Jump to content

Recommended Posts

Our Sponsors

Anyone please advise if it is possible to remove Graphite Design YSQ 45 gram driver shaft which is fitted in old RBZ Driver and fit into Titleist 913D2 Driver head.

Yes it is possible. Would need to pull the shaft and Put on the adapter. Shafts are shafts and can be moved from club to club.

Some things to consider:

Look at the tip size for both drivers to make sure they are the same or what you might have to do to make it fit if they aren’t.

Depending on bore depth you may get a different length driver

depending on the amount of shaft prep that was required it may not all get covered up

Don’t pull a graphite shaft unless you have the right tools since you could damage the tip and
Make it unusable.

The shaft may not work well/perform the same in the new driver

Driver:  :ping-small: G400 Max 9* with UST Proforce V2
Fairway: :titelist-small: TS3 15* set  to 16.5* w/Project X Hzardous Smoke
Hybrids:  :titelist-small: 816H1 19* set at 18* w/KBS Tour Graphite Hybrid Prototype
                :titelist-small: 915H  21*  w/KBS Tour Graphite Hybrid Prototype
               :titelist-small: 915H 24*  w/KBS Tour Graphite Hybrid Prototype
Irons:      :srixon-small: 765 6-AW with KBS Tour shafts
Wedge:  :cleveland-small: 588 54-14, 58-12
Putter:  :odyssey-small: Ten S      Backups:  :bobby-grace-1: 6330,   :EVNROLL: ER2.2,  


Member:  MGS Hitsquad since 2017697979773_DSCN2368(Custom).JPG.a1a25f5e430d9eebae93c5d652cbd4b9.JPG


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Create New...