the Ping Vault Oslo which has a double bend shaft making it a face balanced putter. After looking at everything, my putting stroke actually has a slight arc. I'm missing all my putts to the right since my stroke doesn't match my putter. I'm looking at switching the double bend and adding a plumber's neck adapter to give it some toe hang. Has anyone tried this? There are multiple adapters out there, but I was curious if it was worth it and how much toe hang it added to your putter. Also, does the length of the plumbers neck increase toe hang? Quote Driver: Callaway Rogue ST Max 3 Wood: Taylormade SIM 3 Utility Iron: Srixon U85 4i – 5i: Taylormade P790 6i – AW: Taylormade P770 SW: Taylormade MG3 TW Grind LW: Taylormade Hi-Toe 3 Low Bounce Putter: PXG Battle Ready One & Done Link to comment Share on other sites More sharing options...
Middler Posted July 16, 2020 Share Posted July 16, 2020 I don’t see where PING publishes toe hang, but their site shows “Stroke Type: Slight Arc, Straight” for the Ping Vault Oslo. And the (double bend) shaft enters close to the heel (unless you have a different model than the one linked below), does it really hang like a face balanced putter when you balance it? Nice putter BTW. https://ping.com/en-us/clubs/putters/ping-vault Quote Titleist TSR2 11° HZRDUS Red CB 50 6.0 w Lamkin UTx Midsize Titleist TSR2 16.5º HZRDUS Red 60 CB 6.0 & TSR2 21º HZRDUS Black 4G 70 6.0 w Lamkin UTx Midsize Mizuno JPX923 HMP 4-GW, T22 54.12WS, T22 58.04DC w Lamkin ST+2 Hybrid Midsize Evnroll EV5.3 Maxfli Tour & ProV1 Ping Pioneer - MGI Zip Navigator AT Payntr X 002 LE, Ecco Biom C4, Payntr X 001 F (Mesh) Link to comment Share on other sites More sharing options...
null Posted July 16, 2020 Share Posted July 16, 2020 I’d pay for a putter fitting before butchering your putter. You could be aiming left, your swing path could be left, you could be closings the face too fast because of the grip you use. Missing to one side doesn’t automatically correlate to mismatched toe hang LeftyHawk and RyanJohnson_Official 2 Quote Link to comment Share on other sites More sharing options...
cnosil Posted July 16, 2020 Share Posted July 16, 2020 Has anyone ever switched up their putter hosel? I'm using the Ping Vault Oslo which has a double bend shaft making it a face balanced putter. After looking at everything, my putting stroke actually has a slight arc. I'm missing all my putts to the right since my stroke doesn't match my putter. I'm looking at switching the double bend and adding a plumber's neck adapter to give it some toe hang. Has anyone tried this? There are multiple adapters out there, but I was curious if it was worth it and how much toe hang it added to your putter. Also, does the length of the plumbers neck increase toe hang?There are some aftermarket adapters that will let you switch the hosel. Typically they require a 90* bore since you are just going to epoxy in the new hosel. The best on requires a piece of a shaft that you can cut to desired length which gives you come control over the toe hang. The shorter the plumbers neck hosel the more to hang the putter will have. I would do this in a minute if I could find a cost effective adapter; they are typically pretty expensive since they are milled. You can do one of the hosel adapters from golfworks or similar company but I would personally get one of these; it is called a knuckle head adapter. https://www.ebay.com/itm/Plumbers-Neck-Putter-Conversion-RH-Adapter-Aluminum-3-Shaft-Hosel-Knuckle-Head-/152465152692 goaliewales14 1 Quote Driver: G400 Max 9* w/ KBS Tour Driven Fairway: TS3 15* w/Project X Hzardous Smoke Hybrids: 915H 21* w/KBS Tour Graphite Hybrid Prototype 915H 24* w/KBS Tour Graphite Hybrid Prototype Irons: TR20V 6-11 w/Vizard TR20-85 Graphite Wedge: 54/12D, 60/8M w/:Accra iWedge 90 Graphite Putter: Sacks Parente MC 3 Stripe Backup Putters: Milled Collection RSX 2, mFGP2, Futura 5W, TM-180 Member: MGS Hitsquad since 2017 Link to comment Share on other sites More sharing options...
goaliewales14 Posted July 16, 2020 Author Share Posted July 16, 2020 1 hour ago, cnosil said: There are some aftermarket adapters that will let you switch the hosel. Typically they require a 90* bore since you are just going to epoxy in the new hosel. The best on requires a piece of a shaft that you can cut to desired length which gives you come control over the toe hang. The shorter the plumbers neck hosel the more to hang the putter will have. I would do this in a minute if I could find a cost effective adapter; they are typically pretty expensive since they are milled. You can do one of the hosel adapters from golfworks or similar company but I would personally get one of these; it is called a knuckle head adapter. https://www.ebay.com/itm/Plumbers-Neck-Putter-Conversion-RH-Adapter-Aluminum-3-Shaft-Hosel-Knuckle-Head-/152465152692 Thank you!!! Quote Driver: Callaway Rogue ST Max 3 Wood: Taylormade SIM 3 Utility Iron: Srixon U85 4i – 5i: Taylormade P790 6i – AW: Taylormade P770 SW: Taylormade MG3 TW Grind LW: Taylormade Hi-Toe 3 Low Bounce Putter: PXG Battle Ready One & Done Link to comment Share on other sites More sharing options...
cnosil Posted July 16, 2020 Share Posted July 16, 2020 Thank you!!!No problem. People change out shafts and grips with little concern, this option isnsimilar; it is just a little epoxy and won’t be something you can’t undo. Will it help? I don’t know, but that is why you are doing the experiment. Quote Driver: G400 Max 9* w/ KBS Tour Driven Fairway: TS3 15* w/Project X Hzardous Smoke Hybrids: 915H 21* w/KBS Tour Graphite Hybrid Prototype 915H 24* w/KBS Tour Graphite Hybrid Prototype Irons: TR20V 6-11 w/Vizard TR20-85 Graphite Wedge: 54/12D, 60/8M w/:Accra iWedge 90 Graphite Putter: Sacks Parente MC 3 Stripe Backup Putters: Milled Collection RSX 2, mFGP2, Futura 5W, TM-180 Member: MGS Hitsquad since 2017 Link to comment Share on other sites More sharing options...
dlow206 Posted July 16, 2020 Share Posted July 16, 2020 8 hours ago, goaliewales14 said: Has anyone ever switched up their putter hosel? I'm using the Ping Vault Oslo which has a double bend shaft making it a face balanced putter. After looking at everything, my putting stroke actually has a slight arc. I'm missing all my putts to the right since my stroke doesn't match my putter. I'm looking at switching the double bend and adding a plumber's neck adapter to give it some toe hang. Has anyone tried this? There are multiple adapters out there, but I was curious if it was worth it and how much toe hang it added to your putter. Also, does the length of the plumbers neck increase toe hang? I believe that if toe hang is really the issue, a putter with more toe hang (given all else is equal) will cause you to miss more to the right. Quote Follow my golf journey to break into the 80s Tester for the Titleist TSi Driver Spring 2020 MGS Tester for the Fujikura Motore X Shaft Updated 07/15/2022 Driver: Rogue St Max LS - Autoflex Fairway Woods: Rogue Max St 3HL and 7 Wood Irons: JPX 921 Hot Metal 5 to AW - Aerotech Steelfiber i95 Stiff parallel tip Wedges: Glide 4.0 54 and 58 Putter: PLD Custom Kushin 4 Link to comment Share on other sites More sharing options...
goaliewales14 Posted July 16, 2020 Author Share Posted July 16, 2020 3 hours ago, Middler said: I don’t see where PING publishes toe hang, but their site shows “Stroke Type: Slight Arc, Straight” for the Ping Vault Oslo. And the (double bend) shaft enters close to the heel (unless you have a different model than the one linked below), does it really hang like a face balanced putter when you balance it? Nice putter BTW. https://ping.com/en-us/clubs/putters/ping-vault Yeah it's 100% face balanced. I love the putter cuz I actually have the stealth version of it and we had Ping custom paint it. That's the reason I'd love to make it work. 1 hour ago, jlukes said: I’d pay for a putter fitting before butchering your putter. You could be aiming left, your swing path could be left, you could be closings the face too fast because of the grip you use. Missing to one side doesn’t automatically correlate to mismatched toe hang I actually had one during the off season as part of a clinic, and they showed me I had a slight arc. I did one of those, I'm not so sure type of things. That's what lead me to start tracking stats on my misses. I went through the aim check, I set up to my putter and had my wife move a ball to where I "thought I was aimed." I was actually really good on that standpoint. I was a touch left. Then I recorded my stroke against my putting mat that has lines to check path. I even got out paper and string to check the alignment line to make sure it was straight. My wife thinks I've officially lost it by the way! I have been playing around with some of the putters they suggested during the fitting, Evnroll ER8, ER6 and even trying a few blades and all of those seem to be working so much better for me. aerospace_ray and JohnSmalls 2 Quote Driver: Callaway Rogue ST Max 3 Wood: Taylormade SIM 3 Utility Iron: Srixon U85 4i – 5i: Taylormade P790 6i – AW: Taylormade P770 SW: Taylormade MG3 TW Grind LW: Taylormade Hi-Toe 3 Low Bounce Putter: PXG Battle Ready One & Done Link to comment Share on other sites More sharing options...
cnosil Posted July 16, 2020 Share Posted July 16, 2020 I believe that if toe hang is really the issue, a putter with more toe hang (given all else is equal) will cause you to miss more to the right. Not necessarily. Toe hang has started to become a meaningless thing with regards to putters. People react to putters differently. For me, Face balanced putters tend to go farther right than putters with more toe hang. Lots of factors in fitting a putter. Quote Driver: G400 Max 9* w/ KBS Tour Driven Fairway: TS3 15* w/Project X Hzardous Smoke Hybrids: 915H 21* w/KBS Tour Graphite Hybrid Prototype 915H 24* w/KBS Tour Graphite Hybrid Prototype Irons: TR20V 6-11 w/Vizard TR20-85 Graphite Wedge: 54/12D, 60/8M w/:Accra iWedge 90 Graphite Putter: Sacks Parente MC 3 Stripe Backup Putters: Milled Collection RSX 2, mFGP2, Futura 5W, TM-180 Member: MGS Hitsquad since 2017 Link to comment Share on other sites More sharing options...
goaliewales14 Posted July 16, 2020 Author Share Posted July 16, 2020 (edited) 18 minutes ago, dlow206 said: I believe that if toe hang is really the issue, a putter with more toe hang (given all else is equal) will cause you to miss more to the right. Odyssey actually has something posted on their website in regards to toe hang. Hosel_Guide "For golfers who tend to miss putts to the right (toe hang helps close the face at impact if you have a tendency to leave it open)." I've also been trying to watch a lot of TXG videos on it since I trust their knowledge of everything when it comes to fittings just to make sure it wasn't just an OEM claiming "10 extra yards." I thought MGS did something similar in one of their putter Most Wanted's, but I haven't been able to find it. Edited July 16, 2020 by goaliewales14 Quote Driver: Callaway Rogue ST Max 3 Wood: Taylormade SIM 3 Utility Iron: Srixon U85 4i – 5i: Taylormade P790 6i – AW: Taylormade P770 SW: Taylormade MG3 TW Grind LW: Taylormade Hi-Toe 3 Low Bounce Putter: PXG Battle Ready One & Done Link to comment Share on other sites More sharing options...
dlow206 Posted July 16, 2020 Share Posted July 16, 2020 It is interesting how contradictory various sources are on this topic. This article says: "Also, your typical miss patterns could indicate a mismatch between you and the toe hang in your putter. If you miss a lot of putts to the right (for a right-handed golfer), a putter with less toe hang might help you correct that. Obviously, the reverse of that might also help you if you miss to the left often." http://www.golfwrx.com/518390/a-deep-dive-into-toe-hang-of-a-putter-and-why-it-matters/ goaliewales14 1 Quote Follow my golf journey to break into the 80s Tester for the Titleist TSi Driver Spring 2020 MGS Tester for the Fujikura Motore X Shaft Updated 07/15/2022 Driver: Rogue St Max LS - Autoflex Fairway Woods: Rogue Max St 3HL and 7 Wood Irons: JPX 921 Hot Metal 5 to AW - Aerotech Steelfiber i95 Stiff parallel tip Wedges: Glide 4.0 54 and 58 Putter: PLD Custom Kushin 4 Link to comment Share on other sites More sharing options...
goaliewales14 Posted July 16, 2020 Author Share Posted July 16, 2020 27 minutes ago, dlow206 said: It is interesting how contradictory various sources are on this topic. This article says: "Also, your typical miss patterns could indicate a mismatch between you and the toe hang in your putter. If you miss a lot of putts to the right (for a right-handed golfer), a putter with less toe hang might help you correct that. Obviously, the reverse of that might also help you if you miss to the left often." http://www.golfwrx.com/518390/a-deep-dive-into-toe-hang-of-a-putter-and-why-it-matters/ Golf is fun right?! Sounds like it's down to go hit different putters and see what helps/hurts you Quote Driver: Callaway Rogue ST Max 3 Wood: Taylormade SIM 3 Utility Iron: Srixon U85 4i – 5i: Taylormade P790 6i – AW: Taylormade P770 SW: Taylormade MG3 TW Grind LW: Taylormade Hi-Toe 3 Low Bounce Putter: PXG Battle Ready One & Done Link to comment Share on other sites More sharing options...
cnosil Posted July 16, 2020 Share Posted July 16, 2020 The general thought on toe hang is that the more toe hang the more the club will be open to the path during the stroke. When looking at putters you also need to consider your stroke, offset, weight, CoG location, etc. the best way is to put the club in your hands and see how it performs(startline and distance control)If you just look at toe hang consider this will two putters that are basically the same except for headweight perform the same? Think 45* of toe hang on both but one head weighs 335 grams and the other 375 grams. dlow206 and aerospace_ray 2 Quote Driver: G400 Max 9* w/ KBS Tour Driven Fairway: TS3 15* w/Project X Hzardous Smoke Hybrids: 915H 21* w/KBS Tour Graphite Hybrid Prototype 915H 24* w/KBS Tour Graphite Hybrid Prototype Irons: TR20V 6-11 w/Vizard TR20-85 Graphite Wedge: 54/12D, 60/8M w/:Accra iWedge 90 Graphite Putter: Sacks Parente MC 3 Stripe Backup Putters: Milled Collection RSX 2, mFGP2, Futura 5W, TM-180 Member: MGS Hitsquad since 2017 Link to comment Share on other sites More sharing options...
dlow206 Posted July 16, 2020 Share Posted July 16, 2020 10 minutes ago, cnosil said: The general thought on toe hang is that the more toe hang the more the club will be open to the path during the stroke. When looking at putters you also need to consider your stroke, offset, weight, CoG location, etc. the best way is to put the club in your hands and see how it performs(startline and distance control) If you just look at toe hang consider this will two putters that are basically the same except for headweight perform the same? Think 45* of toe hang on both but one head weighs 335 grams and the other 375 grams. And on top of those factors, for me, shape has some sort of mental impact on me. I have two face balanced putters, pretty close on headweight, same length, etc., but drastically different head shapes. One is a Squareback (wide blade) and one is the Evnroll ER10 mallet. Maybe its my ADHD, but I start to get distracted by the shape of the ER10 and all that is going on with the shape. And then that starts to impact my putting. With the Squareback, its much more simple looking and less distracting, and I also am more confident that it is lined up correctly. cnosil 1 Quote Follow my golf journey to break into the 80s Tester for the Titleist TSi Driver Spring 2020 MGS Tester for the Fujikura Motore X Shaft Updated 07/15/2022 Driver: Rogue St Max LS - Autoflex Fairway Woods: Rogue Max St 3HL and 7 Wood Irons: JPX 921 Hot Metal 5 to AW - Aerotech Steelfiber i95 Stiff parallel tip Wedges: Glide 4.0 54 and 58 Putter: PLD Custom Kushin 4 Link to comment Share on other sites More sharing options...
cnosil Posted July 16, 2020 Share Posted July 16, 2020 And on top of those factors, for me, shape has some sort of mental impact on me. I have two face balanced putters, pretty close on headweight, same length, etc., but drastically different head shapes. One is a Squareback (wide blade) and one is the Evnroll ER10 mallet. Maybe its my ADHD, but I start to get distracted by the shape of the ER10 and all that is going on with the shape. And then that starts to impact my putting. With the Squareback, its much more simple looking and less distracting, and I also am more confident that it is lined up correctly.There are lots of factors just as you mentioned. You can add alignment aids, colors. Lots of things influence the stroke. The big takeaway is that you can’t just say I need a putter that has X amount of toehang. dlow206 1 Quote Driver: G400 Max 9* w/ KBS Tour Driven Fairway: TS3 15* w/Project X Hzardous Smoke Hybrids: 915H 21* w/KBS Tour Graphite Hybrid Prototype 915H 24* w/KBS Tour Graphite Hybrid Prototype Irons: TR20V 6-11 w/Vizard TR20-85 Graphite Wedge: 54/12D, 60/8M w/:Accra iWedge 90 Graphite Putter: Sacks Parente MC 3 Stripe Backup Putters: Milled Collection RSX 2, mFGP2, Futura 5W, TM-180 Member: MGS Hitsquad since 2017 Link to comment Share on other sites More sharing options...
aerospace_ray Posted July 16, 2020 Share Posted July 16, 2020 7 hours ago, goaliewales14 said: Yeah it's 100% face balanced. I love the putter cuz I actually have the stealth version of it and we had Ping custom paint it. That's the reason I'd love to make it work. I actually had one during the off season as part of a clinic, and they showed me I had a slight arc. I did one of those, I'm not so sure type of things. That's what lead me to start tracking stats on my misses. I went through the aim check, I set up to my putter and had my wife move a ball to where I "thought I was aimed." I was actually really good on that standpoint. I was a touch left. Then I recorded my stroke against my putting mat that has lines to check path. I even got out paper and string to check the alignment line to make sure it was straight. My wife thinks I've officially lost it by the way! I have been playing around with some of the putters they suggested during the fitting, Evnroll ER8, ER6 and even trying a few blades and all of those seem to be working so much better for me. Have done just about everything shared in this thread and more (buying components a long time that had interchangeable hosels for example). Several SAM putter fittings helped me/my instructor identify the rate of putter face closure and aoa I was producing at impact/ and the amount of loft I would have needed putt with based on my old putting stroke. Since that time (few years ago) I have worked on mechanics and experienced drastic consistency improvements. Before SAM putter fittings I did practice / work hard but depending which type putter I had I was basically learning to time my putts with a bad putting motion/stroke in order to get the ball close to hole. At that time I thought I was strong arc based on reading articles and listening to people offering me help. With knowledge learned from putter fittings/instruction my work the last few years appears to have gotten me to slight arc stroke per new fittings/instructor observance both with mild toe hang putters and face balanced. Today I feel my putting is simplified as I have a motion/stroke I trust. Just wanted to share my experience. goaliewales14 1 Quote Link to comment Share on other sites More sharing options...
goaliewales14 Posted July 16, 2020 Author Share Posted July 16, 2020 I actually contacted Ping today just for fun and they said if I send them back the putter, they can convert it for $28 and then ship it back for another $15! Guess who's getting their putter changed?!?! cnosil and aerospace_ray 2 Quote Driver: Callaway Rogue ST Max 3 Wood: Taylormade SIM 3 Utility Iron: Srixon U85 4i – 5i: Taylormade P790 6i – AW: Taylormade P770 SW: Taylormade MG3 TW Grind LW: Taylormade Hi-Toe 3 Low Bounce Putter: PXG Battle Ready One & Done Link to comment Share on other sites More sharing options...
Dave_Burgess Posted July 24, 2020 Share Posted July 24, 2020 I’ve been kicking around the idea of adding some lead to the toe of my face balanced tomcat c center shaft putter. Any thoughts to make it slightly toe heavy? Quote “RTX-4” pin hunter (because I’m a lousy putter) Link to comment Share on other sites More sharing options...
aerospace_ray Posted July 24, 2020 Share Posted July 24, 2020 2 hours ago, Dave_Burgess said: I’ve been kicking around the idea of adding some lead to the toe of my face balanced tomcat c center shaft putter. Any thoughts to make it slightly toe heavy? Is it the Cadence TR TomCat model? And also heavy or light version? Quote Link to comment Share on other sites More sharing options...
goaliewales14 Posted July 24, 2020 Author Share Posted July 24, 2020 12 hours ago, Dave_Burgess said: I’ve been kicking around the idea of adding some lead to the toe of my face balanced tomcat c center shaft putter. Any thoughts to make it slightly toe heavy? I thought about trying that at first, but the one thing you have to remember is if you mess with the weight, you could mess with the distance control. Being a center shafted putter, I'm guessing you'd have to add more weight to get your desired toe hang vs. what I would have had to do with mine. If you had too much weight you could end up hammering all of your putts with the weight not matching your stroke anymore. You'd probably need to look into getting a Super Stroke grip that you can add the weights too in the grip to counter balance the amount of lead tape. Quote Driver: Callaway Rogue ST Max 3 Wood: Taylormade SIM 3 Utility Iron: Srixon U85 4i – 5i: Taylormade P790 6i – AW: Taylormade P770 SW: Taylormade MG3 TW Grind LW: Taylormade Hi-Toe 3 Low Bounce Putter: PXG Battle Ready One & Done Link to comment Share on other sites More sharing options...
Dave_Burgess Posted July 27, 2020 Share Posted July 27, 2020 Update: I added 2 grams to the toe of my tomcat c cadence tr center shaft putter and couldn’t have rolled the ball any better. Speed was spot on and the ball left the face without chatter (Bermuda greens here in Memphis) and rolled right on line. It might look like a Frankenstein putter but it works! goaliewales14 1 Quote “RTX-4” pin hunter (because I’m a lousy putter) Link to comment Share on other sites More sharing options...
bluesmandan76 Posted July 28, 2020 Share Posted July 28, 2020 You can bend the shaft to adjust toe hang. Simple 3/8 pipe bender. Flatten the lie by bending it near the putter head, then bend it just above that spot to return the shaft upright again and voila you’ve got toe hang. Sent from my iPhone using Tapatalk Quote Driver: TM M1 9.5* 4W: Wishon bent FLAT Irons: Mizuno MP20MB Wedges: 50/55/60 Mizuno Putter: Evnroll ER2 Link to comment Share on other sites More sharing options...
goaliewales14 Posted July 28, 2020 Author Share Posted July 28, 2020 My putter just came back from Ping and it looks better than ever! First couple rolls make it seem like it was 100% the right call!! cnosil 1 Quote Driver: Callaway Rogue ST Max 3 Wood: Taylormade SIM 3 Utility Iron: Srixon U85 4i – 5i: Taylormade P790 6i – AW: Taylormade P770 SW: Taylormade MG3 TW Grind LW: Taylormade Hi-Toe 3 Low Bounce Putter: PXG Battle Ready One & Done Link to comment Share on other sites More sharing options...
driveandputtmachine Posted August 12, 2020 Share Posted August 12, 2020 I owned a small boutique putter company and fit numerous golfers from amateurs to a few pros. Toe hang is the most mis-understood spec in putters. First off toe hang can help or hurt you, I think everyone understands that. However, how it helps or how it hurts is different for every person. If you are missing right more toe hang could hurt you or it could help you. How to be a good putter. 1. Read the greens properly 2. Aim your putter properly 3. Return the club to your target line 4. Hit it the desired speed to take the break you see ---- See it's very simple. The last three people I helped had the same issue. The were missing too many putts left, their AIM was pretty good(used lasers and a mirror to determine) yet all three hit some good putts, but their putts were 50% left of center, 35% center and 15% right of center. Each one of these folks responded to toe hang differently. One guy went into a putter with almost 6 o'clock toe hang. His shots went to 20% left of center, 70% center and 10% still right of center. Another went into a putter with about a 4:30 toe hang and was similar. The last we are still working on. We are having trouble finding a putter he can align properly on short and long putts and make a good stroke with. What he aligns well his stroke cannot return the face back properly often enough to suit me. Everyone responds to putter shape and how the shaft is attached in a different way as far as aligning as well. No it is not just about eye dominance, but that can definitely play a factor. As I have gotten older I can no longer aim a putter with a plumber's neck hosel correctly anymore. I have tried and tried as the old "anser" style is the most pleasing for me to look down on, but the first thing after learning to read greens properly is to aim your putter on that line. === Want to learn to read greens properly? Grab a stimpmeter or a similar type of v groove device. Find a putt, put a tee in the ground, vary the angle of the stimp to get the ball to finish 1' past the hole or however far past you think your proper speed should be. Once you have that, find the start line at that angle to make the putt go into the center of the hole. You can use that across a putting green to get better at reading putts with proper speed and re-training your brain. Chances are you have learned how to read based on your improper stroke and have to retrain yourself for a putter you can aim correctly and return to position correctly more often than not. mr.paintmaker 1 Quote Clubs in great standing Driver - Callaway Epic Max LS - Rogue White 130 MSI TX 3 Wood - Taylormade 300 Mini 13.5 - UST Mamiya Black 79X 5 Wood - Taylormade Sim Max - HZRDOUS smoke black 6.5 Irons - Srixon ZX5 5 iron, Srixon ZX7 (6-9) - Recoil 110 F5 Wedges - Cleveland 46, 50*, 54*, & 60* Zipcore mid bounce - Recoil 110 F5 Putter - Mannkrafted MA/66 - UST Frequency Filter, LAB MEZZ.1 - BGT Stability Clubs in good standing(fighting for one spot).... 7 Wood - Company that shall not be named - UST Mamiya Black 79TX | Util - Callaway Apex X Forged UTIL 21* - AD-DI | Util - Srixon ZXU 18* - Recoil 110 F5 | Util - Callaway UW 19* - HZRDOUS smoke black 6.5 Clubs that need a timeout/replacing Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.