Jump to content

.370 tip in a .355 hosel


Recommended Posts

I would recommend using the 3 drill bore set from Golfworks and adjust the hosel to .370 as opposed to sanding which may or may not work

depending on the shafts, the accuracy of the sanding etc etc.  Boreing the hosel is a relatively simple process.  You have 3 drills that are progressively wider that ultimately remove the taper in the hosel resulting in a .370 parallel hosel.  All you need is the drill set and a vice

 

Link to comment
Share on other sites

11 hours ago, John S said:

I would recommend using the 3 drill bore set from Golfworks and adjust the hosel to .370 as opposed to sanding which may or may not work

depending on the shafts, the accuracy of the sanding etc etc.  Boreing the hosel is a relatively simple process.  You have 3 drills that are progressively wider that ultimately remove the taper in the hosel resulting in a .370 parallel hosel.  All you need is the drill set and a vice

 

I did as John S mentions above and he is right - it really isn't difficult and if I can do it, well then anyone can 🙂

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

 Share

×
×
  • Create New...